Mabe EMDPCCB1 Water Cooler Instruction Manual

1. Ifihan

Thank you for choosing the Mabe EMDPCCB1 Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read these instructions thoroughly before use and retain them for future reference.

This water cooler is designed to dispense cold, hot, and room temperature water, and includes a lower cabinet for convenient beverage storage.

2. Alaye Aabo

ÌKÌLỌ̀: Láti dín ewu iná, ìkọlù iná mànàmáná, tàbí ìpalára kù, máa tẹ̀lé àwọn ìlànà ààbò pàtàkì nígbà gbogbo.

• Rii daju pe a gbe ohun elo sori iduro, ipele ipele.
• Do not operate the water cooler with a damaged power cord or plug.
• Jeki ohun elo kuro lati orun taara ati awọn orisun ooru.
• Maṣe fi ohun elo, okun, tabi pulọọgi sinu omi tabi awọn olomi miiran.
• Unplug the water cooler before cleaning or performing any maintenance.
• Ṣe abojuto awọn ọmọde lati rii daju pe wọn ko ṣere pẹlu ohun elo.
• Ohun elo yii wa fun lilo inu ile nikan.
• Maṣe ṣe idiwọ awọn ṣiṣi eefin.
• Use only bottled water designed for water coolers.

3. Ọja Ipariview

Familiarize yourself with the main components of your Mabe EMDPCCB1 Water Cooler.

Nọmba 1: Iwaju view of the Mabe EMDPCCB1 Water Cooler, showing the dispensing area and control panel.

• Water Bottle Support: Located at the top, designed to hold standard water bottles.
• Dispensing Spouts: Separate spouts for hot, cold, and room temperature water.
• Ibi iwaju alabujuto: Indicators for hot, cold, and power status.
• Drip Atẹ: Removable tray to catch spills.
• Ile-igbimọ kekere: Storage compartment for beverages or other items.
• Awọn Yipada Agbara: Located at the back for controlling heating and cooling functions independently.

Nọmba 2: Close-up of the Mabe EMDPCCB1 Water Cooler's control panel and dispensing spouts, highlighting the hot, cold, and power indicators.

4. Eto ati fifi sori

1. Ṣii silẹ: Carefully remove the water cooler from its packaging. Inspect for any damage.
2. Ibi: Place the water cooler on a firm, level surface in a cool, dry area, away from direct sunlight and heat sources. Ensure there is at least 10 cm (4 inches) of space from walls for proper ventilation.
3. Asopọ agbara: Ensure the power switches for heating and cooling (located at the back) are in the "OFF" position. Plug the power cord into a grounded electrical outlet.
4. Fi Igo Omi sori ẹrọ: Remove the cap from a standard 19-liter (5-gallon) water bottle. Carefully lift the bottle and place it onto the water bottle support at the top of the cooler. The probe will push the seal, allowing water to flow into the internal reservoirs.
5. Eto akọkọ: Before turning on the heating or cooling functions, dispense at least 1 liter (4 cups) of water from each spout (hot, cold, and room temperature) to ensure all air is purged from the system. This prevents damage to the heating element.
6. Mu Awọn Iṣẹ́ Ṣiṣẹ́: Once the system is primed, you can turn on the heating and cooling switches at the back of the unit. The indicator lights on the front panel will illuminate.

5. Isẹ

Using your Mabe EMDPCCB1 Water Cooler is straightforward:

1. Pipese Omi Tutu: Place your cup under the cold water spout (usually indicated by a blue lever or button). Press the lever/button to dispense cold water. Release to stop.
2. Pipin Omi Gbona: Place your cup under the hot water spout (usually indicated by a red lever or button). For safety, hot water spouts often have a child-safety lock. Press the safety lock (if present) and then press the lever/button to dispense hot water. Release to stop.
3. Dispensing Room Temperature Water: If your model has a dedicated room temperature spout, place your cup under it and press the corresponding lever/button.
4. Beverage Storage: The lower cabinet can be used to store beverages or other items that require cooling. Open the cabinet door to access.

6. Itọju ati Cleaning

Ṣiṣe mimọ nigbagbogbo ṣe idaniloju iṣẹ ti o dara julọ ati mimọ.

1. Yọọ: Always unplug the water cooler from the power outlet before cleaning.
2. Ode Ninu: Mu ese ita gbangba pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
3. Drip Atẹ: Remove and empty the drip tray regularly. Wash it with mild soap and water, then rinse and dry thoroughly before replacing.
4. Water Bottle Support: Clean the water bottle support area with a damp asọ.
5. Condenser Coils: Periodically clean the condenser coils at the back of the unit with a soft brush or vacuum cleaner to ensure efficient cooling.
6. Internal Cleaning (Sanitization): For thorough internal cleaning, it is recommended to follow the manufacturer's guidelines for sanitization, typically every 3-6 months. This usually involves draining the reservoirs and flushing with a sanitizing solution. Refer to the full manual for detailed steps or contact customer support.

7. Laasigbotitusita

8. Awọn pato

• Awoṣe: EMDPCCB1
• Brand: Mabe
• Awọn iwọn (Ijinle x Iwọn x Giga): 32 cm x 31 cm x 93 cm (tó tó 12.6 in x 12.2 in x 36.6 in)
• Ìwúwo: 15.6 kg (isunmọ 34.4 lbs)
• Agbara: Designed for 19 Liters (5-gallon) water bottles.
• Ohun elo: Ṣiṣu
• Power (Heating): 420W
• Power (Cooling): 90W
• Lapapọ Agbara: 510W
• Oruko Voltage: 110V~
• Igbohunsafẹfẹ Orukọ: 50/60Hz
• Hot Water Supply: 5L/h (85-95°C)
• Ipese Omi Tutu: 2-3L/h (5-10°C)
• Firiji: R134a
• Iru oju-ọjọ: ST
• Iru Idaabobo: I (against electric shock)

Nọmba 3: Diagram illustrating the dimensions of the Mabe EMDPCCB1 Water Cooler.

9. Atilẹyin ọja ati Support

Your Mabe EMDPCCB1 Water Cooler comes with a 1-odun olupese ká atilẹyin ọja. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

For technical assistance, spare parts, or warranty service, please contact Mabe customer support. Refer to the contact information provided with your product packaging or visit the official Mabe webojula.

Ọjọ akọkọ ti o wa: Oṣu kọkanla ọjọ 25, ọdun 2020