AVANTEK Add-On Plug-in Receiver RB-1 Instruction Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of your AVANTEK Add-On Plug-in Receiver RB-1. Please read this manual thoroughly before use and retain it for future reference.

Ohun ti o wa ninu Apoti

• AVANTEK Add-On Plug-In Receiver RB-1

Note: This product is an add-on receiver. A compatible AVANTEK doorbell transmitter (sold separately) is required for full functionality.

Awọn pato

Eto ati Sisopọ

Follow these steps to pair your AVANTEK Add-On Plug-in Receiver RB-1 with a compatible transmitter:

1. Plug the receiver into a standard power socket.
2. Press and hold the Volume button on the receiver for 3 seconds to enter pairing mode. The indicator light will blink.
3. Press the transmitter button. The receiver will chime "ding dong" to indicate that pairing is complete.

Awọn akọsilẹ lori Sisopọ:

• To exit pairing mode, press any button on the receiver or wait for 60 seconds.
• The receiver has two indication lights (blue and red). The blue light is the default and will illuminate during the first pairing. The red light will illuminate during the second pairing. The two colors will alternate with subsequent pairings.
• One doorbell system supports up to 2 transmitters and an unlimited number of receivers.

Awọn ilana Iṣiṣẹ

Atunse iwọn didun:

The receiver offers 5 adjustable volume levels, with a maximum setting of 115 dB. Use the dedicated volume buttons on the side of the receiver to increase or decrease the sound level. When muted, the flashing light will still signal that the doorbell has been pressed.

Aṣayan Chime:

Choose from 52 melodies using the "Next" or "Previous" buttons located on the side of the receiver. The 29 mm stereo speaker ensures rich and crisp sound.

Iṣẹ Iranti:

The receiver unit is equipped with a memory function that retains your last set melody and volume level. This ensures your preferences are saved even after a power outage, imukuro iwulo lati tunto awọn eto.

Itoju

• Keep the receiver clean by wiping it with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
• Ensure the receiver is plugged into a stable power source.
• The doorbell transmitter (not included with this add-on receiver) typically uses a CR2032 lithium-ion battery, which may last up to 3 years with average use. Refer to your transmitter's manual for specific battery replacement instructions.

Laasigbotitusita

Receiver not chiming:

• Rí i dájú pé a so olugba naa mọ́ inú ihò agbára tí ó wà láàyè dáadáa.
• Verify that the volume is not set to mute. Adjust the volume using the side buttons.
• Re-pair the receiver with the transmitter by following the "Setup and Pairing" instructions.
• Check the battery in your doorbell transmitter (if applicable). Replace if necessary.

Awọn ọrọ sisọ pọ:

• Confirm that your transmitter is an AVANTEK plug-in doorbell model compatible with the RB-1 receiver (e.g., CB-11, D-3B, etc.). This receiver is not compatible with AVANTEK battery-operated doorbell kits (Model: BA-11/WA-11) or other brands.
• For doorbell systems purchased before 2021, compatibility may vary. Contact AVANTEK support for assistance.
• Ensure the receiver is in pairing mode (blinking indicator light) before pressing the transmitter button.

Atilẹyin ọja ati Support

Specific warranty information is not provided in the product details. For warranty claims, technical support, or further inquiries, please refer to the contact information provided in your original product packaging or visit the official AVANTEK webojula.