Ìwé Ìtọ́ni fún Ètò Gbohungbohun Alailowaya VeGue WM-2 UHF

Ọrọ Iṣaaju

This manual provides detailed instructions for the setup, operation, and maintenance of your VeGue WM-2 UHF Wireless Microphone System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Package Awọn akoonu

The VeGue WM-2 Wireless Microphone System package includes the following items:

• 2 x Handheld Microphones
• 1 x Rechargeable Receiver (6.35mm plug)
• 2 x Awọn Oruka Ti Ko Ni Yiyọ
• 2 x Mic Covers (foam windscreens)
• 1 x Okun Ngba agbara USB
• 1 x Itọsọna olumulo

Image: VeGue WM-2 Wireless Microphone System components, including two microphones and the receiver.

Ọja Awọn ẹya ara ẹrọ

• Imọ-ẹrọ Alailowaya UHF: Designed for stable signal transmission and reduced interference compared to VHF systems.
• Dual-Channel Operation: Supports two handheld microphones simultaneously.
• Ibi ti o gbooro sii: Provides a stable signal distance of up to 200 feet (60 meters).
• Multiple Frequency Options: Offers 15 selectable frequency options per channel, allowing up to 15 sets of microphones to be used concurrently without interference.
• Ko Atunse Ohun kuro: Equipped with a professional chipset and built-in noise reduction cotton for clear audio output.
• Rechargeable Receiver: The portable receiver features a built-in rechargeable battery, offering 4-6 hours of working time after a 2-3 hour charge.
• Ikole ti o tọ: Both microphones and the receiver body are constructed from aluminum alloy for durability and lightweight handling.
• Iṣeto Rọrun: Plug-and-play functionality with automatic pairing between microphones and receiver.
• Ibamu gbooro: Compatible with devices featuring a 1/4" (6.35mm) MIC jack, such as karaoke speakers, power ampliifiers, ati PA awọn ọna šiše. Note: Not suitable for direct connection to phones or computers.

Aworan: Alaye view of the microphone's construction and display.

Image: Illustration of the 200ft stable UHF transmission signal range.

Awọn ilana iṣeto

Follow these steps to set up your VeGue WM-2 Wireless Microphone System:

1. Gba agbara si olugba: Before first use, ensure the receiver is fully charged using the provided USB cable. The charging time is approximately 2-3 hours. Do not use the receiver while it is charging to prevent potential damage.
2. Fi awọn batiri sii sinu Microphones: Each handheld microphone requires 2 x AA batteries (not included). Unscrew the bottom part of the microphone to access the battery compartment and insert the batteries, observing polarity.
3. Turn on the Receiver: Locate the ON/OFF switch on the receiver and slide it to the 'ON' position. The indicator light will illuminate.
4. Turn on the Microphones: Press and hold the power button on each microphone until the display screen illuminates. The microphones will automatically pair with the receiver.
5. Connect the Receiver to an Audio Device: Plug the 1/4" (6.35mm) jack of the receiver directly into the MIC input of your karaoke speaker, power amplifier, or PA system.
6. Ṣatunṣe Iwọn didun: Adjust the volume on your audio device and the microphone (if applicable) to your desired level.

Image: Visual guide for easy setup of the microphone system.

Video: Official product video demonstrating the setup and features of the VeGue WM-2 Wireless Microphone.

Awọn ilana Iṣiṣẹ

• Titan/Apapa: Use the power button on each microphone and the switch on the receiver to turn the units on or off.
• Atunse Igbohunsafẹfẹ: Each microphone has 15 adjustable frequencies. If you experience interference, you can change the channel on the microphone. To do this, unscrew the bottom part of the microphone to reveal a small button. Press this button to cycle through available frequencies until a clear channel is found.
• Ipo Batiri: The microphone display shows the current channel and battery status. The receiver also has indicator lights for RF signal and charging status.
• Lilo to dara julọ: For best performance, maintain a clear line of sight between the microphones and the receiver. Avoid placing the receiver near large metal objects or other electronic devices that may cause interference.

Image: Charging and working time details for the rechargeable receiver.

Itoju

• Ninu: Use a soft, dry cloth to clean the exterior of the microphones and receiver. Do not use liquid cleaners or abrasive materials.
• Ibi ipamọ: Tọju eto naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju nigbati ko si ni lilo.
• Itọju Batiri: Remove AA batteries from the microphones if they will not be used for an extended period to prevent leakage. Recharge the receiver periodically even if not in use to maintain battery health.
• Microphone Covers: The included foam mic covers help protect the microphone capsule from dust and moisture and can reduce plosive sounds. Replace them if they become worn or damaged.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

VeGue products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your product packaging or visit the official VeGue webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn idi atilẹyin ọja.