LEXON LL128N Fingerprint Padlock User Manual

1. Ti pariview

This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.

2. Awọn ẹya Ọja

• Biometric Fingerprint Recognition: Securely unlock with your fingerprint. Supports up to 10 registered users.
• Ikole ti o tọ: Made from stainless steel and zinc alloy for enhanced security.
• Alatako oju ojo: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
• Batiri pipẹ: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
• Ngba agbara USB-C: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
• Apẹrẹ didara: Designed by Guillaume Delvigne, available in multiple colors.

Image: The LEXON Nomaday Lock showcasing apẹrẹ rẹ ati awọn awọ ti o wa.

3. Package Awọn akoonu

• LEXON LL128N Fingerprint Padlock
• USB-C Ngba agbara Cable
• Itọsọna olumulo

4. Eto

4.1 Initial Fingerprint Registration (Administrator)

Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.

1. Press and hold your finger on the fingerprint sensor until the ina bulu illuminates. Release your finger.
2. Awọn ina alawọ ewe will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
3. Nigba ti ina alawọ ewe is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.

After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.

4.2 Registering Additional Fingerprints (Users 3-10)

To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.

1. Tẹ mọlẹ ìka alámùójútó on the sensor until the ina bulu illuminates. Release the finger.
2. Awọn ina alawọ ewe will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.

Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.

4.3 Deleting All Fingerprints (Factory Reset)

To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:

1. Place an ìka alámùójútó on the sensor and hold it. The ina bulu will illuminate, then turn pupa. Continue holding.
2. After the red light illuminates, the ina alawọ ewe will flash once. Release your finger immediately after the green light flashes.

All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.