Axis M7104 Video Encoder User Manual

1. Ifihan

The Axis M7104 Video Encoder is designed to integrate analog CCTV cameras into an IP-based video surveillance system. This device digitizes analog video signals, allowing them to be viewed, recorded, and managed over a network. It supports various video surveillance and security system applications, providing a bridge between traditional analog infrastructure and modern IP network capabilities.

Nọmba 1: Axis M7104 Video Encoder. This image shows the front of the video encoder, highlighting its compact design and various input/output ports for connecting analog cameras and network cables.

2. Alaye Aabo

• Lilo inu ile Nikan: This device is designed for indoor use. Do not expose it to outdoor elements, moisture, or extreme temperatures.
• Ibi ti ina elekitiriki ti nwa: Use only the power adapter supplied with the device or a compatible power supply specified by Axis Communications.
• Afẹfẹ: Ensure proper ventilation around the device to prevent overheating. Do not block ventilation openings.
• Iṣagbesori: Mount the device securely on a stable surface or rack.
• Ninu: Yọ agbara kuro ṣaaju ki o to nu. Lo aṣọ gbigbẹ ti o rọ. Maṣe lo awọn ohun elo afọmọ olomi tabi aerosol.
• Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Axis M7104 Video Encoder Unit
• Adapter agbara
• Installation Guide / Documentation
• Àmì ìfisílé (tí ó bá wúlò)

4. Eto

4.1 Ti ara Awọn isopọ

1. Connect Analog Cameras: Connect your analog CCTV cameras to the video input ports on the Axis M7104 using coaxial cables. The encoder typically features multiple BNC connectors for this purpose.
2. Sopọ si Nẹtiwọọki: Connect an Ethernet cable (Cat 6 recommended) from the RJ45 network port on the encoder to your network switch or router. Ensure the network connection is active.
3. So agbara: Plug the power adapter into the encoder's power input and then into a suitable power outlet. The device will power on automatically.

4.2 Iṣeto ni ibẹrẹ

After connecting the hardware, you will need to configure the encoder via its web ni wiwo:

• Ṣawari Ẹrọ: Use the Axis IP Utility or Axis Device Manager software to discover the encoder on your network and obtain its IP address.
• Wiwọle Web Ni wiwo: Ṣii a web browser and enter the encoder's IP address. You will be prompted to set a root password for the device.
• Configure Video Streams: Laarin awọn web interface, configure video settings for each connected camera, including resolution, frame rate (e.g., 30 Hz), compression, and streaming profiles.
• Eto nẹtiwọki: Adjust network settings such as static IP address, DNS, and gateway if required by your network infrastructure.

5. Operating the Video Encoder

Once configured, the Axis M7104 Video Encoder operates by continuously digitizing and streaming video from connected analog cameras over the network. It is primarily used for video surveillance and security systems.

• Gbe View: Access live video streams from connected cameras through a compatible Video Management Software (VMS) or directly via the encoder's web ni wiwo.
• Gbigbasilẹ: Integrate the encoder with a Network Video Recorder (NVR) or VMS for continuous or event-triggered recording of video streams.
• Ìṣàkóso Àwọn Ìṣẹ̀lẹ̀: Configure event triggers (e.g., motion detection, external input) and corresponding actions (e.g., send notifications, start recording) through the encoder's web interface or VMS.
• Wiwọle Latọna jijin: Access video streams and manage the encoder remotely via a secure network connection, often facilitated by your VMS or network configuration.

6. Itọju

• Ninu: Periodically clean the exterior of the encoder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
• Awọn imudojuiwọn famuwia: Regularly check the Axis Communications website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Axis for firmware update procedures.
• Awọn ipo Ayika: Ensure the operating environment remains within the specified temperature and humidity ranges for indoor use to prevent damage and ensure longevity.

7. Laasigbotitusita

Awọn oran ti o wọpọ ati Awọn ojutu:

• Ko si Agbara:
  • Verify the power adapter is securely connected to both the encoder and a working power outlet.
  • Ṣayẹwo boya iṣan agbara jẹ iṣẹ-ṣiṣe.
• Ko si Isopọ Nẹtiwọọki:
  • Ensure the Ethernet cable is properly connected to the RJ45 port on the encoder and the network switch/router.
  • Check the network status lights on the encoder and the switch.
  • Verify network settings (IP address, subnet mask, gateway) are correct.
  • Try restarting the encoder and the network switch.
• Ko si Ifihan fidio:
  • Confirm that analog cameras are properly connected to the coaxial video input ports.
  • Ensure cameras are powered on and functioning correctly.
  • Check video settings in the encoder's web interface for the specific channel.
• Ko le Wiwọle Web Ni wiwo:
  • Verify the encoder's IP address is correct and reachable from your computer.
  • Ensure your computer is on the same network segment as the encoder.
  • Paarẹ fun igba diẹ eyikeyi ogiriina tabi sọfitiwia antivirus lori kọnputa rẹ ti o le dina wiwọle.
  • Try using the Axis IP Utility to rediscover the device.

8. Awọn pato

9. Atilẹyin ọja ati Support

For detailed warranty information, technical support, and additional resources, please visit the official Axis Communications website. You can find product documentation, FAQs, and contact information for customer service.

Osise Webojula: www.axis.com

When contacting support, please have your product model number (01679-001) and serial number ready.