TIMEX TW2T76500

Timex Intelligent Quartz Compass Chronograph Watch TW2T76500 User Manual

1. Ọja Ipariview

This manual provides instructions for the Timex Intelligent Quartz Compass Chronograph Analog Watch, model TW2T76500. This timepiece features an analog display with Intelligent Quartz technology, integrating a compass and chronograph function. It is designed for durability with a stainless steel case, mineral dial glass, and a fabric band.

Timex Intelligent Quartz Compass Chronograph Watch on a wrist

Figure 1.1: Timex Intelligent Quartz Compass Chronograph Watch (Model TW2T76500) on a wrist.

Sun mo tipetipe view of the Timex Intelligent Quartz Compass Chronograph Watch face

Figure 1.2: Close-up of the watch dial, showing chronograph subdials and compass markings.

2. Ni ibẹrẹ Oṣo

Upon receiving your watch, perform the following steps to ensure proper function:

  1. Unboxing: Fi ìṣọ́ra yọ aago náà kúrò nínú àpótí rẹ̀. Ṣe àyẹ̀wò bóyá ó ti bàjẹ́.
  2. Àpótí ìdìpọ̀ aago Timex

    Figure 2.1: The Timex watch is supplied in a protective box.

  3. Crown Protector: If present, remove any plastic crown protector.
  4. Eto akoko: Pull the crown (the knob on the side of the watch) out to its outermost position. Rotate the crown to set the correct time. Push the crown back in completely to start the watch movement.
  5. Date Setting (if applicable): If your watch includes a date function, pull the crown out to the middle position and rotate it to set the correct date. Push the crown back in completely.

3. Awọn ilana Iṣiṣẹ

3.1. Eto Aago ati Ọjọ

  1. Àkókò: Pull the crown to the outermost position. Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands. Once set, push the crown back to the normal operating position.
  2. Ọjọ: Pull the crown to the middle position. Rotate the crown to advance the date. Avoid setting the date between 9 PM and 3 AM to prevent damage to the movement. Once set, push the crown back to the normal operating position.

3.2. Lilo iṣẹ Chronograph

The chronograph allows for precise timing of events.

  1. Bẹrẹ: Press the upper pusher (button) to start the chronograph. The chronograph second hand will begin to move.
  2. Duro: Press the upper pusher again to stop the chronograph. The elapsed time will be displayed on the chronograph subdials.
  3. Tun: After stopping, press the lower pusher to reset the chronograph hands to their zero positions.
  4. Àkókò Pínpín (tí ó bá wúlò): Some chronographs allow for split time measurement. Consult the specific watch diagram for your model if this feature is present.

3.3. Using the Compass Function

The Intelligent Quartz compass feature provides directional guidance.

  1. Mu Kompasi ṣiṣẹ: Typically, the compass function is activated by pressing a specific pusher (often the lower pusher) or by pulling the crown to a specific position. Refer to your watch's specific markings.
  2. Ṣíṣe àtúnṣe (tí ó bá pọndandan): For accurate readings, the compass may require calibration. This usually involves rotating the watch in a figure-eight pattern or following on-screen prompts if a digital display is present.
  3. Ka Itọsọna: Hold the watch horizontally. The compass hand will point North. The bezel may be rotated to align with North for easier navigation.
  4. Mu Kompasi ṣiṣẹ: Press the pusher again or push the crown back to its normal position to return to timekeeping mode.

4. Itọju

4.1. Ninu

  • Mu ese aago ati gara pẹlu asọ ti o gbẹ.
  • For fabric bands, a damp cloth with mild soap can be used, but ensure the band is thoroughly dry before wearing.
  • Yẹra fún lílo àwọn kẹ́míkà líle tàbí àwọn ohun èlò ìpalára, nítorí pé èyí lè ba ìparí aago náà jẹ́.

4.2. Omi Resistance

This watch is water-resistant. Refer to the specifications for the exact water resistance level.

  • Ma ṣe ṣisẹ ade tabi awọn titari nigbati aago ba tutu tabi ti inu omi.
  • Avoid exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the seals.
  • Ti aago naa ba farahan si omi iyọ, fi omi ṣan pẹlu omi tutu ati ki o gbẹ daradara.
Image illustrating water resistance of a watch

Figure 4.1: Illustration of water resistance, indicating care instructions.

4.3. Batiri Rirọpo

When the watch stops or the second hand begins to jump in 2-second intervals, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and function. The watch uses a standard button cell battery.

5. Laasigbotitusita

IsoroOwun to le FaOjutu
Wo ko nṣiṣẹBattery depleted; Crown not pushed in; Watch needs service.Replace battery; Push crown in completely; Contact service center.
Akoko ko tọTime not set correctly; Watch stopped.Reset time as per instructions; Check battery.
Àwọn ọwọ́ Chronograph kò tún padà sí òdoRequires calibration; Mechanical issue.Consult service center for calibration or repair.
Compass reading is inaccurateNeeds calibration; Magnetic interference.Recalibrate compass; Move away from strong magnetic fields (e.g., electronics).
Ọrinrin lábẹ́ kírísítàWater resistance compromised; Exposure to extreme temperature changes.Immediately take to a service center to prevent further damage.

6. Awọn pato

Ẹya ara ẹrọẸ̀kúnrẹ́rẹ́
Nọmba awoṣeTW2T76500
BrandTIMEX
Iṣipopada IruKuotisi
Ifihan IruAnalog
Kiakia AwọAlagara
Ohun elo ọranIrin ti ko njepata
Case Opin45 Milimita
Ọran Sisanra18 Milimita
Ohun èlò díìlì díìlìEruku
Ohun elo BandAṣọ
Band AwọBrown
Tiipa IruIdinku
Pataki Awọn ẹya ara ẹrọChronograph, Compass
Omi Resistance IpeleOmi sooro
Iwọn Nkan300 g (0.3 kilo)
Batiri1 Watch Battery (included)

7. Atilẹyin ọja ati Support

Your Timex watch comes with a 1-year manufacturer warranty from the date of purchase.

7.1. How to Avail Warranty

  • To claim your warranty, you must present either the original bill copy/invoice or the warranty card at any authorized Timex service center.

7.2. Olubasọrọ Alaye