Ọrọ Iṣaaju
O ṣeun fun riraasing the Caliber Alarm Clock with QI Charging Station. This device combines a digital alarm clock with a convenient wireless charging pad and a USB charging port, designed to simplify your bedside setup. It also features an adjustable night light and a large LED display for clear visibility.
This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new alarm clock. Please read it thoroughly before use to ensure optimal performance and longevity of the product.
Ṣeto
Ṣii silẹ: Carefully remove the alarm clock from its packaging. Ensure all components are present: the alarm clock unit and the power adapter.
Asopọ agbara: Connect the provided power adapter to the DC input port on the back of the alarm clock. Plug the other end of the adapter into a standard wall outlet. The display will illuminate.
Aworan: Apa view of the alarm clock, illustrating the power input port (left) and the USB output port (right).
Battery Installation (Backup): The unit includes 1 Lithium Ion battery for backup. This battery maintains time settings during power outages. No user installation is typically required for this pre-installed battery.
Eto Aago Ibẹrẹ: Upon first power-up, the clock may display a default time or require manual setting. Refer to the "Operating" section for detailed instructions on setting the time.
Awọn ilana Iṣiṣẹ
Eto Aago ati Ọjọ
- Tẹ mọlẹ Akoko SET button (location may vary, typically on the back or top) until the hour digits flash.
- Lo awọn + or - awọn bọtini lati ṣatunṣe awọn wakati.
- Tẹ Akoko SET again to move to minutes, then adjust with + or -.
- Repeat for year, month, and day if applicable.
- Tẹ Akoko SET one last time to confirm and exit.
Eto Awọn itaniji
- Tẹ mọlẹ ALAGBARA SET button (or similar) until the alarm hour digits flash.
- Ṣatunṣe wakati itaniji ati iṣẹju nipa lilo awọn + or - awọn bọtini.
- Tẹ ALAGBARA SET lati jẹrisi.
- Lati mu itaniji ṣiṣẹ/mu ma ṣiṣẹ, tẹ awọn IKỌ NIPA / PA bọtini. Aami itaniji yoo han/farahan loju iboju.
- Nigbati itaniji ba dun, tẹ bọtini naa ṢEGBE button for a temporary pause, or any other button to turn it off for the day.
Using the QI Wireless Charging Station
The alarm clock features a built-in QI wireless charging pad for compatible devices.
- Ensure the alarm clock is powered on.
- Place your QI-compatible smartphone or device directly onto the charging pad, centering it over the logo QI.
- A charging indicator (e.g., an LED light or on-screen icon) will illuminate to confirm charging has begun. If charging does not start, reposition your device.
Image: A smartphone placed on the QI charging pad of the alarm clock, showing the charging interface on the phone screen.
Image: The alarm clock with a phone positioned on its wireless charging surface, indicating active charging.
Lilo Ibudo Ngba agbara USB
A USB output port is available on the side of the unit for charging non-QI compatible devices or for faster wired charging.
- Connect your device's USB charging cable to the USB output port on the alarm clock.
- So opin keji okun waya naa mọ ẹrọ rẹ. Gbigba agbara yoo bẹrẹ laifọwọsi.
Adjusting Display Brightness and Night Light
- The alarm clock features adjustable display brightness. Look for a DIMMER or Imọlẹ button, typically on the back or top. Press it repeatedly to cycle through brightness levels.
- To activate or adjust the night light, locate the dedicated LIGHT ORU button. Press it to turn the light on/off or cycle through different brightness settings if available.
Itoju
- Ninu: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the alarm clock. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- Ibi ipamọ: Ti o ba tọju ẹyọ naa fun akoko ti o gbooro sii, ge asopọ kuro ni agbara ki o tọju rẹ si ibi ti o tutu, ti o gbẹ.
- Mimu: Avoid dropping the unit or subjecting it to strong impacts. Keep it away from water and high humidity.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ifihan aago ko ṣofo. | Ko si agbara asopọ. | Rí i dájú pé ohun tí a fi ń so agbára náà mọ́ ẹ̀rọ náà dáadáa àti ibi tí ó ń ṣiṣẹ́ lórí ògiri. |
| QI charging not working. | Device not QI-compatible; device not properly aligned; foreign objects on pad; phone case too thick. | Verify device compatibility. Reposition device on the center of the pad. Remove any foreign objects. Remove thick phone cases. |
| Itaniji ko dun. | A kò mu itaniji ṣiṣẹ; iwọn didun kere ju; akoko itaniji ti ko tọ. | Ensure the alarm icon is displayed. Check alarm volume settings. Verify the alarm time is set correctly. |
| Akoko ko tọ. | Time not set correctly; power interruption. | Reset the time manually. If power was interrupted, the backup battery should maintain time, but a manual check is recommended. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Caliber |
| Nọmba awoṣe | HCG018QI/W |
| Àwọ̀ | Funfun |
| Ifihan Iru | Oni-nọmba |
| Pataki Ẹya | Night light, QI charging station, USB charging port |
| Orisun agbara | Okun Itanna |
| Ọja Mefa | 7.09 x 4.25 x 3.86 inches |
| Iwọn Nkan | 7.9 iwon (225 Giramu) |
| Awọn batiri | 1 Batiri Lithium ion (pẹlu, fun afẹyinti) |
| GTIN | 08714505047157 |
Atilẹyin ọja ati Support
This Caliber product is designed for reliability and performance. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Caliber webojula.
Should you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Caliber customer support. Contact details can typically be found on the product packaging or the manufacturer's official webojula.