BRONC V9 Rotary Short Tattoo Pen Machine Instruction Manual

Ọja Pariview

The BRONC V9 Rotary Short Tattoo Pen Machine is a precision tattooing device powered by a Swiss motor. Designed for professional use, it offers reliable performance for various tattooing applications. This manual provides essential information for the safe and effective operation and maintenance of your BRONC V9 machine.

Image 1: The BRONC V9 Rotary Short Tattoo Pen Machine. This image displays the compact design of the tattoo pen, highlighting its sleek black finish and ergonomic shape.

Awọn ẹya pataki:

Powered by a high-performance Swiss Motor.
Motor speed: 12000 revolutions per minute (RPM).
Connection type: RCA jack.
Compact dimensions: 34 mm (diameter) x 100 mm (length).
Standard 3.5mm stroke length.

Alaye Aabo

Always adhere to professional safety and sanitation guidelines when operating tattoo equipment. This includes, but is not limited to, wearing appropriate personal protective equipment (PPE), using sterile needles and cartridges, and maintaining a clean work environment. Improper use can lead to injury or infection.

Voltage: Do not exceed the recommended working voltage of 4 ~ 5.5V. Operating at higher voltages can damage the motor and void the warranty.
Isọdọmọ: Ensure all components that come into contact with skin or ink are properly sterilized or are single-use disposable items.
Mimu: Handle the machine with care to prevent damage to internal components.

Awọn ilana iṣeto

Follow these steps to prepare your BRONC V9 tattoo machine for operation:

So agbara: Connect the tattoo pen to a compatible power supply unit using the RCA jack connection cable. Ensure the connection is secure.
Fi Abẹ́rẹ́ Káàtìrì sínú: Carefully insert a sterile cartridge needle into the machine's needle port. Twist or push until it locks securely into place.
Ṣàtúnṣe Ijinle Abẹ́rẹ́: Rotate the grip of the machine to adjust the needle depth to your desired setting. Test the mechanism to ensure smooth operation.
Agbara Tan: Turn on your power supply unit.
Ṣeto Voltage: Ṣatunṣe voltage on your power supply to the recommended working range of 4V to 5.5V. It is crucial not to exceed 5.5V to prevent motor damage.
Iṣiṣẹ Idanwo: Before use on skin, test the machine on a practice surface to confirm proper function and needle extension.

Awọn ilana Iṣiṣẹ

Once the machine is set up, you can begin tattooing. Always maintain proper technique and hygiene.

Voltage Iṣakoso: Operate the machine within the recommended voltage range of 4V to 5.5V. The powerful Swiss motor performs optimally within this range. Higher voltages are not necessary and can lead to premature wear or damage.
Grip and Stability: Hold the machine firmly and comfortably. Ensure a stable grip to maintain control during tattooing.
Needle Application: Apply the needle to the skin at the appropriate angle and depth for your desired tattooing effect (lining, shading, color packing).
Awọn isinmi: For prolonged sessions, allow the machine to rest periodically to prevent overheating, although the Swiss motor is designed for efficiency.
Disas Karo: After use, power off the machine and carefully remove the cartridge needle for disposal.

Image 2: A lineup of BRONC tattoo machines. This image showcases various models of BRONC tattoo pens, illustrating the brand's range of products.

Itoju

Proper maintenance ensures the longevity and optimal performance of your BRONC V9 machine.

Ninu: After each use, wipe down the exterior of the machine with a suitable disinfectant solution. Ensure no liquids enter the motor housing. Do not submerge the machine in any liquid.
Lubrication: The Swiss motor is designed for minimal maintenance. Avoid applying lubricants unless specifically instructed by the manufacturer, as this can attract debris.
Ibi ipamọ: Store the machine in a clean, dry, and dust-free environment when not in use. Protect it from impacts and extreme temperatures.
Ayewo: Regularly inspect the RCA connection and the needle port for any signs of wear or damage.

Laasigbotitusita

If you encounter issues with your BRONC V9 machine, refer to the following common troubleshooting steps:

Isoro	Owun to le Fa	Ojutu
Ẹrọ ko tan.	Ìsopọ̀ RCA tí kò ní ìfàmọ́ra. Ipese agbara oro. Aṣiṣe mọto.	Check and secure the RCA cable connection to both the machine and the power supply. Verify the power supply is functioning correctly and plugged in. Test with another power supply if available. Ti ọrọ naa ba wa, kan si atilẹyin alabara.
Ẹrọ gbigbọn pupọ tabi ṣe ariwo dani.	Loose internal components (e.g., motor, cam). Damaged cartridge needle. Operating at incorrect voltage.	Ensure the cartridge needle is properly seated and not damaged. Daju awọn ṣiṣẹ voltage is within the recommended 4V-5.5V range. If internal components are suspected, discontinue use and contact customer support. Do not attempt to disassemble the machine yourself.
Abẹ́rẹ́ tí kò bá nà tàbí tí kò fà sẹ́yìn dáadáa.	Improperly inserted cartridge. Debris in the needle port. Grip adjustment issue.	Remove and re-insert the cartridge needle, ensuring it clicks into place. Inspect the needle port for any obstructions and gently clean if necessary (with power off). Check if the grip is rotating freely and adjusting the needle depth as expected.

Awọn pato

Mọto: Swiss Motor
Iyara mọto: 12000/m
Asopọmọra: RCA Jack
Recommended Working Voltage: 4 ~ 5.5V
Ọgbẹ: Boṣewa 3.5mm
Àwọn ìwọ̀n (Ìwọ̀n ìpẹ̀kun x Gígùn): 34 x 100 mm
Ìwúwo: Isunmọ 10.58 iwon (300 giramu)
Olupese: BRONC

Atilẹyin ọja ati Support

BRONC is committed to providing quality products. If you experience any issues or are not completely satisfied with your BRONC V9 Rotary Short Tattoo Pen Machine, please contact our customer support team.

For assistance, please refer to the contact information provided with your purchase or visit the official BRONC website. When contacting support, please have your product model (V9) and purchase details available.

Image 3: The BIG WASP brand logo. This logo represents the parent company or associated brand, BIG WASP, known for tattoo products.

BRONC V9