VIVOTEK FD9360-HF2

VIVOTEK FD9360-HF2 2MP IR Outdoor Fixed Dome Network Camera User Manual

Model: FD9360-HF2 | Brand: VIVOTEK

1. Ọja Ipariview

The VIVOTEK FD9360-H is a high-performance H.265 outdoor dome network camera designed for robust surveillance applications. It features a 2-Megapixel sensor, delivering clear resolution of 1920x1080 at 30 frames per second. Equipped with VIVOTEK's SNV (Supreme Night Visibility) and WDR Pro (Wide Dynamic Range Pro) technologies, this camera excels in capturing high-quality imagery across various lighting conditions, including high contrast and low light environments. The FD9360-H utilizes a 2.8mm lens and integrates IR illuminators for enhanced night vision capabilities, making it suitable for continuous outdoor monitoring.

VIVOTEK FD9360-HF2 2MP IR Outdoor Fixed Dome Network Camera

Figure 1: VIVOTEK FD9360-HF2 2MP IR Outdoor Fixed Dome Network Camera. This image shows the white dome-shaped camera with the VIVOTEK logo on top. The clear dome cover reveals the camera lens and infrared LEDs inside. A white cable extends from the back of the camera, ending in an RJ45 connector.

2. Package Awọn akoonu

Please verify that all items listed below are included in your package. If any items are missing or damaged, contact your vendor immediately.

  • VIVOTEK FD9360-HF2 Network Camera
  • Iṣagbesori Àdàkọ
  • Iṣagbesori skru ati odi ìdákọró
  • Ohun elo Asopọ Omi ti ko ni omi
  • Awọn ọna fifi sori Itọsọna
  • Software CD (or link to download)

3. Eto ati fifi sori

Proper installation is crucial for optimal performance and longevity of your camera. Ensure you have the necessary tools and safety equipment before beginning.

3.1 Aye Yiyan

Yan ipo fifi sori ẹrọ ti o pese aaye ti o fẹ view, is within range of your network infrastructure, and offers protection from direct impact or vandalism. The camera is rated IP65 for outdoor use.

3.2 Iṣagbesori Kamẹra

  1. Ṣetan Ilẹ: Use the provided mounting template to mark drill holes on the ceiling or wall.
  2. Awọn iho iho: Lilu awọn ihò awaoko fun awọn skru iṣagbesori ati fi awọn oran odi ti o ba jẹ dandan.
  3. Ṣe aabo ipilẹ: Attach the camera's mounting base to the surface using the screws. Ensure it is firmly secured.
  4. Iṣakoso USB: Route the network cable through the designated opening in the mounting base.

3.3 Nẹ́tíwọ́ọ̀kì àti Agbára Ìsopọ̀

  • Asopọmọra Ethernet: Connect an RJ45 Ethernet cable to the camera's network port. For outdoor installations, use the waterproof connector kit to ensure a sealed connection.
  • Agbara lori Ethernet (PoE): The FD9360-HF2 supports PoE, simplifying installation by delivering both power and data over a single Ethernet cable. Connect the Ethernet cable to a PoE-enabled switch or injector.
  • Alternative Power (if applicable): If PoE is not used, connect a 12V DC power adapter (not included) to the camera's power input.

3.4 Iṣeto ni ibẹrẹ

After physical installation, connect to the camera via your network. Refer to the Quick Installation Guide or the full user manual (available on the VIVOTEK website) for detailed instructions on IP address discovery and initial setup using VIVOTEK's utility software.

4. Ṣiṣẹ kamẹra

Once configured, the camera can be accessed and managed through a web browser or compatible VMS (Video Management Software).

4.1 Iwọle si Web Ni wiwo

  1. Ṣii a web ẹrọ aṣawakiri (fun apẹẹrẹ, Chrome, Firefox).
  2. Enter the camera's IP address in the address bar and press Enter.
  3. Log in using the default credentials (refer to your Quick Installation Guide for default username and password, and change them immediately for security).

4.2 Key Awọn ẹya ara ẹrọ ati Eto

  • Gbe View: Monitor real-time video feed.
  • Eto Gbigbasilẹ: Configure continuous, motion-triggered, or scheduled recording to a network video recorder (NVR) or local storage (if supported).
  • Eto Aworan: Adjust brightness, contrast, saturation, sharpness, and enable/disable WDR Pro and SNV for optimal image quality in varying light conditions.
  • Awọn itanna IR: The built-in IR illuminators automatically activate in low light to provide clear black and white images in complete darkness.
  • Iwari išipopada: Set up motion detection zones and sensitivity for event-triggered recording and alerts.
  • Eto nẹtiwọki: Configure IP address, DNS, and other network parameters.

5. Itọju

Regular maintenance ensures the longevity and optimal performance of your VIVOTEK camera.

  • Ninu: Periodically clean the camera's dome cover with a soft, damp cloth. Avoid abrasive cleaners that could scratch the surface. Ensure the lens is free of dust and smudges.
  • Awọn imudojuiwọn famuwia: Check the VIVOTEK official website regularly for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided by VIVOTEK for firmware upgrade procedures.
  • Ayẹwo USB: Periodically inspect all cables for signs of wear, damage, or corrosion, especially for outdoor installations.
  • Ṣayẹwo Ayika: Ensure the camera's environment remains within its specified operating temperature and humidity ranges.

6. Laasigbotitusita

This section addresses common issues you might encounter with your VIVOTEK FD9360-HF2 camera.

IsoroOwun to le FaOjutu
No Power/Camera Not Turning OnNo PoE connection; faulty power adapter; damaged cable.Verify PoE switch/injector is active. Check power adapter and cable connections. Test with a known good power source.
Ko si Fidio kikọ siiNetwork connectivity issue; incorrect IP address; firewall blocking.Check network cable. Ping camera's IP address. Ensure camera and viewing device are on the same network segment. Disable temporary firewalls.
Poor Image Quality (Blurry/Dark)Dirty lens/dome; improper focus (if adjustable); insufficient lighting; incorrect image settings.Clean the dome and lens. Adjust image settings (brightness, contrast, WDR Pro, SNV). Ensure adequate lighting or proper IR operation.
Ko le Wiwọle Web Ni wiwoIncorrect IP address; network conflict; browser compatibility.Confirm camera's IP address. Check for IP conflicts on your network. Try a different web browser. Clear browser cache.

For more complex issues, refer to the full user manual or contact VIVOTEK technical support.

7. Awọn pato

Key technical specifications for the VIVOTEK FD9360-HF2 camera:

  • Awoṣe: FD9360-HF2
  • Ìpinnu Fídíò Tó Múnádóko: 2 MP (1920x1080)
  • Iwọn fireemu: 30 fps
  • Lẹnsi: 2.8mm (Ti a ti mu duro)
  • Imọ-ẹrọ Asopọmọra: Alailowaya (Wi-Fi) ati Alailowaya (RJ45)
  • Orisun Agbara: AC/DC, supports Power over Ethernet (PoE)
  • Lilo inu ile/ita gbangba: Ita gbangba
  • Iwọn Idaabobo Kariaye: IP65
  • Imọ-ẹrọ Imọlẹ Kekere: Day/Night with IR Illuminators, SNV, WDR Pro
  • Awọn iwọn (L x W x H): 4.61 x 4.61 x 3.53 inches
  • Ìwọ̀n Nkan: 0.01 iwon
  • Wattage: 9.5 watt
  • UPC: 745560774694

8. Atilẹyin ọja ati Support

VIVOTEK products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK webojula.

For technical assistance, product inquiries, or support, please contact VIVOTEK customer service or visit their support portal:

  • VIVOTEK Official Webojula: www.vivotek.com
  • Portal Atilẹyin: Tọkasi awọn webAaye fun awọn olubasọrọ ati awọn orisun atilẹyin agbegbe.

© 2023 VIVOTEK Inc. All rights reserved. Information is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.