Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light

1. Ifihan

Thank you for choosing the Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light. This innovative product combines efficient ventilation with a high-fidelity Bluetooth speaker and integrated LED lighting, designed to enhance comfort and air quality in your bathroom. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your unit.

2. Alaye Aabo

Jọ̀wọ́ ka gbogbo ìtọ́ni kí o sì lóye wọn kí o tó bẹ̀rẹ̀ sí í fi sori ẹ̀rọ tàbí iṣẹ́. Àìtẹ̀lé àwọn ìtọ́ni wọ̀nyí lè yọrí sí ìkọlù iná mànàmáná, iná, ìbàjẹ́ dúkìá, tàbí ìpalára ara ẹni.

• Máa yọ agbára kúrò ní ibi iṣẹ́ kí o tó fi wáyà tàbí ṣe àtúnṣe sí ẹ̀rọ náà.
• All wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
• A ṣe ẹ̀rọ yìí fún lílo afẹ́fẹ́ gbogbogbòò nìkan. Má ṣe lò ó láti mú kí àwọn ohun èlò tó léwu tàbí tó ń bú gbàù àti èéfín jáde.
• To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
• This product is UL listed for use over a bathtub or shower when connected to a GFCI-protected branch circuit (ceiling mount only).

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• Ilé Fẹ́ẹ́fùn Afẹ́fẹ́
• Grille Assembly with Integrated LED Light and Bluetooth Speaker
• Hardware fifi sori ẹrọ
• Itọsọna olumulo

4. Awọn pato

5. fifi sori

This fan is designed for easy installation, fitting 2"x8" ceiling construction. A tapered, polymeric 4-inch round duct fitting ensures a positive duct connection without metallic clatter.

Awọn igbesẹ fifi sori ẹrọ gbogbogbo:

1. Ṣetan Agbegbe: Ensure power is disconnected at the circuit breaker. Clear the installation area in the ceiling.
2. Fi Ibugbe naa sori ẹrọ: Secure the fan housing to the ceiling joists. The housing dimensions are approximately 8.25" x 8" x 5.75".
3. So Pọ̀ǹpútà pọ̀: Attach the 4-inch round duct to the fan's duct connector. Ensure a secure and airtight connection.
4. Wire the Unit: Connect the electrical wiring according to local electrical codes. The unit requires 120V power.
5. Install Grille Assembly: Once the housing is secured and wired, attach the grille assembly, ensuring it snaps firmly into place.

6. Awọn ilana Iṣiṣẹ

Fan and Light Operation:

The fan and LED light are typically controlled via a standard wall switch. Consult your electrician for specific wiring configurations if you desire separate control for the fan and light functions.

Iṣẹ Agbọrọsọ Bluetooth:

The integrated Sensonic Bluetooth speaker allows you to stream audio wirelessly from any Bluetooth-enabled device.

Nsopọ Ẹrọ Rẹ pọ:

1. Ensure the fan unit has power. The Bluetooth speaker will automatically enter pairing mode when powered on.
2. Lórí fóònù alágbèéká rẹ tàbí ẹ̀rọ mìíràn tí ó ní Bluetooth, lọ sí àwọn ètò Bluetooth.
3. Look for a device named "FAN SPEAKER" (or similar, refer to your device's specific instructions if different).
4. Select "FAN SPEAKER" to pair. Once paired, you will hear an audible confirmation tone from the speaker.
5. You can now stream audio from your device to the fan's speaker.

The speaker does not require a specific application for functionality.

7. Itọju

Regular cleaning and maintenance will ensure the long-term performance and efficiency of your ventilation fan.

Fifọ Grille kuro:

1. Disconnect power to the fan at the service panel.
2. Gently pull down the grille assembly from the ceiling. It is typically held by spring clips.
3. Pa grille nu pẹlu ipolowoamp cloth using a mild, non-abrasive cleaning solution. Do not spray water directly onto the grille or electrical components.
4. Allow the grille to dry completely before reattaching.

Cleaning the Fan Motor and Housing:

Periodically, the fan motor and housing may accumulate dust and debris. This should be cleaned by a qualified service person.

• Disconnect power to the fan at the service panel.
• Remove the grille assembly.
• Carefully vacuum or wipe away any dust from the fan blades and interior of the housing. Avoid touching electrical components.
• Reattach the grille assembly and restore power.

8. Laasigbotitusita

If your fan is not operating correctly, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, please contact Broan-NuTone Customer Support.

9. atilẹyin ọja Information

The Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light is backed by a Mẹta-odun Limited atilẹyin ọja. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official warranty document included with your product or visit the Broan-NuTone webojula.

10. Alaye atilẹyin

For technical assistance, replacement parts, or further inquiries, please contact Broan-NuTone Customer Support:

• Webojula: Ṣèbẹ̀wò sí Broan-NuTone tí ó jẹ́ ti aláṣẹ webojú òpó wẹ́ẹ̀bù fún àwọn ìbéèrè tó máa ń wáyé nígbà gbogbo, ìforúkọsílẹ̀ ọjà, àti àwọn ohun èlò míìrán.
• Foonu: Tọkasi alaye olubasọrọ ti a pese lori apoti ọja tabi osise naa webojula fun onibara iṣẹ awọn nọmba foonu.

Please have your model number (SPK80L) and purchase date available when contacting support.