Streamlight TLR-8 X Tactical Weapon Light User Manual

Ọrọ Iṣaaju

The Streamlight 69414 TLR-8 X is a compact and durable tactical weapon light with an integrated red aiming laser, designed for enhanced performance in various environments. It provides 500 lumens of LED brightness and a 5,000 candela peak beam intensity, ensuring superior visibility and precise targeting. This manual provides detailed instructions for the safe and effective use, installation, and maintenance of your TLR-8 X.

Alaye Aabo

IKILO:

Ọja yii ni awọn kemikali ti a mọ si Ipinle California lati fa akàn ati awọn abawọn ibimọ tabi ipalara ibisi miiran.

Always ensure the firearm is unloaded and safe before installing, removing, or performing any maintenance on the TLR-8 X. Keep fingers clear of the muzzle.

The laser is rated Class 3R, 640-660nm with an output of <5mW. Avoid direct eye exposure to the laser beam.

Package Awọn akoonu

• TLR-8 X Flashlight with Integrated Red Aiming Laser
• 1x CR123A Battery
• High and Low Switches (pre-installed or included as options)
• Mounting Kit (includes various keys: UNIV-1, UNIV-2, UNIV-3, 1913-1, 1913-2, 1913-3, 1913-4, and any 1913 key)
• Key Box and Tool
• Itọsọna olumulo (Itọsọna yii)

Ṣeto

1. Fifi sori batiri

The TLR-8 X uses one CR123A battery. To install or replace the battery:

1. Rí i dájú pé ìbọn náà kò jáde kúrò nínú rẹ̀, ó sì wà ní ààbò.
2. Unscrew the face cap of the light by rotating it counter-clockwise.
3. Insert the CR123A battery with the positive (+) end facing towards the light head.
4. Screw the face cap back on clockwise until it is finger-tight.

Image: The TLR-8 X with its face cap unscrewed, showing the battery compartment and a CR123A battery ready for insertion.

2. Mounting to Firearm

The TLR-8 X features a robust rail clamp system for secure attachment and detachment without tools. Verify compatibility and fitment with your specific handgun model before purchase and installation.

1. Rí i dájú pé ìbọn náà kò jáde kúrò nínú rẹ̀, ó sì wà ní ààbò.
2. Select the appropriate key from the mounting kit that matches your firearm's rail type (e.g., UNIV-1 for most Glock models, 1913-1 for Sig Sauer 320 Compact).
3. Loosen awọn iṣinipopada clamp screw on the TLR-8 X.
4. Align the TLR-8 X with the firearm's accessory rail and slide it into position.
5. Mu iṣinipopada clamp screw until the light is securely fastened to the rail. Do not overtighten.

Image: A Streamlight TLR-8 X shown from the front-right angle, illustrating its compact design and rail clamp system for attachment to a firearm.

Aworan: A ẹgbẹ view of the Streamlight TLR-8 X, highlighting its profile and the integrated laser emitter.

3. Rear Switch Options

The TLR-8 X comes with interchangeable rear paddle switches (high and low options) to suit user preference and firearm ergonomics. The default switches are typically the "high" profile.

1. To change switches, ensure the unit is off and detached from the firearm.
2. Carefully remove the existing paddle switches.
3. Install the desired high or low profile switches by aligning them with the slots and pressing firmly until they click into place.

Image: A comparison showing the "High Switch" and "Low Switch" options for the TLR-8 X, illustrating the difference in their paddle profiles.

Awọn ilana Iṣiṣẹ

1. Agbara Tan / Pa ati Aṣayan Ipo

The TLR-8 X offers three primary modes: LED Light Only, LED Light & Laser, and Laser Only. Switching between modes is intuitive using the ambidextrous rear paddle switches.

• Ìmúṣiṣẹ́ fún ìgbà díẹ̀: Tẹ ki o si di eyikeyi paddle switch mu. Tu silẹ lati pa.
• Nigbagbogbo Lori: Press and release either paddle switch quickly. Press again to turn off.
• Awọn ọna Yipada: With the unit on, press and hold one paddle switch, then tap the other paddle switch to cycle through the modes (Light Only → Light & Laser → Laser Only).

Image: The Streamlight TLR-8 X shown with its red aiming laser activated, projecting a visible red dot.

2. Strobe Mode

The TLR-8 X features a user-enabled strobe mode for tactical situations.

• To activate strobe: From the "Constant On" mode, quickly double-tap either paddle switch.
• To deactivate strobe: Press either paddle switch once.

3. Safe Off Feature

The Safe Off feature prevents unintentional activation, conserving battery life and ensuring readiness. To engage Safe Off, rotate the face cap approximately 1/4 turn counter-clockwise until the light no longer activates. To disengage, rotate clockwise until it is finger-tight.

4. Laser Zeroing (Sighting In)

To ensure accurate aiming, the integrated red laser needs to be zeroed to your firearm. This process typically involves adjusting the laser's point of impact to match your firearm's point of aim.

1. Rí i dájú pé ìbọn náà kò jáde kúrò nínú rẹ̀, ó sì wà ní ààbò.
2. Mount the TLR-8 X securely to your firearm.
3. Using the small hex wrench provided in the mounting kit, locate the windage (horizontal) and elevation (vertical) adjustment screws on the side and bottom of the unit.
4. Make small adjustments to the screws. Turning the screw clockwise typically moves the laser in one direction, and counter-clockwise in the opposite. Test adjustments at a safe range.
5. Fire a few rounds at a target to determine the point of impact relative to the laser dot. Adjust the laser until the point of impact aligns with the laser dot at your desired zeroing distance.
6. Akiyesi: Be careful not to strip the adjustment screws. Use a properly sized hex wrench.

Aworan: A ru view of the Streamlight TLR-8 X, indicating the location of the windage and elevation adjustment screws for the laser.

Itoju

• Ninu: Lo asọ, damp cloth to clean the exterior of the light. For the lens, use a lens cleaning cloth and solution designed for optics. Avoid abrasive materials.
• Rirọpo Batiri: Replace the CR123A battery when the light output diminishes or the laser becomes dim. Always use high-quality batteries.
• O-Oruka: Periodically inspect the O-rings for wear and tear. Lubricate with silicone grease if necessary to maintain water resistance.
• Ibi ipamọ: When storing the TLR-8 X for extended periods, remove the battery to prevent leakage and damage. Engage the Safe Off feature.

Laasigbotitusita

Awọn pato

• Awoṣe: 69414
• Ijade Imọlẹ: 500 Lumens
• Ikikun Ti o ga julọ: 5000 Candela
• Ijinna tan ina: 141 Mita
• Runtime (Light Only): wakati meji 1.5
• Iru lesa: Red Aiming Laser (Class 3R, 640-660nm, <5mW output)
• Orisun Agbara: 1x CR123A Battery (included)
• Ohun elo: Anodized Machined Aluminum
• Omi Resistance: IPX4 (Atako omi)
• Awọn iwọn: 2.58"D x 1.18"W x 1.5"H
• Ìwúwo: 2.56 iwon (0.16 iwon)
• Àwọ̀: Dudu
• Iṣagbesori: Rail Clamp System (compatible with UNIV-1, UNIV-2, UNIV-3, 1913-1, 1913-2, 1913-3, 1913-4, and any 1913 key)

Atilẹyin ọja ati Support

The Streamlight TLR-8 X is backed by a Atilẹyin ọja to lopin. For warranty claims, technical support, or service, please contact Streamlight customer service directly. Refer to the official Streamlight webAaye fun alaye olubasọrọ tuntun ati awọn alaye atilẹyin ọja.

O tun le ri afikun oro ati support lori awọn Ile itaja Streamlight lori Amazon.