Auriol LCD Radio Controlled Digital Alarm Clock

Auriol LCD Radio Controlled Digital Alarm Clock User Manual

Model: LCD Radio Controlled Digital Alarm Clock

1. Ifihan

Thank you for choosing the Auriol LCD Radio Controlled Digital Alarm Clock. This device offers precise timekeeping with automatic time adjustment, a clear date display, dual alarm functions, and additional features like a countdown timer and temperature display. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your clock.

Auriol LCD Radio Controlled Digital Alarm Clock, front view showing time, date, and temperature display.

olusin 1: Iwaju view of the Auriol LCD Radio Controlled Digital Alarm Clock, displaying time, date, and temperature.

2. Awọn ilana aabo

Please read these safety instructions carefully before using the device to prevent damage or injury.

  • Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju, imọlẹ orun taara, tabi ọriniinitutu giga.
  • Yago fun sisọ silẹ tabi tẹriba ẹrọ si awọn ipa to lagbara.
  • Ma ṣe gbiyanju lati ṣii tabi tun ẹrọ naa funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
  • Jeki awọn batiri kuro ni arọwọto awọn ọmọde. Ti o ba gbe, wa itọju ilera lẹsẹkẹsẹ.
  • Dispose of used batteries according to local regulations. Do not dispose of batteries in household waste.
  • Nu ẹrọ naa nikan pẹlu gbẹ, asọ asọ. Ma ṣe lo abrasive ose tabi epo.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

  • 1 x Auriol LCD Radio Controlled Digital Alarm Clock
  • 2 x Alkaline Batteries
  • 1 x Itọsọna olumulo (iwe yii)

4. Eto

4.1 Fifi sori batiri

  1. Wa ideri iyẹwu batiri ni ẹhin aago naa.
  2. Gbe tabi yọ ideri naa kuro lati ṣii yara naa.
  3. Insert the 2 alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Rọpo ideri iyẹwu batiri ni aabo.
  5. Aago naa yoo tan-an yoo bẹrẹ wiwa fun ifihan agbara redio.

4.2 Initial Setup and Automatic Time Adjustment

Upon battery installation, the clock will automatically attempt to receive the radio time signal (DCF77 for Europe). This process may take several minutes. For best reception, place the clock near a window and away from electronic devices that may cause interference.

  • Once the signal is successfully received, the time and date will be set automatically.
  • Tí a kò bá gba àmì náà láàárín ìṣẹ́jú díẹ̀, gbìyànjú láti tún àkókò náà ṣe.
  • The clock will periodically synchronize with the radio signal to maintain accuracy.

5. Awọn ilana Iṣiṣẹ

This section details how to use the various functions of your Auriol clock.

5.1 Aago Afowoyi ati Eto Ọjọ

In case the radio signal is unavailable or you wish to set the time manually:

  1. Press and hold the "SET" button (or similar, refer to button labels on your device) for a few seconds until the display flashes.
  2. Use the "UP" or "DOWN" buttons to adjust the flashing value (e.g., hour, minute, year, month, day).
  3. Press "SET" again to confirm the value and move to the next setting.
  4. Repeat until all settings are adjusted, then press "SET" one last time to exit manual setting mode.

5.2 Ṣíṣeto Awọn Itaniji (Alarm 1 & Itaniji 2)

The clock features two independent alarm times, configurable for weekdays or weekends.

  1. Press the "ALARM 1" or "ALARM 2" button to select the desired alarm.
  2. Press and hold the selected alarm button until the alarm time flashes.
  3. Use "UP" or "DOWN" to adjust the hour, then press the alarm button to confirm and move to minutes.
  4. Adjust minutes, then press the alarm button. You may then be prompted to select weekday/weekend activation.
  5. Tẹ bọtini itaniji lẹẹkansi lati fipamọ ati jade.
  6. To activate/deactivate an alarm, press the corresponding alarm button briefly. An alarm icon will appear/disappear on the display.

5.3 Iṣiṣẹ Snooze

When an alarm sounds, press the "SNOOZE" button (usually a large button on top) to temporarily silence the alarm. The alarm will sound again after approximately 5-10 minutes (duration may vary by model).

To stop the alarm completely, press any other button besides "SNOOZE".

5.4 Aago kika

The clock includes a countdown timer function.

  1. Press the "TIMER" button (or similar) to enter countdown mode.
  2. Use "SET" and "UP"/"DOWN" buttons to set the desired countdown duration (e.g., hours, minutes, seconds).
  3. Press "START/STOP" to begin the countdown.
  4. When the timer reaches zero, an alert will sound.

5.5 24 Time Zones and Appointment Alarm

This clock supports setting for 24 time zones, making it suitable for travel. It also features an additional appointment alarm.

  • Refer to the specific buttons (e.g., "ZONE", "APPT") on your device for these functions.
  • Typically, you will press a "ZONE" button to cycle through time zones or enter a setting mode to adjust the offset.
  • The appointment alarm can usually be set to a specific date and time, similar to setting a regular alarm but with date parameters.

5.6 Language, Temperature Unit, and Moon Phase Display

  • Day of the Week Language: The day of the week can be displayed in 7 adjustable languages. Look for a "LANGUAGE" or "MODE" button to cycle through options.
  • Ẹka ìwọ̀ntúnwọ̀nsì: Toggle between Celsius (°C) and Fahrenheit (°F) by pressing a dedicated "°C/°F" button or a combination of buttons.
  • Alakoso Oṣupa: The clock displays the current moon phase. This is typically an automatic display based on the set date and does not require manual adjustment.

6. Itọju

6.1 Ninu

Wipe the clock's surface with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the display or casing.

6.2 Batiri Rirọpo

When the battery indicator appears on the display, it's time to replace the batteries. Follow the steps in Section 4.1 Battery Installation. Always replace both batteries at the same time with new alkaline batteries of the same type.

7. Laasigbotitusita

IsoroOwun to le FaOjutu
Aago ko ṣe afihan ohunkohun.Awọn batiri ti ku tabi fi sii lọna ti ko tọ.Ṣayẹwo polarity batiri. Rọpo awọn batiri ti o ba wulo.
Akoko ko tọ tabi ko ṣeto laifọwọyi.Poor radio signal reception. Interference from other electronics.Move the clock to a location with better reception (e.g., near a window). Keep away from TVs, computers, and other electronic devices. Initiate manual time setting if automatic adjustment fails.
Itaniji ko dun.Alarm is not activated. Alarm volume is too low (if adjustable).Ensure the alarm icon is displayed. Check alarm settings.
Ifihan ti wa ni baibai tabi flicker.Agbara batiri kekere.Rọpo awọn batiri.

8. Awọn pato

  • Brand: Auriol
  • Awoṣe: LCD Radio Controlled Digital Alarm Clock
  • Iru ifihan: LCD oni -nọmba
  • Àwọ̀: Dudu
  • Awọn ẹya pataki: Automatic time adjustment, Dual alarm, Countdown timer, Battery indicator, Multilingual day of the week, Moon phase display, Temperature display (°C/°F), 24 time zones, Appointment alarm.
  • Awọn iwọn ọja: Isunmọ 22.9 cm (W) x 16.2 cm (H) x 2.6 cm (D)
  • Orisun Agbara: Battery (2 x Alkaline batteries included)
  • Apẹrẹ: onigun merin
  • Lilo: Ninu ile
  • Ohun elo fireemu: Ṣiṣu tabi Irin

9. Atilẹyin ọja ati Support

Fun alaye atilẹyin ọja ati atilẹyin alabara, jọwọ tọka si iwe ti a pese pẹlu rira rẹ tabi kan si alagbata rẹ. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

For further assistance, please visit the official Auriol webojula tabi kan si wọn onibara iṣẹ Eka.

© 2024 Auriol. All rights reserved.