Ọrọ Iṣaaju
This instruction manual provides important information for the safe installation, operation, and maintenance of your BESTTEN 15 Amp Decorator Receptacle Outlet. Please read this manual thoroughly before installation and keep it for future reference.

Image: BESTTEN 15 Amp Decorator Receptacle Outlet with included wallplate, showcasing its clean design and UL listing.
Alaye Aabo
IKILO: Ewu ti Ina mọnamọna tabi Ina.
- Installation must be performed by a qualified electrician or a knowledgeable person in accordance with all national and local electrical codes.
- Turn off power at the circuit breaker or fuse box before wiring.
- Use only copper wire. Do not use with aluminum wire.
- Rii daju pe gbogbo awọn asopọ waya wa ni aabo ati idabobo daradara.
- Do not exceed the maximum electrical rating of 15A/125V/1875W.
Ohun ti o wa ninu Apoti
- Decorator Receptacle Outlets (Quantity as per pack size, e.g., 30)
- Decorator Wallplates
- Iṣagbesori skru
Awọn pato
| Nọmba awoṣe | LD-3012 |
| Itanna Itanna | 15A/125V/1875W |
| Ọja Mefa | 4.5"L x 1.29"W x 0.04"D (Outlet: 4.06"H x 1.29"W x 0.98"D) |
| Ohun elo | Polycarbonate (PC) |
| Àwọ̀ | Funfun |
| Awọn iwe-ẹri | UL/CUL Akojọ |

Image: Detailed product dimensions for the BESTTEN 15 Amp Decorator Receptacle Outlet and its accompanying wallplate.
Awọn ilana fifi sori ẹrọ
- Pa Agbara: Locate the circuit breaker or fuse box controlling the outlet you intend to replace or install. Turn off the power to that circuit. Verify power is off using a voltage idanwo.
- Yọ Ile Itaja Atijọ kuro (ti o ba wulo): Unscrew and carefully remove the old wallplate and outlet from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
- Mura Awọn okun waya: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure wires are straight and free of nicks.
- Awọn isopọ Waya: Connect the wires to the new BESTTEN receptacle. This outlet supports both side wiring and quick back push-in wiring.
- Waya Ilẹ (Ewe tabi Ejò Ti Ko Ni Ohun Kan): Sopọ si awọn alawọ grounding dabaru.
- Wáyà Dídúró (Fúúfù): Connect to the silver terminal screws or use the back push-in holes for neutral.
- Hot Wire (Black): Connect to the brass terminal screws or use the back push-in holes for hot.

Image: Wiring diagram illustrating both side wiring (for 12 AWG & 14 AWG) and back wiring (for 14 AWG only) methods for the receptacle.
Note: For split receptacle applications, break off the tabs between the hot terminals to allow two-circuit conversion.
- So iṣan naa sori ẹrọ: Carefully fold the wires into the electrical box. Secure the receptacle to the electrical box using the provided mounting screws. The plaster ears can be broken off for flush alignment if needed.
- Fi sori ẹrọ Iṣẹṣọ ogiri: Attach the decorator wallplate over the installed receptacle using the provided screws.
- Pada Agbara pada: Tan agbara pada si ẹrọ fifọ tabi apoti fiusi.
- Idanwo: Plug a device into the outlet to ensure it is functioning correctly.
Isẹ
The BESTTEN 15 Amp Decorator Receptacle Outlet functions as a standard electrical outlet. Once properly installed and powered, simply insert the plug of your electrical device into the receptacle slots. Ensure the plug is fully inserted for a secure connection.
Itoju
- Ninu: To clean the outlet and wallplate, ensure power is off at the circuit breaker. Wipe with a soft, damp asọ. Ma ṣe lo abrasive ose tabi epo.
- Ayewo: Periodically inspect the outlet for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and have the outlet inspected and replaced by a qualified professional.
Laasigbotitusita
- No Power to Outlet:
- Check the circuit breaker or fuse box to ensure the circuit is on.
- Daju pe gbogbo awọn asopọ waya wa ni aabo.
- Ensure the outlet is properly wired (hot, neutral, ground).
- Plug Does Not Insert Easily:
- This outlet is non-tamper-resistant. If a plug does not insert easily, ensure it is aligned correctly. Do not force the plug.
Atilẹyin ọja ati Support
BESTTEN products are designed for durability and performance. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.