JJC BR-E1 Wireless Bluetooth Remote Control Instruction Manual

Ọrọ Iṣaaju

The JJC BR-E1 Wireless Bluetooth Remote Control is designed for select Canon cameras, offering convenient remote operation. This remote functions as a replacement for the Canon BR-E1 wireless remote control, providing various shooting modes and camera control from a distance.

This manual provides essential information for the proper setup, operation, and maintenance of your JJC BR-E1 remote control.

Ọja Awọn ẹya ara ẹrọ

• Asopọmọra Bluetooth Alailowaya: Operates via 2.4 GHz GFSK transmission for reliable connection.
• Iṣakoso iṣẹ lọpọlọpọ: Supports instant shooting, 2-second delayed shooting, video recording, autofocus (AF), and zoom functions.
• Ijinna Ṣiṣẹ: Effective range of approximately 10 meters (32.8 feet) in any direction.
• Orisun Agbara: Powered by one CR2032 battery (included).
• Iwapọ ati Gbigbe: Apẹrẹ fun irọrun gbigbe ati ibi ipamọ.

Ibamu

The JJC BR-E1 remote control is compatible with the following Canon camera models:

• Canon EOS R1, R100, R8, R50, R6 Mark II, R10, R7, R5C, R3, R5, R6, R, RP
• Canon EOS M50 Mark II, M6 Mark II, M50, M200
• Canon EOS 6D Mark II, 90D, 77D, 850D, 800D, 200D II, 200D
• Canon PowerShot V10, G5 X Mark II, G7 X Mark III, SX70 HS

Awọn akọsilẹ pataki lori Ibamu:

• The zoom function of the remote is not available on the PowerShot V10.
• For EOS R5C, the remote can only be used in photo mode. Ensure Bluetooth is enabled on your camera.
• Power zoom lenses can be zoomed directly by pressing the zoom button on the remote control.
• Some lenses may require a Power Zoom Adapter (not included) to utilize the zoom buttons on the remote.
• Nigba viewfinder shooting, the lens cannot be zoomed via the remote's zoom button.

Ṣeto

Fifi sori batiri

1. Wa ibi tí a ti lè rí i pé ó wà ní ẹ̀yìn ibi tí a ti ń lo agbára ìdarí (wo Àwòrán 1).
2. Use a small coin or tool to twist the battery cover counter-clockwise to open.
3. Insert one CR2032 battery with the positive (+) side facing up.
4. Rọpo ideri batiri ki o si yi lọra aago lati ni aabo.

Pairing the Remote with Your Camera

Follow these steps to pair the JJC BR-E1 remote control with your compatible Canon camera:

1. On your camera, navigate to the menu and enable Bluetooth.
2. Select the "Pairing" option within the camera's Bluetooth settings.
3. Nigbakannaa tẹ mọlẹ W ati T buttons on the remote control for more than 3 seconds. The indicator lamp on the remote will flash.
4. On the camera screen, confirm the pairing by pressing "OK" when prompted. The pairing process is complete when the camera indicates a successful connection.

Awọn ilana Iṣiṣẹ

Before operating, ensure your camera's drive mode is set to "remote mode" or a self-timer mode that supports remote control (e.g., 10 sec/remote).

For Photos:

• Instant Shot: Set the remote to 'S' mode (Single Shot) using the function switching button, then press the shutter release button.
• 2-Second Delayed Shot: Set the remote to '2S' mode (2-Second Delay) using the function switching button, then press the shutter release button.
• Long Exposure (Bulb Mode): Set your camera to Bulb mode. Press the shutter release button on the remote to start the exposure, and press it again to stop.
• Idojukọ: Tẹ awọn AF button to initiate autofocus.
• Sun-un: Lo awọn W (Wide-Angle) and T (Telephoto) buttons to zoom in or out with compatible power zoom lenses.

For Videos:

To start or stop video recording, ensure your camera is set to video mode. Then, press the shutter release button on the remote control.

Itoju

• Keep the remote control dry. Do not expose it to moisture or rain.
• Clean the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Tọju isakoṣo latọna jijin ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• If the remote will not be used for an extended period, remove the CR2032 battery to prevent leakage.

Laasigbotitusita

• Latọna jijin ko dahun:
  • Ṣayẹwo boya batiri ti fi sori ẹrọ daradara ati pe o ni agbara to. Rọpo ti o ba wulo.
  • Ensure the remote is within the operating distance (approx. 10m/32.8').
  • Re-pair the remote with your camera following the pairing instructions in the Setup section.
  • Verify that the camera's Bluetooth is enabled and the drive mode is set correctly.
• Zoom function not working:
  • Confirm that your lens is a power zoom lens or that you are using a compatible Power Zoom Adapter (if required).
  • The zoom function is not available during viewfinder shooting. Use Live View or screen shooting.
  • The zoom function is not supported on the PowerShot V10.
• Video recording not starting/stopping:
  • Ensure your camera is set to video mode before attempting to record.

Awọn pato

Atilẹyin ọja ati Support

Information regarding warranty coverage and customer support for the JJC BR-E1 Wireless Bluetooth Remote Control was not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for specific warranty terms and support contact details.