Moukey Ultra-Low Noise 8-Channel Line Stereo Audio Mixer

1. Ifihan

O ṣeun fun riraasing the Moukey MAMX3 Ultra-Low Noise 8-Channel Line Stereo Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage.

Figure 1: Moukey MAMX3 8-Channel Line Stereo Audio Mixer

2. Awọn ilana aabo

• Do not expose this device to rain or moisture to avoid fire or electric shock.
• Maṣe ṣii casing. Ko si awọn ẹya ti olumulo-iṣẹ ninu. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
• Rii daju pe ipese agbara voltage ibaamu awọn ibeere pato lori kuro.
• Yago fun gbigbe ẹrọ naa si nitosi awọn orisun ooru tabi ni imọlẹ orun taara.
• Clean only with a dry cloth. Do not use liquid cleaners.
• Jeki kuro ni arọwọto awọn ọmọde.

3. Awọn ẹya Ọja

• 8-Iwọle ikanni: Mix up to eight independent audio signals.
• Sítéróónù/Mono Yíyípadà: Flexible input/output configuration for both stereo and mono signals. For stereo, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables. For mono, eight mono signal inputs are mixed into one mono signal output.
• Iṣakoso iwọn didun olominira: Each input channel features a dedicated volume knob for precise level adjustment.
• Iṣẹ́ Ariwo Kekere Pupọ: Designed for minimal distortion and excellent audio performance.
• Iwapọ ati Gbigbe: Space-saving design for easy transport and setup.
• Ipese Agbara DC 5V: Powered via DC 5V, offering versatile power options (e.g., USB port, power bank, 5V phone plug).
• Ikole ti o tọ: Robust metal casing ensures longevity.

4. Ọja Ipariview

The Moukey MAMX3 mixer features a straightforward layout for easy operation. Below are diagrams illustrating the controls and input/output ports.

olusin 2: Top Panel idari

• Input 1-8 Level Knobs: Adjust the volume for each individual input channel.
• Mono/Stereo Switches: Select between mono or stereo operation for input channels.
• Channel Output Mix L-R Switch: Combines channels 1-4 and 5-8 into a single stereo output.
• Output A/B Level Knobs: Adjust the overall output volume for Output A and Output B.

Figure 3: Rear Panel Input/Output Ports

• INPUT 1-8 (1/4" TRS/TS): Connect your audio sources here.
• OUTPUT A (1/4" TRS): Main audio output.
• OUTPUT B A/B L-R (1/4" TRS): Secondary audio output, can be configured for A/B or Left/Right stereo.
• DC 5V (USB-C): Ibudo titẹ agbara.
• Pow Indicator: Ṣe itanna nigbati ẹrọ naa ba wa ni titan.

olusin 4: Awọn iwọn Ọja

5. Eto

5.1 Asopọ agbara

1. Locate the DC 5V USB-C port on the rear panel of the mixer.
2. Connect the provided USB cable to the mixer and to a compatible 5V power source (e.g., computer USB port, power bank, or 5V phone charger).
3. The 'Pow' indicator light will illuminate, indicating the mixer is receiving power.

Àwòrán 5: Àwọn Àṣàyàn Ipèsè Agbára

5.2 Audio Input Awọn isopọ

1. Connect your audio sources (e.g., microphones, guitars, bass, keyboards, media players) to the INPUT 1-8 jacks using 1/4-inch TRS or TS cables.
2. For stereo input, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables and ensure the corresponding Mono/Stereo switch is set to 'Stereo'.
3. For mono input, use 1/4-inch TS cables and ensure the corresponding Mono/Stereo switch is set to 'Mono'.

5.3 Audio wu Awọn isopọ

1. Connect the OUTPUT A and/or OUTPUT B jacks to your amplifier, powered speakers, or recording device using 1/4-inch TRS cables.
2. Ensure all connections are secure before proceeding to operation.

6. Awọn ilana Iṣiṣẹ

6.1 Titan / Pa a

The mixer powers on automatically when connected to a 5V power source. Disconnect the power cable to turn off the unit.

6.2 Adjusting Channel Levels

1. Turn all LEVEL knobs (1-8) and OUTPUT A/B knobs to their minimum position before playing any audio.
2. Bẹ̀rẹ̀ sí í gbọ́ ohùn láti orísun tí o so pọ̀ mọ́.
3. Slowly increase the LEVEL knob for the corresponding input channel until the desired volume is achieved.
4. Adjust the OUTPUT A/B knobs to control the overall master volume.

6.3 Stereo/Mono Mode Selection

Use the Mono/Stereo switches above each channel to select the desired mode. For stereo operation, ensure you are using TRS cables for both input and output and the switch is set to 'Stereo'. For mono operation, set the switch to 'Mono'.

6.4 Mixing Multiple Sources

The MAMX3 allows you to mix up to eight line-level signals. Adjust each channel's LEVEL knob independently to create your desired mix. The Channel Output Mix L-R switch can combine channels 1-4 and 5-8 into a single stereo output for simplified routing.

Figure 6: Mixer in a typical setup

7. Itọju

• Ninu: Use a soft, dry cloth to clean the exterior of the mixer. Do not use abrasive cleaners, solvents, or waxes.
• Ibi ipamọ: When not in use for extended periods, store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
• Itọju USB: Always handle cables by the connector, not the wire. Avoid bending or crimping cables excessively.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

This Moukey MAMX3 mixer comes with a 12-osu atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn iṣelọpọ ati iṣẹ ṣiṣe labẹ lilo deede.

Atilẹyin ọja naa ko ni aabo ibajẹ ti o ṣẹlẹ nipasẹ:

• Aibojumu fifi sori tabi isẹ.
• Awọn atunṣe tabi awọn atunṣe laigba aṣẹ.
• Accidents, misuse, or neglect.
• Natural disasters or power surges.

For technical support, warranty claims, or any questions regarding your Moukey MAMX3 mixer, please contact our customer service team through the retailer where you purchased the product or visit the official Moukey webojula fun alaye olubasọrọ.

Akiyesi: No official product video URL (m3u8 format) was provided in the product data. Therefore, no video is embedded in this manual.