Oris Big Crown Pointer Date User Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the Oris Big Crown Pointer Date Automatic Stainless Steel Red Dial Mens Watch, Model 01 754 7741 4068-07 8 20 22. Please read this manual carefully to ensure proper use, setup, and maintenance of your timepiece. Retain this manual for future reference.

olusin 1: Iwaju view of the Oris Big Crown Pointer Date watch, showcasing its distinctive red dial, large Arabic numerals, and pointer date hand.

Ọja Pariview

The Oris Big Crown Pointer Date is an automatic mechanical watch known for its distinctive oversized crown and a central pointer hand that indicates the date. It features a multi-piece stainless steel case, a double-domed sapphire crystal, and an exhibition caseback revealing the Oris caliber 754 automatic movement.

Awọn ẹya pataki:

• Gbigbe: Oris Caliber 754, Swiss automatic, 28,800 vibrations per hour.
• Ifipamọ Agbara: O fẹrẹ to awọn wakati 38.
• Ọran: 40 mm multi-piece stainless steel.
• Crystal: Double-domed sapphire, anti-reflective coating on the inside.
• Pe: Burgundy red with luminescent silver-tone cathedral hands and white Arabic numerals.
• Date Indication: Central pointer hand with red crescent tip.
• Ade: Oversized, fluted stainless steel.
• Omi Resistance: 50 mita (165 ẹsẹ).
• Ẹgba: Multi-piece stainless steel with security folding clasp.
• Apoti: Exhibition, screw-in, mineral glass.

olusin 2: Ẹgbẹ profile of the watch, highlighting the distinctive oversized fluted crown and the case thickness.

Ṣeto

Iyika Ibẹrẹ:

As an automatic watch, the Oris Big Crown Pointer Date is powered by the motion of your wrist. However, for initial setup or after a period of inactivity, manual winding is recommended to build up the power reserve.

1. Gently unscrew the crown counter-clockwise until it pops out to position 1 (winding position).
2. Turn the crown clockwise approximately 20-30 times. This will initiate the movement and build a sufficient power reserve.
3. The watch will begin to run.

Ṣiṣeto Aago ati Ọjọ:

1. Pull the crown out to position 2 (time setting position). The seconds hand will stop.
2. Turn the crown clockwise or counter-clockwise to set the hour and minute hands. Ensure you set the correct AM/PM time, as the date change occurs around midnight.
3. Once the time is set, push the crown back in to position 1.
4. To set the date, pull the crown out to position 1 (winding position).
5. Turn the crown counter-clockwise to advance the pointer date hand to the desired date.
6. Once the date is set, gently push the crown back in and screw it down clockwise until it is fully secured against the case. This ensures water resistance.

Ṣiṣẹ iṣọwo rẹ

Yiyi Aifọwọyi:

Once the watch is running, normal daily wear will keep the mainspring wound. The rotor, visible through the exhibition caseback, rotates with wrist movement, winding the watch automatically. If the watch is worn regularly (8-10 hours a day), it should maintain its power reserve.

olusin 3: Ẹyìn view of the watch, displaying the transparent exhibition caseback which allows viewing of the Oris Caliber 754 automatic movement and its red rotor.

Omi Resistance:

Your Oris Big Crown Pointer Date watch is water-resistant up to 50 meters (165 feet). This rating means it is suitable for short periods of recreational swimming, but not for diving or prolonged submersion. Always ensure the crown is fully screwed down before exposing the watch to water.

• 50m (5 ATM): Suitable for showering, bathing, and shallow swimming.
• Ko dara fun: Snorkeling, diving, or high-impact water sports.

Avoid operating the crown or pushers (if any) when the watch is wet or submerged, as this can compromise water resistance.

Itoju

Ninu:

To maintain the appearance of your watch, regularly wipe the case and bracelet with a soft, dry cloth. For stainless steel components, a slightly damp asọ le ṣee lo, atẹle nipa gbigbe lẹsẹkẹsẹ. Yago fun lilo awọn kẹmika lile tabi awọn ohun elo abrasive.

Ibi ipamọ:

When not wearing your watch, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. A watch box or pouch is ideal for protection.

Ṣiṣẹ:

Mechanical watches require periodic servicing to ensure optimal performance and longevity. Oris recommends a full service every 3-5 years. This service typically includes cleaning, lubrication, and adjustment of the movement, as well as replacement of seals to maintain water resistance.

For authorized service, please visit the official Oris website or contact an authorized Oris service center. Oris Service Information

Laasigbotitusita

Awọn pato

• Nọmba awoṣe: 01 754 7741 4068-07 8 20 22
• Brand: Oris
• Gbigbe: Oris Caliber 754 (base Sellita SW200-1 with Oris Pointer Date module)
• Ohun elo ọran: Multi-piece stainless steel
• Opin Ọran: 40 mm
• Crystal: Double-domed sapphire, anti-reflective coating inside
• Apoti: Stainless steel, screw-in, transparent mineral glass
• Ade: Stainless steel, screw-in, oversized
• Omi Resistance: Pẹpẹ mẹta (mita 5 / 50 ẹsẹ)
• Awọ ipe: Burgundy Pupa
• Ọwọ: Silver-tone, luminescent (Super-LumiNova)
• Indices: White Arabic numerals, luminescent
• Ẹgba: Multi-piece stainless steel
• Kilaipi: Security folding clasp
• Ifipamọ Agbara: wakati meji 38
• Awọn gbigbọn: 28'800 A/h, 4 Hz
• Iyebiye: 26
• Awọn iwọn ọja: 7.87 x 5.91 x 1.97 inches; 8.82 iwon

Atilẹyin ọja ati Support

Your Oris watch is covered by a manufacturer's warranty against defects in materials and workmanship. The standard warranty period is typically two years from the date of purchase. Registering your watch on the official Oris website may extend this warranty.

For detailed warranty terms, registration, and support, please visit the official Oris website or contact an authorized Oris dealer or service center.

• Official Oris Webojula: www.oris.ch
• Iṣẹ & Atilẹyin: Oris Service Page

Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.