1Mii Bluetooth 5.3 Music Receiver User Manual

Ọrọ Iṣaaju

Figure 1: 1Mii Bluetooth 5.3 Music Receiver

This user manual provides detailed instructions for the 1Mii Bluetooth 5.3 Music Receiver (Model ML100). This device allows you to wirelessly stream audio from your Bluetooth-enabled devices to non-Bluetooth audio systems such as car stereos, home stereos, or wired headphones. Please read this manual thoroughly before using the product to ensure proper operation and to maximize its features.

Ọja Pariview

Familiarize yourself with the components and controls of your 1Mii Bluetooth Music Receiver.

olusin 2: Ọja Loriview ati Iṣakoso Awọn ẹya ara ẹrọ

• 1. Play/Pause Button: Also functions as the Bluetooth pairing button.
• 2. Volume Up / Next Track Button: Increases volume or skips to the next song.
• 3. Volume Down / Previous Track Button: Decreases volume or goes to the previous song.
• 4. Yipada agbara: ON/OFF slider.
• 5. Ibudo AUX: 3.5mm iwe o wu.
• 6. Built-in Microphone: Fun awọn ipe laisi ọwọ.
• 7. Charging Port: USB-C ibudo fun gbigba agbara.
• Atọka LED: Provides status feedback (e.g., pairing, connected, low battery).

Nọmba 3: Awọn akoonu Package

Apo naa pẹlu:

• 1 x 1Mii Bluetooth Receiver
• 1 x Type-C Charge Cable
• 1 x 3.5mm Audio Cable
• 1 x 3.5mm Metal Adapter
• 1 x Itọsọna olumulo (iwe yii)

Ṣeto

Ngba agbara si Ẹrọ

Before first use, fully charge the 1Mii Bluetooth Receiver. Connect the provided Type-C charge cable to the charging port on the device and plug the other end into a USB power source (e.g., car charger, wall adapter, computer USB port). The LED indicator will show charging status. A full charge takes approximately 2 hours and provides up to 16 hours of continuous music playback or call time.

Nọmba 4: Igbesi aye batiri ati gbigba agbara

Nsopọ si ohun Audio System

The 1Mii Bluetooth Receiver can be connected to your audio system in two ways:

1. Using the 3.5mm Metal Adapter (Direct Plug-in):

   Plug the 3.5mm metal adapter directly into the AUX port of your car stereo or home stereo system. Then, plug the 1Mii Bluetooth Receiver onto the other end of the metal adapter.

   

   Mode 1: Connect with AUX Metal Adapter

2. Lilo okun ohun afetigbọ 3.5mm:

   Connect one end of the provided 3.5mm audio cable to the AUX port on the 1Mii Bluetooth Receiver. Connect the other end of the 3.5mm audio cable to the AUX input of your car stereo, home stereo, or wired headphones.

   

   Mode 2: Connect with 3.5mm Audio Cable

olusin 5: Wide ibamu

Pairing with Your Bluetooth Device

Follow these steps to pair the 1Mii Bluetooth Receiver with your smartphone, tablet, or other Bluetooth-enabled device:

1. Agbara Tan: Slide the ON/OFF switch to the "ON" position. The LED indicator will flash blue every 3 seconds. When turned on for the first time, it automatically enters pairing mode.
2. Tẹ Ipo Sisopọ: If the device is not automatically in pairing mode, press and hold the Play/Pause/Bluetooth pairing button for 5 seconds until the LED indicator flashes rapidly, indicating it is ready to pair.
3. Mu Bluetooth ṣiṣẹ: On your smartphone or Bluetooth device, go to the Bluetooth settings and enable Bluetooth.
4. Yan Ẹrọ: Look for "ML100" in the list of available devices and select it to connect.
5. Ìmúdájú: Once successfully paired, the LED indicator will stop flashing and remain solid blue. You are now ready to play audio.

Figure 6: Plug, Power On, and Pair

The 1Mii Bluetooth 5.3 technology ensures instant pairing and maintains a strong and stable connection. It is backward compatible with Bluetooth 5.2/5.1/5.0/4.2/4.0/3.0/2.0 devices.

Figure 7: Latest Bluetooth 5.3 Technology

Awọn ilana Iṣiṣẹ

Once paired, you can control your audio playback and calls using the buttons on the 1Mii Bluetooth Receiver.

The built-in microphone allows for hands-free calls, enhancing driving safety and convenience. You can activate your voice assistant (Google Assistant or Siri) by holding the Play/Pause button for 2 seconds.

Figure 8: Ensure Driving Safety with Hands-Free Calls

Itoju

• Jẹ́ kí ẹ̀rọ náà gbẹ. Yẹra fún fífi ara hàn sí ọrinrin, òjò tàbí omi.
• Ma ṣe gbiyanju lati tunto tabi yi ẹrọ naa pada. Eyi yoo sọ atilẹyin ọja di ofo ati pe o le fa ibajẹ.
• Nu ẹrọ naa pẹlu asọ ti o tutu, ti o gbẹ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
• Tọju ẹrọ naa ni itura, aye gbigbẹ nigbati o ko ba wa ni lilo.
• Yago fun awọn iwọn otutu to gaju.

Laasigbotitusita

If you encounter issues with your 1Mii Bluetooth Receiver, please refer to the following common solutions:

• Ẹrọ ko ṣiṣẹ lori: Rii daju pe batiri ti gba agbara. So ẹrọ pọ mọ orisun agbara nipa lilo okun USB-C.
• Cannot pair with my device:
  • Ensure the 1Mii receiver is in pairing mode (LED flashing rapidly).
  • Make sure Bluetooth is enabled on your source device (phone, tablet).
  • Move the receiver closer to your source device.
  • Clear the pairing list on the 1Mii receiver by pressing and holding Volume + and Volume - buttons for 10 seconds, then try pairing again.
  • Restart both the 1Mii receiver and your source device.
• No audio or low audio:
  • Ensure the 1Mii receiver is properly connected to your audio system's AUX input.
  • Check the volume levels on both the 1Mii receiver and your audio system/source device.
  • Ensure the audio system is set to the correct input (AUX).
  • Verify that the 1Mii receiver is paired and connected to your source device.
• Intermittent connection or audio dropouts:
  • Reduce the distance between the 1Mii receiver and your source device.
  • Avoid obstacles that may block the Bluetooth signal (e.g., thick walls, metal objects).
  • Din kikọlu silẹ lati awọn ẹrọ alailowaya miiran (fun apẹẹrẹ, awọn olulana Wi-Fi, awọn ẹrọ Bluetooth miiran).
• Oluranlọwọ ohun ko dahun: Ensure you are pressing and holding the Play/Pause button for approximately 2 seconds.

Awọn pato

Alaye Aabo

Jọwọ tẹle awọn itọnisọna ailewu wọnyi:

• General safety warnings about potential interference with other wireless devices, battery handling, and temperature/humidity limitations may apply.
• Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju tabi imọlẹ orun taara fun awọn akoko pipẹ.
• Jeki ẹrọ naa kuro ninu omi ati awọn olomi miiran.
• Sọ awọn batiri sọnu daradara ni ibamu si awọn ilana agbegbe.
• Do not use the device if it has been damaged.

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the official 1Mii website or contact 1Mii customer service directly. The product is designed for reliable performance, and support is available for any operational queries or issues.

You can also find additional resources and a PDF version of the user manual at the following link: 1Mii Bluetooth Receiver User Manual (PDF)