1. Alaye Aabo pataki
IKILO: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- This product is designed for installation on wood stud walls (16-inch spacing), solid concrete walls, or brick walls. MAA ṢE fi sori ẹrọ lori ogiri gbigbẹ nikan.
- Rí i dájú pé ìrísí ògiri náà lè gbé gbogbo ìwọ̀n àkójọpọ̀ àti tẹlifíṣọ̀n náà ró láìsí ewu.
- Maṣe kọja agbara iwuwo ti o pọju ti 100 lbs (45.3 kg).
- Verify the VESA pattern of your TV is within the supported range (Min VESA 200x100 mm, Max VESA 600x400 mm).
- Lo gbogbo ohun elo ti a pese. Maṣe lo awọn ẹya ti o bajẹ tabi sonu.
- Lo ohun èlò ìwádìí láti rí àwọn igi tí ó wà ní ọ̀nà tí ó tọ́.
- Wọ jia ailewu ti o yẹ nigba fifi sori ẹrọ.
- Pa awọn ọmọde ati awọn ohun ọsin kuro lakoko fifi sori ẹrọ.
- Lojoojumọ, ṣe àyẹ̀wò pé ibi tí a so mọ́ náà wà ní ààbò àti pé gbogbo àwọn ohun tí a so mọ́ ara wọn wà ní ìdúró.
2. Ọja Ipariview
The Mounting Dream MD2617-CA is a full motion TV wall mount designed for televisions between 42 and 84 inches, weighing up to 100 lbs. It offers extensive adjustability for optimal viewing awọn igun.
Image: The Mounting Dream MD2617-CA full motion TV wall mount, shown with its articulating arms and a small level tool.
Awọn ẹya pataki:
- Ibamu Agbaye: Supports most 42-84 inch TVs up to 100 lbs with VESA patterns from 200x100mm to 600x400mm.
- Full Motion Flexibility:
- Tẹ: +5° to -15° for glare reduction.
- Swivel: Up to ±45° for optimal viewlati orisirisi awọn ipo.
- Itẹsiwaju: Extends up to 16.6 inches from the wall and retracts to 2.5 inches.
- Ipele lẹhin fifi sori ẹrọ: ±4° adjustment for perfect TV leveling after mounting.
- Ikole ti o lagbara: Made from cold-formed steel for safety and reliability.
- Iṣakoso okun USB ti a ṣepọ: Clips on the arms help organize cables.
- Allen Key Storage: Convenient storage for the Allen key on the mount.
- Safety Clips: Mechanisms to securely lock the TV in place.
Aworan: Alaye view of the mount's features, including Allen key storage, TV locking clips, rubber mat for cushioning, and cable management clips.
3. Awọn pato
| Nọmba awoṣe | MD2617-CA |
| Ibaramu Iwọn TV | 42 - 84 inches |
| Agbara iwuwo | 100 lbs (45.3 kg) |
| VESA ibamu | Min: 200x100 mm, Max: 600x400 mm |
| Titẹ Igun | +5° / -15° |
| Igun Swivel | Títí dé ±45° (gẹ́gẹ́ bí ìwọ̀n tẹlifíṣọ̀n) |
| Itẹsiwaju lati Wall | 2.5 inches (ti a fà sẹ́yìn) sí 16.6 inches (tí a fẹ̀ sí i) |
| Lehin fifi sori Ipele | ±4° |
| Wall Awo Mefa | (Refer to specific diagram in packaging for exact dimensions, typically covers 16-inch stud spacing) |
| Ohun elo | Cold-formed steel |
| Àwọ̀ | Dudu |
4. Eto ati fifi sori Itọsọna
Before you begin, ensure you have all necessary tools and hardware. A stud finder, drill, level, and measuring tape are typically required. All hardware is provided in pre-labeled bags.
4.1 Compatible Wall Types:
This mount is designed for:
- Wood Stud Walls: Suitable for 8", 12", or 16" wood stud spacing. (Note: Not for studs wider than 16").
- Àwọn Ògiri Kọnkíríìtì Líle
- Àwọn Ògiri Bíríkì
IMPORTANT: DO NOT install this TV mounting bracket on drywall alone.
Image: Illustrations showing the mount installed on wood stud, concrete, and brick walls, with a warning against drywall-only installation.
4.2 Fifi sori ẹrọ ni igbese-nipasẹ-igbesẹ:
Follow these general steps. Refer to the detailed paper template and instructions included in your package for precise measurements and hardware selection.
- Attach Brackets to TV Back:
Select the appropriate screws, washers, and spacers for your TV's VESA mounting holes. Secure the two vertical TV brackets to the back of your television. Ensure they are centered and securely fastened.
Image: A three-step installation guide showing attaching brackets to the TV, installing the wall plate, and hanging the TV.
- Fi sori ẹrọ Awo Odi:
Determine the desired height for your TV. Use a stud finder to locate the center of your wood studs. Mark the drill holes using the provided paper template. For concrete/brick walls, mark holes directly. Drill pilot holes as specified in the manual. Secure the wall plate to the wall using the appropriate lag bolts and washers. Use the included level to ensure the wall plate is perfectly horizontal.
- Hang TV onto Wall Plate:
Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated. Engage the safety locking clips to prevent accidental dislodgement. Perform any post-installation leveling adjustments as needed.
Concrete Anchors: If installing on concrete, concrete anchors (Anchor Size: φ10x50mm) can be provided upon request from Mounting Dream customer support.
5. Awọn ilana Iṣiṣẹ
The MD2617-CA mount offers various adjustments to achieve your preferred viewigun igun.
5.1 Adjusting Tilt:
To adjust the vertical tilt of your TV (from +5° up to -15° down), loosen the tilt adjustment knobs on the TV brackets, position the TV to the desired angle, and then securely tighten the knobs. This helps reduce glare from lights or windows.
Image: A TV mounted on the wall, demonstrating the tilt range from +5 degrees up to -15 degrees down.
5.2 Adjusting Swivel and Extension:
The articulating arms allow you to swivel the TV left or right by up to ±45° and extend it up to 16.6 inches from the wall or retract it to 2.5 inches. Gently push or pull the TV to the desired position. The arms are designed for smooth movement.
Image: A TV mounted on the wall, demonstrating the swivel range of up to ±45 degrees.
Image: A diagram illustrating the mount's extension capability, extending 16.6 inches and retracting to 2.5 inches from the wall.
5.3 Post-Installation Leveling:
If your TV appears slightly unlevel after installation, you can make a fine adjustment of ±4° without removing the TV from the wall. Consult your specific manual for the exact mechanism, which typically involves loosening specific screws on the TV brackets, adjusting, and re-tightening.
Image: A TV mounted on the wall, showing the ability to level the screen by ±4 degrees after initial installation.
6. Itọju
Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti oke ogiri TV rẹ.
- Ayewo Igbakọọkan: Every few months, visually inspect the mount and all connection points for any signs of wear, damage, or loosening.
- Mu Awọn ohun elo Mu: Gently re-tighten any screws or bolts that may have loosened over time. Do not overtighten.
- Ninu: Mu ese kuro pẹlu asọ ti o tutu, ti o gbẹ lati yọ eruku kuro. Yago fun lilo abrasive ose tabi epo.
- Lubrication: The articulating arms are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with the TV or wall.
7. Laasigbotitusita
If you encounter issues with your Mounting Dream TV wall mount, refer to the following common solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| TV kii ṣe ipele lẹhin fifi sori ẹrọ. | Initial installation slightly off; post-installation leveling not adjusted. | Use the ±4° post-installation leveling feature. Loosen the specific leveling screws, adjust the TV, and re-tighten. |
| Oke kan lara alaimuṣinṣin tabi riru. | Wall plate not securely fastened; fasteners have loosened over time. | Immediately remove the TV. Check all lag bolts securing the wall plate to the wall. Ensure they are fully tightened into studs or concrete. If necessary, consult a professional. |
| TV ko yẹ sori pẹpẹ naa. | Àwòrán VESA tàbí ìwọ̀n/ìwúwo TV tí kò tọ́. | Verify your TV's VESA pattern, size, and weight against the mount's specifications (Min VESA 200x100mm, Max VESA 600x400mm, 42-84 inches, up to 100 lbs). |
| Difficulty moving articulating arms. | Dust or lack of lubrication at pivot points. | Clean pivot points and apply a small amount of silicone-based lubricant if needed. Ensure no cables are obstructing movement. |
8. Atilẹyin ọja ati Support
Mounting Dream products are designed for durability and reliability. This product comes with a warranty (refer to your purchase documentation for specific terms and duration).
For any pre-purchase questions, installation assistance, or support, the Mounting Dream customer service team is available 7 days a week.
- Iṣẹ onibara: Contact information can be found on the official Mounting Dream webaaye tabi apoti ọja rẹ.
- Awọn orisun Ayelujara: Ṣabẹwo si Mounting Dream Store on Amazon fun afikun ọja alaye ati support.
