BUFFBEE Glow Alarm Clock HRS-BLACK User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the setup, operation, and maintenance of your BUFFBEE Glow Alarm Clock HRS-BLACK. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Ọja Pariview

The BUFFBEE Glow Alarm Clock is a versatile device combining a digital alarm clock, FM radio, and a 7-color night light. It is designed to enhance your sleep and wake-up experience with customizable features.

Awọn ẹya pataki:

• 3-in-1 Iṣẹ-ṣiṣe: Digital alarm clock, FM radio, and night light.
• Imọlẹ Alẹ 7-Awọ: Adjustable with 5 brightness levels.
• Awọn itaniji Meji: Set two independent alarms with choice of FM radio, built-in beep, or bird sounds.
• Adjustable Display Dimmer: 0-100% brightness control for the time display.
• Awọn bọtini itanna: For easy operation in low light conditions.
• Aago oorun: Quick nap setting from 10 to 120 minutes.
• Aago Isun oorun Aifọwọyi Paa: Automatically turns off night light and FM radio after a set duration.
• Ibudo Gbigba agbara USB: For charging external electronic devices.
• Awọn aṣayan agbara: AC powered with AAA battery backup (batteries not included).

Awọn akoonu idii:

• 1 x BUFFBEE Glow Alarm Clock
• 1 x Agbara Adapter
• 1 x Itọsọna olumulo

Idanimọ eroja:

Wo aworan ni isalẹ fun atunyẹwoview of the alarm clock's buttons and display.

Aworan: Iwaju view of the BUFFBEE Glow Alarm Clock, showing the digital time display, alarm indicators, and control buttons on the top panel. The top edge features a light strip.

Ṣeto

1. Asopọ agbara:

1. Connect the provided power adapter to the DC input port on the back of the alarm clock.
2. Pulọọgi ohun ti nmu badọgba sinu iṣan ogiri boṣewa.

2. Àfikún Bátírì (Àṣàyàn):

Fun iṣẹ ti ko ni idilọwọ lakoko agbara outages, install 3 AAA batteries (not included) into the battery compartment on the bottom of the unit. The clock will maintain time and alarm settings, and the alarm will still function, but the display and night light may be limited to conserve power.

Aworan: Ẹyin view of the alarm clock showing the power input and battery compartment, alongside a power adapter and three AAA batteries (not included).

3. Initial Time Setting:

1. When first powered on, the display will show a default time.
2. Tẹ mọlẹ Akoko SET button (usually located on the top panel) until the hour digits flash.
3. Lo awọn +/- awọn bọtini (tabi awọn bọtini lilọ kiri iru) lati ṣatunṣe wakati naa.
4. Tẹ Akoko SET lẹẹkansi lati jẹrisi wakati naa ki o si gbe si atunṣe iṣẹju.
5. Lo awọn +/- awọn bọtini lati ṣatunṣe awọn iṣẹju.
6. Tẹ Akoko SET one more time to confirm and exit time setting mode.
7. Lati yipada laarin ọna kika wakati 12 ati wakati 24, tẹ bọtini naa 12/24H button (if available, often combined with time set or a dedicated button).

Awọn ilana Iṣiṣẹ

1. Ṣíṣeto Awọn Itaniji (Alarm 1 & Itaniji 2):

Aago naa n ṣe atilẹyin fun awọn itaniji ominira meji.

1. Tẹ awọn OOGUN 1 bọtini (tabi OOGUN 2) once to display the current alarm time.
2. Tẹ mọlẹ OOGUN 1 (tabi OOGUN 2) button until the hour digits flash.
3. Lo awọn +/- awọn bọtini lati ṣatunṣe awọn wakati.
4. Tẹ awọn Itaniji button again to confirm the hour and move to minute adjustment.
5. Lo awọn +/- awọn bọtini lati ṣatunṣe awọn iṣẹju.
6. Tẹ awọn Itaniji button again to select the alarm sound: FM radio, built-in beep, or bird sounds. Use +/- lati lọ kiri nipasẹ awọn aṣayan.
7. Tẹ awọn Itaniji button one more time to confirm and activate the alarm. An alarm icon will appear on the display.
8. To turn off an active alarm, press the corresponding Itaniji button. The alarm icon will disappear.

2. Iṣẹ́ Ìdákẹ́jẹ́ẹ́:

Tí ìró ìró bá dún, tẹ ìró ńlá náà SNOOZE / LIGHT button on top to temporarily silence the alarm for 9 minutes. The alarm will sound again after the snooze period.

3. Night Light Operation:

The alarm clock features a 7-color night light with adjustable brightness.

Image: The alarm clock shown with its top light strip illuminated in various colors, demonstrating the 7-color night light feature.

1. Tẹ awọn Imọlẹ button (often combined with SNOOZE or a dedicated button) to turn the night light on/off.
2. When the night light is on, press the Imọlẹ bọ́tìnì náà leralera láti yípo nípasẹ̀ àwọn àwọ̀ 7 tó wà.
3. To adjust the brightness, use the +/- buttons while the night light is active. There are 5 brightness levels.

4. Redio FM:

Rédíò FM tí a ṣe sínú rẹ̀ ń jẹ́ kí o lè gbọ́ àwọn ibùdó ayanfẹ́ rẹ.

Image: The alarm clock display showing FM radio frequencies (FM108.5, FM97.5, FM87.5) and icons for radio volume and sleep timer.

1. Tẹ awọn RADIO button to turn the FM radio on/off.
2. Tẹ awọn SCAN button (or similar) to automatically scan and save available FM stations.
3. Lo awọn PREV/Next buttons to navigate through saved stations or manually tune.
4. Satunṣe iwọn didun nipa lilo awọn Idibo +/- buttons. The volume can be set from 0 to 16 levels.

5. Nap Timer:

The nap timer allows for quick, short sleep periods without affecting regular alarm settings.

1. Tẹ awọn NAP button. The display will show the default nap time (e.g., 10 minutes).
2. Tẹ awọn NAP button repeatedly to cycle through preset nap durations (e.g., 10, 20, 30, 60, 90, 120 minutes).
3. The nap timer will start automatically after selection.
4. To cancel the nap timer, press the NAP button until "OFF" is displayed.

6. Auto-Off Sleep Timer:

Set a timer for the night light and/or FM radio to automatically turn off after a specified duration.

1. While the night light or FM radio is active, press the Aago orun bọtini.
2. Tẹ awọn Aago orun button repeatedly to cycle through available durations (e.g., 15, 30, 60, 90, 120 minutes, or OFF).
3. The selected duration will be displayed, and the timer will begin. The night light and/or FM radio will turn off automatically when the timer expires.

7. Display Dimmer:

Adjust the brightness of the main time display from 0% to 100%.

Image: Six different views of the alarm clock display, illustrating the range of brightness from very dim to fully bright, and also showing the night light dimmer.

Lo igbẹhin DIMMER kiakia tabi DIMMER +/- buttons (if available) to adjust the display brightness to your preference. This allows for comfortable viewing ni eyikeyi ipo ina.

8. Ibudo Gbigba agbara USB:

A USB port is located on the back of the unit for charging small electronic devices.

Image: The alarm clock with a smartphone plugged into its side USB port, indicating the charging function.

Connect your device's USB charging cable to the port. The clock must be powered by the AC adapter for the USB charging function to work.

Itoju

To ensure the longevity and optimal performance of your BUFFBEE Glow Alarm Clock, follow these maintenance guidelines:

• Ninu: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the surface.
• Agbara: Always disconnect the power adapter from the wall outlet before cleaning or if the unit will be unused for an extended period.
• Ayika: Keep the alarm clock away from direct sunlight, heat sources, and excessive moisture.
• Rirọpo Batiri: If using battery backup, replace AAA batteries annually or when the battery indicator suggests low power. Ensure correct polarity when inserting new batteries.

Laasigbotitusita

If you encounter issues with your BUFFBEE Glow Alarm Clock, refer to the following common problems and solutions:

Awọn pato

Atilẹyin ọja ati Support

BUFFBEE products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or contact BUFFBEE customer support.

If you require technical assistance or have questions regarding your BUFFBEE Glow Alarm Clock, please visit the official BUFFBEE webojú òpó wẹ́ẹ̀bù tàbí kí o kàn sí ẹ̀ka iṣẹ́ oníbàárà wọn. Àwọn àlàyé ìbáṣepọ̀ ni a sábà máa ń rí lórí àpótí ọjà tàbí lórí àwọn ilé iṣẹ́ tí ó ṣe é. webojula.