Ọrọ Iṣaaju
This manual provides essential information for the safe and proper assembly, operation, and maintenance of your ARCADE1UP Frogger Arcade Game with Riser. Please read all instructions carefully before use and retain this manual for future reference.
The ARCADE1UP Frogger Arcade Game brings the classic arcade experience into your home. Navigate Frogger across busy highways and treacherous rivers to reach home safely. This unit features a 17-inch color display, full-size joystick, and buttons, and comes with a matching riser for an authentic arcade height.
Aworan: Iwaju view of the ARCADE1UP Frogger Arcade Game cabinet with its matching riser, showcasing the game screen and control panel.
Alaye Aabo
- Aabo Itanna: Always connect the power adapter to a grounded outlet. Do not expose the unit to water or excessive moisture. Disconnect power before cleaning or servicing.
- Apejọ: Ensure all components are securely fastened during assembly. Adult supervision is recommended during assembly.
- Ibi: Place the arcade unit on a stable, level surface. Avoid placing it in direct sunlight or near heat sources.
- Awọn ọmọde: This product contains small parts and electrical components. Keep out of reach of small children during assembly.
- Afẹfẹ: Ma ṣe dina awọn ṣiṣi atẹgun. Rii daju pe sisan afẹfẹ to peye ni ayika ẹyọ lati ṣe idiwọ igbona.
Package Awọn akoonu
Daju pe gbogbo awọn paati ti a ṣe akojọ si isalẹ wa ninu package rẹ:
- ARCADE1UP Frogger Arcade Cabinet
- Matching Riser
- Adapter agbara
- Joystick (pre-installed)
- Control Buttons (pre-installed)
- Assembly Hardware (screws, cam locks, etc.)
- Ilana Afowoyi (iwe yii)
Aworan: Apa view of the ARCADE1UP Frogger Arcade Game cabinet, showing its profile and wooden paneling.
Apejọ ati Oṣo
Assembly of the ARCADE1UP Frogger Arcade Game and its riser typically involves connecting pre-fabricated panels using included hardware. Follow the detailed assembly instructions provided in the separate assembly guide that came with your unit.
- Yọ awọn ohun elo kuro: Farabalẹ̀ yọ gbogbo àwọn ẹ̀yà ara kúrò nínú àpótí náà kí o sì ṣàyẹ̀wò rẹ̀ pẹ̀lú àkójọ àwọn ohun tí ó wà nínú àpótí náà.
- Assemble Riser: If using the riser, assemble it first according to its specific instructions. Ensure all connections are tight and stable.
- Ṣe apejọ Igbimọ: Follow the step-by-step instructions to assemble the arcade cabinet. Pay close attention to cable routing and connections for the display and control panel.
- Attach Cabinet to Riser: Once both are assembled, securely attach the arcade cabinet to the riser using the designated hardware.
- Asopọ agbara: Connect the power adapter to the arcade unit's power input, then plug it into a standard electrical outlet.
The assembled machine stands approximately 57.8 inches tall with the riser. Its dimensions are 45.8 inches H (57.8 inches H with riser) x 22.75 inches D x 19 inches W.
Image: A person standing and playing the ARCADE1UP Frogger Arcade Game, demonstrating the unit's operational height with the riser.
Awọn ilana Iṣiṣẹ
This section details how to power on, play, and adjust settings on your arcade unit.
- Agbara Tan: Locate the power switch, usually on the back or bottom of the control panel. Flip the switch to the 'ON' position. The display will illuminate, and the game will start.
- Ṣiṣere Ere:
- Bẹ̀rẹ̀ eré: Press the '1 Player' or '2 Player' button to begin a game.
- Gbigbe: Use the joystick to control Frogger's movement (up, down, left, right).
- Ise: Frogger typically uses only directional controls. Refer to the on-screen instructions for specific game mechanics.
- Iṣakoso iwọn didun: A volume control knob or button is typically located on the control panel or behind the unit. Adjust to your preferred sound level.
- Agbara Pa: To turn off the unit, flip the power switch to the 'OFF' position.
Aworan: Isunmọ view of the ARCADE1UP Frogger control panel, showing the joystick, player buttons, and volume controls.
Itoju
- Ninu: Use a soft, dry cloth to wipe down the cabinet and control panel. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by a dry wipe. Avoid abrasive cleaners or excessive moisture.
- Ifihan Itọju: Clean the screen with a soft, lint-free cloth specifically designed for electronics. Do not spray cleaners directly onto the screen.
- Ibi ipamọ: If storing the unit for an extended period, disconnect it from power and cover it to protect against dust. Store in a cool, dry place.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara/Ẹyọkan ko ni tan-an. | Power adapter not connected, power outlet not working, power switch off. | Ensure power adapter is securely plugged into the unit and a working outlet. Check power switch position. |
| Ko si ohun. | Volume turned down, internal speaker connection issue. | Adjust the volume control. If problem persists, contact customer support. |
| Controls (joystick/buttons) not responding. | Loose internal connection, component malfunction. | Ensure all internal connections are secure (refer to assembly guide). If issue continues, contact customer support. |
| Iboju ti ṣofo tabi daru. | Loose display cable, display malfunction. | Check display cable connections. Power cycle the unit. If problem persists, contact customer support. |
Awọn pato
- Nọmba awoṣe: 815221021365
- Brand: ARCADE1UP
- Ere: Frogger
- Ifihan: 17-inch Color LED
- Iru Adari: Joystick
- Nọmba Awọn oṣere: 1
- Ipo isẹ: Afowoyi
- Assembled Dimensions (without Riser): 19"W x 22.75" D x 45.8" H
- Assembled Dimensions (with Riser): 19"W x 22.75" D x 57.8" H
- Ohun elo: Ṣiṣu
- UPC: 815221021365
Atilẹyin ọja ati Support
For warranty information, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official ARCADE1UP webojula. O tun le ṣàbẹwò awọn ARCADE1UP Store on Amazon fun ọja alaye siwaju sii.
Jọwọ ni nọmba awoṣe rẹ (815221021365) ati ọjọ rira wa nigbati o ba kan si atilẹyin.
