Moukey MAMP1 220W Bluetooth Dual Channel Power Ampitanna

1. Ifihan

O ṣeun fun riraasing the Moukey MAMP1 220W Bluetooth Dual Channel Power Amplifier. Eyi amplifier is designed to provide powerful and versatile audio amplification for various applications, including karaoke, home theater systems, and general audio playback. It features multiple input options, Bluetooth 5.0 connectivity, and intuitive controls for an enhanced audio experience. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's performance.

2. Awọn ilana aabo

Láti dènà ìkọlù iná mànàmáná, iná, tàbí ìbàjẹ́ sí ẹ̀rọ náà, jọ̀wọ́ tẹ̀lé àwọn ìlànà ààbò wọ̀nyí:

• Ma ṣe fi ẹrọ yii han si ojo tabi ọrinrin.
• Maṣe ṣii casing. Ko si awọn ẹya ti olumulo-iṣẹ ninu. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
• Rii daju pe ipese agbara voltage ibaamu awọn ibeere pato lori kuro.
• Place the unit on a stable, flat surface with adequate ventilation. Do not block ventilation openings.
• Keep the unit away from heat sources, direct sunlight, and excessive dust.
• Disconnect the power plug from the outlet if the unit will not be used for an extended period.
• Maṣe ṣiṣẹ ẹrọ pẹlu ọwọ tutu.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Moukey MAMP1 Agbara Amplifier Unit
• Isakoṣo latọna jijin
• Eriali FM
• Iwe afọwọkọ olumulo (iwe yii)

4. Ọja Ipariview

4.1 Front Panel Controls and Functions

The front panel provides access to all primary controls and input ports for easy operation.

Image: Detailed diagram of the Moukey MAMP1 front panel, highlighting each control and port with corresponding numbers.

1. Agbara Yi pada: Yipada ẹyọ naa tan tabi pa.
2. USB / SD Slot: Fun ohun afetigbọ files from USB drives (max 32GB) or SD cards (max 16GB).
3. Bọtini Ipo: Cycles through input modes (Bluetooth, USB, SD, AUX, FM).
4. Bọtini BT: Directly switches to Bluetooth mode.
5. Prev Button: Skips to the previous track/station.
6. Bọtini Mu / Sinmi: Ṣiṣẹ tabi daduro ṣiṣiṣẹsẹhin ohun.
7. Bọtini atẹle: Skips to the next track/station.
8. Ifihan LED: Shows current mode, track information, or frequency.
9. Folder / Track: Navigates through folders or tracks on USB/SD.
10. Knob Iwọn didun Titunto: Satunṣe awọn ìwò o wu iwọn didun.
11. Jack agbekari: 3.5mm output for monitor headphones.
12. Microphone 1 Input: 6.35mm jack for microphone connection.
13. Microphone 2 Input: 6.35mm jack for a second microphone connection.
14. Kokoro Iwọn Gbohungbohun: Adjusts the volume of connected microphones.
15. Echo Knob: Controls the echo effect for microphones.
16. Knob Bass: Ṣe atunṣe iṣelọpọ ohun-igbohunsafẹfẹ kekere.
17. Knob Treble: Ṣe atunṣe iṣẹjade ohun igbohunsafẹfẹ giga-giga.
18. Knob iwontunwonsi: Ṣe atunṣe iwọntunwọnsi ikanni osi/ọtun.
19. Jack Input AX: Ìtẹ̀síwájú 3.5mm fún àwọn ẹ̀rọ ohùn ìta.
20. Aṣayan Input: Rotary switch to select between CD, AUX, DVD, and MP3/W inputs.

4.2 Ru Panel Awọn isopọ

The rear panel houses the main audio input and output connections.

Aworan: Ẹyin view of the Moukey MAMP1 amplifier, showing all input and output ports.

Image: Detailed diagram of the Moukey MAMP1 rear panel, highlighting each connection point.

1. Audio Input for DVD (RCA): Connect DVD players or other audio sources.
2. Audio Input for CD (RCA): Connect CD players or other audio sources.
3. Line Out Jack (RCA): Fun asopọ si miiran amplifier tabi ẹrọ gbigbasilẹ.
4. FM Antenna Jack: So eriali FM ti o wa ninu rẹ pọ fun gbigba redio.
5. Speaker Output Jacks: Connect passive speakers (4-16 Ohm impedance).
6. Input Okun Agbara: So okun agbara AC pọ.

5. Eto

5.1 Ibi

Gbe awọn amplifier on a flat, stable surface. Ensure there is sufficient space around the unit for proper ventilation to prevent overheating.

5.2 Asopọ agbara

Connect the power cable to the Power Cable Input on the rear panel of the amplifier, then plug the other end into a suitable AC power outlet (115V AC).

5.3 Asopọ Agbọrọsọ

Awọn MAMP1 amplifier supports two sets of passive speakers with an impedance of 4-16 Ohms. Use appropriate speaker wire to connect your speakers to the Speaker Output Jacks on the rear panel.

Image: Diagram illustrating how to connect speakers to the amplifier's binding posts.

1. Rotate and loosen the speaker knob on the binding post.
2. Insert the bare wire (remove approximately 10mm of insulation) into the hole. Ensure correct polarity (+ to + and - to -).
3. Tighten the knobs to secure the wires firmly.

5.4 Input Device Connection

Connect your audio sources (CD player, DVD player, tuner, etc.) to the corresponding RCA Audio Input jacks on the rear panel. For microphones, use the 6.35mm jacks on the front panel. For 3.5mm AUX devices, use the front panel AUX Input Jack.

6. Awọn ilana Iṣiṣẹ

6.1 Agbara Tan / Pa

Tẹ awọn Agbara Yipada lori iwaju nronu lati yi amplifier on or off. The LED display will illuminate when the unit is powered on.

6.2 Aṣayan titẹ sii

Lo awọn Bọtini Ipo on the front panel or the remote control to cycle through available input sources (Bluetooth, USB, SD, AUX, FM). Alternatively, use the Aṣayan Input knob on the front panel for RCA inputs (CD, AUX, DVD, MP3/W).

6.3 Iṣakoso iwọn didun

• Iwọn Titunto: Yiyi awọn Titiipa Iwọn didun Titunto to adjust the overall output level of the amplifier.
• Iwọn Gbohungbohun: Lo awọn Gbohungbohun Iwọn didun Gbohungbohun to control the volume of connected microphones independently.

6.4 Iṣakoso ohun orin

Adjust the audio characteristics using the Bọọlu Bass ati Tbleble Knob to suit your preference. The Iwontunwonsi Knob allows adjustment of the left and right channel output levels.

Image: Close-up of the Moukey MAMP1 showing the Bass and Treble adjustment knobs.

6.5 Echo Control

Yipada awọn Echo Knob to add or reduce the echo effect on the microphone inputs, suitable for karaoke applications.

6.6 Sisopọ Bluetooth

Lati so ẹrọ Bluetooth kan pọ:

1. Tẹ awọn BT Bọtini or cycle through modes until "BLUE" appears on the LED display.
2. Mu Bluetooth ṣiṣẹ lori foonuiyara, tabulẹti, tabi kọnputa rẹ.
3. Wa fun "Moukey MAMP1" in your device's Bluetooth settings and select it to pair.
4. Once paired, you can stream audio wirelessly. Playback will temporarily pause during phone calls to protect privacy.

Image: The Moukey MAMP1 amplifier displaying "BLUE" on its screen, indicating Bluetooth mode, with a smartphone showing pairing options.

6.7 Sisisẹsẹhin USB/SD

Insert a USB drive (max 32GB) or SD card (max 16GB) into the respective slot on the front panel. The amplifier will automatically switch to USB/SD mode and begin playback. Use the Iṣaaju, Ṣiṣẹ / Sinmi, Itele, ati Folder/Track awọn bọtini lati ṣakoso ṣiṣiṣẹsẹhin.

6.8 Redio FM

Ensure the FM antenna is connected to the rear panel. Select FM mode using the Bọtini Ipo. Lo awọn Iṣaaju ati Itele buttons to tune to radio stations. The LED display will show the current frequency.

7. Itọju

Lati ṣetọju iṣẹ ati irisi rẹ ampolutọpa:

• Ninu: Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or abrasive chemicals.
• Afẹfẹ: Rii daju pe awọn ṣiṣi atẹgun ko kuro ninu eruku ati idoti.
• Ibi ipamọ: Ti o ba tọju ẹyọ naa fun akoko ti o gbooro sii, ge asopọ kuro ni agbara ki o tọju rẹ si ibi ti o tutu, ti o gbẹ.

8. Laasigbotitusita

If you encounter issues with your Moukey MAMP1 amplifier, refer to the following table for common problems and solutions:

Ti iṣoro naa ba wa lẹhin igbiyanju awọn solusan wọnyi, jọwọ kan si atilẹyin alabara.

9. Awọn pato

Image: The Moukey MAMP1 amplifier with its dimensions labeled.

10. Atilẹyin ọja ati Support

This Moukey MAMP1 Agbara Amplifier wa pẹlu kan 1-odun atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn iṣelọpọ ati iṣẹ ṣiṣe labẹ lilo deede.

Atilẹyin ọja naa ko ni aabo:

• Damage caused by accident, abuse, misuse, flood, fire, or other natural causes.
• Damage caused by unauthorized modification or repair.
• Damage caused by improper installation or connection.
• Cosmetic damage, such as scratches, dents, and broken plastic on ports.

For warranty claims or technical support, please contact the retailer where you purchased the product or visit the official Moukey website for contact information. Please have your purchase receipt and product model number (MAMP1) ready when contacting support.