OREI 4K HDMI Extender EX-165C+ Instruction Manual

1. Ifihan

The OREI EX-165C+ HDMI Extender allows for the transmission of a 1080P HDMI signal up to 50 meters (165 feet) using a single Cat5e/6/7 Ethernet cable. This device is compliant with HDMI 1.4 and HDCP 1.4 standards, ensuring compatibility with a wide range of audio-visual equipment. It features a one-way IR pass-through for remote control of source devices, an HDMI loop output on the transmitter for local monitoring, and Power Over Cable (POC) functionality, simplifying installation by requiring power only at the transmitter unit.

2. Ohun ti o wa ninu Apoti

• 1 x HDMI Extender Transmitter Unit
• 1 x HDMI Extender Receiver Unit
• 1 x IR Blaster USB
• 1 x Okun olugba IR
• 1 x 5V DC Power Adapter
• 1 x Itọsọna olumulo

Image: The OREI EX-165C+ HDMI Extender package contents, showing the transmitter and receiver units, IR cables, and power adapter.

3. Ọja Ipariview

3.1 Transmitter Unit (TX)

The transmitter unit connects to your HDMI source device and features an HDMI input, an HDMI loop output for local display, a Cat port for the Ethernet cable, an IR Out port for the IR Blaster, and a DC 5V power input.

Aworan: Apa view of the transmitter unit, highlighting its various ports.

3.2 Ẹka olugba (RX)

The receiver unit connects to your HDMI display and features an HDMI output, a Cat port for the Ethernet cable, and an IR In port for the IR Receiver. This unit is powered via Power Over Cable (POC) from the transmitter, eliminating the need for a separate power adapter at the display location.

Aworan: Apa view of the receiver unit, highlighting its various ports.

4. Awọn ilana iṣeto

1. So HDMI Orisun: Connect an HDMI cable from your source device (e.g., PC, game console, Blu-ray player) to the HDMI-IN port on the Transmitter unit.
2. So Ifihan Agbegbe pọ (Aṣayan): If local monitoring is desired, connect an HDMI cable from the HDMI LOOP OUT port on the Transmitter unit to a local HDMI display.
3. So okun Ethernet pọ: Use a single Cat5e/6/7 Ethernet cable to connect the NLA port on the Transmitter unit to the NLA port on the Receiver unit. Ensure the cable is of good quality for optimal performance and distance.
4. Sopọ HDMI Ifihan: So okun HDMI kan pọ lati HDMI Jade port on the Receiver unit to your remote HDMI display (e.g., TV, projector).
5. Connect IR Cables:
   • Connect the IR Blaster cable to the IR Jade port on the Transmitter unit and position the IR emitter near the IR sensor of your source device.
   • So okùn olugba IR pọ mọ IR IN port on the Receiver unit and position the IR receiver in a location where it can receive signals from your remote control.
6. Fi agbara: So adapter agbara DC 5V ti a pese pọ mọ DC 5V port on the Transmitter unit. The Receiver unit will be powered automatically via Power Over Cable (POC).
7. Agbara Lori Awọn ẹrọ: Power on your HDMI source device and all connected displays. The extender should automatically establish the connection.

Image: A diagram illustrating the connection process for the OREI EX-165C+ HDMI Extender.

Oṣo Video Itọsọna

Video: A detailed guide on how to set up and use the OREI EX-165C+ HDMI Extender.

5. Awọn ilana Iṣiṣẹ

Once properly set up, the OREI EX-165C+ HDMI Extender operates automatically. The HDMI signal from your source device will be transmitted over the Ethernet cable to the remote display. The HDMI loop output on the transmitter allows for simultaneous viewing on a local display.

5.1 IR Pass-Through

The IR pass-through function allows you to control your HDMI source device from the remote display location. Point your remote control at the IR Receiver connected to the Receiver unit. The signal will be transmitted back to the IR Blaster connected to the Transmitter unit, which will then control your source device.

Image: Illustration of the IR transmission feature, showing compatibility with various devices.

5.2 Awọn ipinnu atilẹyin

The extender supports a range of HDMI resolutions and frequencies, ensuring high-quality video transmission:

• 480i @ 60Hz
• 480p @ 60Hz
• 576i @ 60Hz
• 576p @ 50Hz
• 720p @ 50/60Hz
• 1080i @ 50/60Hz
• 1080P @ 50/60Hz

It utilizes M-Jpeg compression for efficient transmission with minimal image quality loss.

6. Itọju

To ensure the longevity and optimal performance of your OREI EX-165C+ HDMI Extender, follow these maintenance guidelines:

• Keep the units in a cool, dry place away from direct sunlight, heat sources, and moisture.
• Fi aṣọ gbígbẹ tàbí omi wẹ́wẹ́. Má ṣe lo àwọn ohun èlò ìfọmọ́ omi tàbí aerosol.
• Rí i dájú pé gbogbo àwọn okùn náà so pọ̀ dáadáa, wọn kò sì ní ṣòro láti tẹ̀ wọ́n. Yẹra fún títẹ̀ wọ́n dáadáa.
• Periodically check for firmware updates on the OREI website, if available, to ensure the best performance and compatibility.

7. Laasigbotitusita

If you encounter issues with your HDMI extender, refer to the following common troubleshooting steps:

• Kò sí Àwòrán/Àmì:
  • Ensure all HDMI and Ethernet cables are securely connected.
  • Verify that the power adapter is correctly connected to the Transmitter unit and that the power indicator light is on.
  • Check if the HDMI source device and display are powered on and set to the correct input.
  • Test the HDMI cables directly between the source and display to rule out cable issues.
  • Ensure the Ethernet cable is a Cat5e/6/7 cable and is not damaged. Try a shorter cable if possible.
  • Reduce the resolution of the source device to see if a signal is established.
• IR Remote Control Not Working:
  • Ensure the IR Blaster is positioned directly over the IR sensor of the source device.
  • Ensure the IR Receiver is positioned to receive signals from your remote control.
  • Check that the IR cables are securely plugged into the correct ports on both the Transmitter and Receiver units.
  • Verify that the remote control itself is functioning correctly (e.g., fresh batteries).
• Poor Picture Quality/Flickering:
  • Use a high-quality Cat6 or Cat7 Ethernet cable, especially for longer distances.
  • Ensure the Ethernet cable is not running parallel to power lines or other sources of electromagnetic interference.
  • Check if the resolution and refresh rate of the source device are within the supported specifications of the extender and display.

8. Awọn pato

Image: Detailed technical specifications and dimensions of the extender units.

9. Atilẹyin ọja ati Support

For warranty information and technical support, please contact OREI directly. You can reach them via email at info@orei.com. Please refer to the official OREI website or the product packaging for the most up-to-date warranty terms and conditions.