Ìwé Ìtọ́ni Ààbò AEGIS 1.7 Onígun 1 ẹsẹ̀ onígun 1

Ọrọ Iṣaaju

Thank you for choosing the AEGIS 1.7 Cubic Feet Digital Safe. This manual provides essential information for the proper setup, operation, and maintenance of your new security safe. Please read these instructions carefully before use to ensure optimal performance and security.

This electronic security cabinet is designed to protect your valuable possessions, including important documents, jewelry, handguns, and cards. Its robust construction and advanced locking mechanisms offer peace of mind for home, office, or dorm use.

Key Awọn ẹya ara ẹrọ

• Large Capacity & Removable Shelf: Exterior Dimensions: 13"D*13.8"W*16.5"H, Interior Dimensions: 10.7"D*13.6"W*16.3"H. 1.7 cubic feet capacity with a removable shelf for flexible storage.
• Strong & Secure Construction: Made of reinforced solid steel with two 18mm diameter active locking bolts, a pry-resistant steel door, and heavy-duty pry-resistant hinges.
• Ipese Agbara Meji: Operates with 4 x 1.5V AA Alkaline batteries (not included) or via the included USB-C cable for alternative power.
• Wall and Floor Mountable: Features pre-drilled holes on the bottom and back for secure installation.
• Bọtini oni-nọmba: Easy-to-use electronic keypad for quick setup and operation, protecting valuables with a carpeted floor mat.

Ṣeto

1. Unboxing ati Ibẹrẹ Ayẹwo

Carefully remove the safe from its packaging. Inspect the safe for any signs of damage. Ensure all components, including the emergency keys and instruction manual, are present.

2. Fifi sori batiri

Locate the battery compartment inside the safe door. Insert 4 new 1.5V AA Alkaline batteries, ensuring correct polarity. Close the battery cover securely.

Image: Interior of the safe showing the battery compartment.

Alternatively, the safe can be powered using a USB-C cable (not included) connected to the external power port on the keypad, especially useful if batteries are depleted or forgotten.

3. Ṣíṣeto Kóòdù Ti ara ẹni Rẹ

With the safe door open, press the red reset button located on the inside of the door, near the hinge. The keypad will beep, and the green light will illuminate. Enter your desired 3 to 8 digit code, then press the '#' or 'E' button to confirm. Test your new code with the door open to ensure it works correctly before closing the safe.

Image: Digital keypad for setting and entering codes.

Awọn ilana Iṣiṣẹ

1. Nsii Ailewu pẹlu Digital Code

Enter your personal 3 to 8 digit code on the digital keypad. If the code is correct, the green light will illuminate. Turn the knob clockwise to open the safe door.

2. Nsii Ailewu pẹlu bọtini pajawiri

In case of forgotten password or dead batteries, the safe can be opened using the emergency key. Remove the cover plate on the keypad to reveal the keyhole. Insert the emergency key and turn it counter-clockwise while simultaneously turning the knob clockwise to open the safe.

Image: Close-up showing the emergency keyhole and internal locking mechanism.

3. Ọrọigbaniwọle Tun

To reset the password, open the safe door. Press the red reset button inside the door. Enter your new 3-8 digit code and confirm with '#' or 'E'.

4. Ikilo Batiri Kekere

When the batteries are low, the yellow light on the keypad will illuminate, indicating that the batteries need to be replaced soon. Replace all 4 AA batteries promptly to ensure continuous operation.

Video: Demonstration of the AEGIS Digital Security Safe Box for Home, showing key features and operation.

Iṣagbesori Awọn ilana

The AEGIS safe features two pre-drilled holes on both the bottom and back for secure mounting to a wall or floor. This enhances security by preventing unauthorized removal of the safe.

Steps for Mounting:

1. Choose a suitable location for mounting, ensuring it is a solid surface (e.g., concrete wall, wooden stud, or sturdy floor).
2. Ṣe àmì sí àwọn ibi tí a ti ń lu ihò náà láti inú ihò tí a ti gbẹ́ tẹ́lẹ̀ nínú àpótí ìpamọ́ náà.
3. Drill pilot holes into the wall or floor using an appropriate drill bit size for your mounting hardware (not included).
4. Align the safe with the drilled holes and secure it using suitable bolts or screws. Ensure the safe is firmly attached and does not wobble.

Image: The AEGIS safe showing the embedded knob handle and illustrating its placement in a home environment.

Itoju

• Ninu: Mu ese ita ti ailewu pẹlu asọ, damp asọ. Yago fun abrasive ose tabi olomi ti o le ba awọn ipari.
• Rirọpo Batiri: Replace batteries annually or when the low battery indicator illuminates to ensure reliable operation.
• Ibi ipamọ bọtini: Store emergency keys in a secure location away from the safe and out of reach of unauthorized individuals.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

AEGIS products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please contact AEGIS customer service. Keep your purchase receipt as proof of purchase for warranty purposes.

For further assistance, please visit the official AEGIS store: AEGIS Store on Amazon.