Kicker 46KISLOC2 K-Series Stereo Line-Output Converter User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of the Kicker 46KISLOC2 K-Series Stereo Line-Output Converter. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

The Kicker 46KISLOC2 is designed to integrate aftermarket amplifiers with factory car audio systems by converting speaker-level signals into high-quality RCA line-level signals. It also provides a remote turn-on output for ampalifiers.

Key Awọn ẹya ara ẹrọ

• Converts speaker-level signals to RCA line-level signals.
• Provides a powerful 100 milli-amp, 12-volt remote turn-on output using DC offset, eliminating the need for a separate switched 12V source.
• Accepts input signals up to 55 watts (16 volts).
• Delivers an output signal up to 8 volts.
• Maintains a flat 20Hz-20kHz frequency response at all volume levels.
• Compatible with standard radios and most smart radios (amplifier output of smart radio must have 60Ω impedance or lower).
• Features an LED indicator for DC offset turn-on.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Kicker 46KISLOC2 Line-Output Converter unit
• Afowoyi Olumulo (iwe-ipamọ yii)

Alaye Aabo

IKILO:

• Nigbagbogbo ge asopọ batiri ọkọ ṣaaju ṣiṣe eyikeyi iṣẹ itanna.
• Ensure proper wiring and connections to prevent short circuits or damage to the unit or vehicle's electrical system.
• Kan si onimọran ẹrọ afetigbọ ọkọ ayọkẹlẹ ti o ba ni idaniloju nipa awọn igbesẹ fifi sori ẹrọ eyikeyi.
• Ma ṣe fi ẹrọ naa han si ọrinrin tabi awọn iwọn otutu to gaju.

Eto ati fifi sori

The KISLOC2 is designed for straightforward installation. Follow these steps carefully:

Aworan onirin

Refer to the diagram below for proper wiring connections. The KISLOC2 features input wires for speaker signals and output RCA jacks for line-level signals, plus a remote turn-on wire.

Image: Detailed wiring diagram for the Kicker 46KISLOC2, showing input wires (White: L+, White/BLK: L-, Grey: R+, Grey/BLK: R-, Black: Chassis Gnd) and output connections (Blue: 12V Remote out (100mA), RCAx2: Line level out). A red LED indicates DC offset turn-on activity.

Awọn Igbesẹ Asopọmọra

1. Identify Speaker Wires: Locate the speaker wires from your factory radio or amplifier that you intend to use as input for the KISLOC2. Typically, these are the rear speaker wires for subwoofer applications or full-range speakers for multi-channel amplifier setups.
2. Connect Input Wires:
   • Sopọ awọn Funfun wire to the Left (+) speaker wire.
   • Sopọ awọn Funfun/dudu wire to the Left (-) speaker wire.
   • Sopọ awọn Grẹy wire to the Right (+) speaker wire.
   • Sopọ awọn Grẹy/dudu wire to the Right (-) speaker wire.
   • Sopọ awọn Dudu wire to a reliable chassis ground point in the vehicle.
3. Connect RCA Outputs: Plug your RCA cables from the KISLOC2's RCA output jacks into the RCA input jacks of your aftermarket amplifier.
4. Connect Remote Turn-On: Sopọ awọn Buluu wire from the KISLOC2 to the remote turn-on input of your aftermarket amplifier(s). This wire provides a 12V signal to turn on the amplifier when the factory radio is active.
5. Ṣe aabo Ẹka naa: Mount the KISLOC2 in a secure, dry location away from excessive heat or moisture. Ensure wires are not pinched or exposed to sharp edges.

Aworan: Iwaju view of the Kicker 46KISLOC2 Line-Output Converter, showing the main unit with multiple colored wires extending from one end and two RCA output jacks on the other end. The KICKER logo is visible on the top surface.

Aworan: Angled view of the Kicker 46KISLOC2 Line-Output Converter, showcasing the compact black housing, the array of input wires, and the dual RCA output ports. The KICKER branding is visible on the top surface.

Isẹ

Once properly installed, the KISLOC2 operates automatically. It senses the audio signal from your factory radio and converts it to a line-level signal for your amplifier. The integrated DC offset detection activates the remote turn-on output.

• Agbara Tan: When your factory radio is turned on, the KISLOC2 will detect the DC offset in the speaker signal and activate its remote turn-on output (blue wire), signaling your amplifier to turn on. A red LED on the unit will illuminate to indicate active DC offset turn-on.
• Ijade ohun: The converted line-level audio signal will be sent through the RCA outputs to your amplifier.
• Agbara Pa: When the factory radio is turned off, the KISLOC2 will cease to detect the DC offset, and the remote turn-on output will deactivate, turning off your amplifier.

Itoju

The Kicker 46KISLOC2 is designed for maintenance-free operation. No user-serviceable parts are inside. To ensure longevity:

• Jeki ẹyọ naa di mimọ ati ofe kuro ninu eruku ati idoti.
• Rí i dájú pé gbogbo àwọn ìsopọ̀ wáyà wà ní ààbò àti láìsí ìbàjẹ́.
• Avoid exposing the unit to extreme temperatures or direct sunlight.

Laasigbotitusita

If you experience issues with your KISLOC2, refer to the following common problems and solutions:

Awọn pato

Alaye atilẹyin ọja

Kicker products are warranted against defects in material and workmanship for a period of one (1) year from the date of original purchase. Please retain your sales receipt as proof of purchase. This warranty is valid only for the original purchaser and is not transferable.

The warranty does not cover damage due to improper installation, accident, misuse, abuse, negligence, normal wear and tear, or unauthorized modification. For full warranty terms and conditions, please refer to the official Kicker website or contact Kicker customer support.

Onibara Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Kicker customer support:

• Webojula: www.kicker.com
• Foonu: Refer to the Kicker webAaye fun agbegbe awọn nọmba olubasọrọ.
• Imeeli: Refer to the Kicker webojula fun support adirẹsi imeeli.

When contacting support, please have your product model number (46KISLOC2) and proof of purchase ready.