DAOKI GR-US-093
DAOKI GR-US-093 4-Pin Tactile Push Button Switch User Manual
Model: GR-US-093 | Brand: DAOKI
Ọrọ Iṣaaju
This manual provides essential information for the DAOKI GR-US-093 4-Pin Tactile Push Button Switch. These momentary switches are designed for a wide range of electronic applications, offering reliable performance and a compact form factor. Each package contains 100 units of the 6x6x4.3mm switch.
Image: A collection of DAOKI 4-pin tactile push button switches, illustrating their compact size and design.
Eto ati fifi sori
The DAOKI GR-US-093 tactile switches are designed for PCB (Printed Circuit Board) mounting. Proper installation ensures optimal performance and longevity.
Iṣagbesori
- These switches feature a 4-pin DIP (Dual In-line Package) configuration, suitable for through-hole mounting on a PCB.
- Ensure the PCB has appropriate pads and holes spaced for a 6x6mm switch footprint.
- The switch is designed for snap-in mounting, providing a secure fit before soldering.
Tita
- Use a soldering iron with a fine tip and appropriate solder for electronic components.
- Apply heat to the pin and PCB pad simultaneously, then introduce solder to create a strong electrical and mechanical connection.
- Avoid excessive heat or prolonged contact, which can damage the switch or PCB.
Aworan: A sunmọ-soke view of several DAOKI tactile switches, highlighting their 4-pin design for PCB integration.
Awọn ilana Iṣiṣẹ
The DAOKI GR-US-093 is a momentary action switch. This means the switch makes contact only while the button is being pressed and returns to its open state when released.
- Iru iṣe: Momentary (SPST - Single Pole, Single Throw).
- Iṣẹ: When the button is pressed, the internal contacts close, completing a circuit. When released, the contacts open, breaking the circuit.
- Awọn ohun elo: Ideal for input devices requiring a temporary signal, such as reset buttons, menu navigation, or simple on/off controls in electronic projects.
Fidio Afihan
Video: A demonstration of a momentary tactile switch, showing its operation and physical characteristics. This video is provided by a seller and illustrates the general functionality of similar switches.
Itoju
These tactile switches are generally maintenance-free. However, following these guidelines can help ensure their longevity:
- Ninu: If necessary, gently clean the exterior of the switch with a dry, soft cloth. Avoid using liquid cleaners directly on the switch, especially near the button mechanism or pins.
- Ayika: Operate and store switches within the specified temperature range of -25°C to +80°C. Avoid environments with excessive dust, moisture, or corrosive gases.
- Wahala ti ara: Do not apply excessive force to the button or pins during installation or operation, as this can cause mechanical damage.
Laasigbotitusita
If you encounter issues with your DAOKI tactile switches, consider the following common troubleshooting steps:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Yipada ko dahun | Poor solder joint, incorrect wiring, damaged switch. | Check solder connections for continuity. Verify wiring against circuit diagram. Replace switch if damaged. |
| Intermittent contact | Loose connection, internal contamination, worn contacts. | Re-solder connections. Ensure clean operating environment. Replace switch if contacts are worn. |
| Button feels stiff or stuck | Debris under button, physical damage, incorrect mounting. | Gently attempt to dislodge debris. Inspect for physical damage. Ensure switch is mounted correctly and not under stress. |
Awọn pato ọja
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | GR-US-093 |
| Iru | Tactile Push Button Switch |
| Ise Iru | Ìgbà díẹ̀ |
| Nọmba PIN | 4 Pin DIP |
| Awọn iwọn (L x W x H) | 6 x 6 x 4.3 mm (0.24 x 0.24 x 0.17 inch) |
| Button Diameter | 3.5 mm (0.14 inch) |
| Koju Voltage | AC250V |
| Ti won won fifuye | DC12V 50mA |
| Olubasọrọ Resistance | ≤0.03Ω |
| Idabobo Resistance | ≥100MΩ |
| Awọn iwọn otutu ti nṣiṣẹ | -25°C si +80°C |
| Ohun elo | Plastic, Metal, Electric Parts |
| IP Rating | IP54 |
| Package Opoiye | 100 ona |
Afikun Ọja Views
Fidio: Ipariview of a similar batch of tactile switches, showcasing their quantity and individual appearance. This video is provided by a seller and offers a visual reference for the product.
Video: A detailed look at various tactile pushbutton switches, demonstrating different form factors and their common applications. This video is provided by a seller and serves as a general guide for tactile switch types.
Atilẹyin ọja ati Support
For specific warranty information or technical support regarding your DAOKI GR-US-093 tactile switches, please refer to the seller's return policy or contact the manufacturer directly through their official channels. Keep your purchase receipt for any warranty claims.
Olupese: DAOKI
ASIN: B07X8S99RH
UPC: 886769927860
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.