Itaniji Oni-nọmba Sharp pẹlu AccuSet - Itọsọna Olumulo Aago Ọgbọn Aifọwọyi

Ọrọ Iṣaaju

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

olusin 1: Iwaju view of the Sharp Digital Alarm Clock.

Ọja Awọn ẹya ara ẹrọ

• AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
• Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
• High/Low Dimmer Control: Imọlẹ ifihan adijositabulu.
• Batiri Afẹyinti: Pre-installed CR2032 battery for time settings retention during power outages.
• Aṣayan Agbegbe Aago: Easily select your local time zone.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Ṣeto

1. Initial Power-Up and Time Zone Selection

1. Locate the time zone switch on the bottom of the clock.
2. Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
3. Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

To adjust for Daylight Savings Time:

• Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
• For Standard Time, slide the switch to PAA to subtract one hour (-1 hr).

3. Afẹyinti Batiri

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Awọn ilana Iṣiṣẹ

Figure 3: Top panel controls and display indicators.

1. Ṣiṣeto Itaniji

1. Tẹ awọn ALAGBARA SET button once. The alarm time will flash on the display.
2. Tẹ awọn Eto wakati button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
3. Tẹ awọn Eto iseju bọtini lati ṣatunṣe iṣẹju itaniji.
4. Tẹ awọn ALAGBARA SET bọtini lẹẹkansi lati jẹrisi ati jade kuro ni ipo eto itaniji.

2. Turning Alarm On/Off

• Lati yi itaniji pada ON, tẹ awọn IKỌ NIPA / PA button. The alarm indicator light on the display will illuminate.
• Lati yi itaniji pada PAA, tẹ awọn IKỌ NIPA / PA button again. The alarm indicator light will turn off.

3. Iṣẹ lẹẹkọọkan

Nigbati itaniji ba ndun, tẹ tobi ṢEGBE button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

4. Dimmer Control

Lati ṣatunṣe imọlẹ ti ifihan LED:

• Tẹ awọn DIMMER HI/LO button to toggle between high and low brightness settings.

Àwòrán 4: Ṣíṣe àtúnṣe ìmọ́lẹ̀ ìfihàn.

Itoju

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

1. Unplug the clock from the electrical outlet.
2. Locate the screw-secured battery compartment on the bottom of the clock.
3. Unscrew the compartment cover and carefully remove the old CR2032 battery.
4. Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
5. Replace the compartment cover and secure it with the screw.
6. Plug the clock back into the electrical outlet.

Akiyesi: Sọ awọn batiri atijọ sọnu ni ifojusọna ni ibamu si awọn ilana agbegbe.

Laasigbotitusita

Awọn pato

• Brand: Dinku
• Awoṣe: B089ZMSR39
• Àwọ̀: Black-red Led
• Iru ifihan: Oni-nọmba
• Ẹya Pataki: Eto Aifọwọyi
• Awọn iwọn ọja: 5.5"W x 2.6"H
• Orisun Agbara: Okun Itanna
• Batiri Afẹyinti: 1 x CR2032 Lithium Ion (included)
• Ìwọ̀n Nkan: 10.2 iwon
• UPC: 049353004426
• Olupese: Dinku

olusin 5: Awọn iwọn ọja.

Alaye ni Afikun

For further assistance or product inquiries, please refer to the official Sharp webaaye tabi kan si atilẹyin alabara wọn.

Ọja yii jẹ apẹrẹ fun lilo inu ile nikan.