BAL Drive Recorder Mirror User Manual

1. Ọja Ipariview

The BAL Drive Recorder Mirror Model 5600 is a high-performance dash camera designed to provide comprehensive front and rear recording for your vehicle. It integrates seamlessly into your car as a rearview mirror, offering a wide and clear view of the road ahead and behind. Equipped with advanced features like GPS, WDR, and G-sensor, it ensures reliable recording and enhanced safety on your journeys.

olusin 1: Iwaju view of the BAL Drive Recorder Mirror.

This device is compatible with both 12V and 24V vehicle electrical systems. Its full-screen 9.7-inch IPS LCD touch panel provides intuitive control and a vivid display. The front and rear cameras both capture footage in high-definition 2-megapixel resolution, ensuring clear and detailed recordings.

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• BAL Drive Recorder Mirror Main Unit
• Rear Camera (Waterproof and Dustproof, IEC standard IP65 compliant)
• Rear Camera Cable (7 meters)
• Power Cable (for 12V/24V vehicle power outlet)
• Eriali GPS
• Mounting Straps/Adhesive Mounts
• 16GB Class 10 microSD Card (pre-inserted in main unit)
• Afowoyi Olumulo (iwe-ipamọ yii)

Àwòrán 2: Àkójọ ọjà àti àwọn ohun èlò tó wà nínú rẹ̀.

3. Awọn ẹya Ọja

• Dual Full HD Recording: Simultaneous 2-megapixel recording from both front and rear cameras.
• Ibiti Yiyipo (WDR): Enhances video quality in varying light conditions, ensuring clear footagkódà ní alẹ́.
• GPS ti a dapọ: Records vehicle location and speed data along with video footage.
• G-Sensọ: Automatically detects impacts and locks the current recording to prevent overwriting.
• Ipo Abojuto Paaki: Monitors your vehicle for impacts while parked, providing security.
• 9.7-inch IPS Touch Panel: Large, clear, and responsive display for easy operation and viewing.
• Iṣẹ́ Kamera Ẹ̀yìn: Waterproof and dustproof rear camera (IP65) can be linked with reverse gear for use as a rear monitor.
• LED Signal Compatible: Ensures stable recording even with different LED signal frequencies (East/West Japan).
• Lẹnsi adijositabulu: The front camera lens can be horizontally extended and adjusted vertically/horizontally for optimal positioning.

4. Eto ati fifi sori

4.1. Device Components and Ports

Familiarize yourself with the main unit's layout and connection points:

olusin 3: Ẹyìn view of the main unit, indicating GPS, TF (microSD), AV-IN, and USB ports.

• Ibudo GPS: Connect the external GPS antenna here.
• TF (microSD) Slot: Insert the provided 16GB Class 10 microSD card.
• Ibudo AV-IN: Connect the rear camera cable here.
• Ibudo USB: For power connection and data transfer.
• Lẹnsi Kamẹra iwaju: Located on the left side (when facing the mirror).
• Agbọrọsọ: For audio playback and alerts.

4.2. Fifi sori Igbesẹ

1. Fi kaadi microSD sii: Ensure the provided 16GB Class 10 microSD card is securely inserted into the TF slot on the main unit.
2. Fi Ẹrọ Akọkọ sori ẹrọ: Attach the drive recorder mirror over your existing rearview mirror using the included straps or adhesive mounts. Ensure it is securely fastened and does not obstruct your view.
3. So Kamẹra Tẹhin pọ:
   • Route the 7-meter rear camera cable from the main unit to the desired mounting location for the rear camera (e.g., rear windshield or license plate area).
   • Connect the rear camera to the AV-IN port on the main unit.
   • Secure the rear camera in place. If connecting for reverse gear linkage, consult a professional for proper wiring to your vehicle's reverse light circuit.
4. So Antenna GPS pọ: Plug the GPS antenna into the dedicated GPS port on the main unit. Mount the antenna in a location with a clear view of the sky, typically on the dashboard or near the windshield.
5. So agbara: Plug the power cable into the USB port on the main unit and connect the other end to your vehicle's 12V/24V power outlet (cigarette lighter socket). Route the cable neatly to avoid interference with driving.
6. Ṣàtúnṣe lẹ́ńsì: The front camera lens can be pulled out horizontally and adjusted vertically or horizontally to capture the optimal view of the road. Adjust it to ensure the road ahead is centered in the recording frame.

Figure 4: Attaching the drive recorder mirror to the existing rearview mirror using straps.

5. Awọn ilana Iṣiṣẹ

5.1. Agbara Tan / Paa

Ẹrọ naa yoo tan-an laifọwọyi yoo bẹrẹ gbigbasilẹ nigbati titan ọkọ rẹ ba wa ni titan. Yoo pa a laifọwọyi nigbati ina ba wa ni pipa.

5.2. Ipilẹ Gbigbasilẹ

Upon powering on, the device enters continuous recording mode. Both front and rear cameras will record simultaneously. The recording status is indicated on the display.

5.3. Iṣakoso Ifihan

• Yipada Views: Slide your finger left or right on the touch screen to quickly switch between front camera view, ru kamẹra view, tabi pipin-iboju view (if supported).
• Títúnṣe Viewigun Angle: Slide your finger up or down on the touch screen to adjust the vertical viewing angle of the displayed camera feed.
• Titan/Pa iboju: Tap the power button briefly to turn the display on or off while recording continues in the background.

Figure 5: The drive recorder mirror installed, providing a clear view ti opopona.

5.4. GPS Iṣẹ

With the GPS antenna connected, the device will automatically record your vehicle's location and speed data along with the video footage. This data can be viewed using the dedicated PC viewer software (not included, typically downloadable from manufacturer's webaaye).

5.5. Sensọ G-Sensọ ati Gbigbasilẹ Pajawiri

The built-in G-sensor detects sudden impacts or collisions. When an impact is detected, the device automatically triggers emergency recording, saving the current video segment to a protected folder on the microSD card, preventing it from being overwritten by continuous recording.

5.6. Ipo Abojuto Paaki

When the vehicle is parked and the ignition is off, the parking surveillance mode activates. If an impact is detected (e.g., a bump or collision), the device will automatically wake up and record a short video segment. This feature requires a continuous power supply or a dedicated hardwire kit (sold separately) to function when the vehicle is off.

5.7. Rear Monitor Function

If the rear camera is properly wired to your vehicle's reverse light circuit, the display will automatically switch to the full rear camera view when you engage reverse gear, assisting with parking maneuvers.

6. Itọju

• Ninu: Use a soft, dry cloth to clean the display and camera lenses. Do not use abrasive cleaners or solvents.
• microSD Card Management:
  • Regularly format the microSD card (at least once a month) using the device's menu settings to ensure optimal performance and prevent data corruption.
  • Replace the microSD card periodically (e.g., every 6-12 months) as continuous recording can wear out the card.
  • Always power off the device before inserting or removing the microSD card to prevent data loss or card damage.
• Awọn imudojuiwọn famuwia: Check the official BAL website periodically for any available firmware updates to ensure your device has the latest features and bug fixes.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information, please refer to the warranty card included with your product or visit the official BAL webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.

If you encounter any issues not covered in this manual or require further assistance, please contact BAL customer support through their official webaaye tabi alaye olubasọrọ ti a pese lori apoti ọja.

Official BAL Webojula: BAL Official Store on Amazon.co.jp