NUMATIC TTB 1840 NX Battery Scrubber Dryer

1. Ifihan

Welcome to a new era of automatic scrubbers with the NUMATIC TTB 1840 NX Lithium Battery Automatic Scrubber Dryer. This compact and semi-automatic machine with traction is powered by our latest generation lithium battery, the NX300.

The TTB 1840 NX is designed for efficient and streak-free cleaning, even in highly frequented areas. Its intuitive control station and innovative water diffusion system ensure optimal performance. The machine is fully disassemblable and foldable, facilitating easy maintenance, storage, and transport.

2. Alaye Aabo

Always read and understand all safety warnings and instructions before operating the TTB 1840 NX. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Ensure the machine is switched off and disconnected from the battery before performing any maintenance or cleaning.
• Do not operate the machine in hazardous environments or near flammable liquids or gases.
• Use only genuine NUMATIC replacement parts and accessories.
• Jeki ọwọ, ẹsẹ, ati aṣọ alaimuṣinṣin kuro ni awọn ẹya gbigbe.
• Tọju ẹrọ naa ni ibi gbigbẹ, ti o ni aabo, laisi arọwọto awọn ọmọde.

3. Irinše ati Awọn ẹya ara ẹrọ

3.1 Awọn paati bọtini

• NX300 Lithium Battery: Powerful 36V battery providing 1 hour of autonomy and fast recharging (80% in 1 hour). Compatible with other Numatic NX range products.
• Intuitive Control Station: Olumulo ore-ni wiwo fun rorun isẹ.
• 360° Water Diffusion System: Ensures even water distribution for effective cleaning.
• 200° Circular Nozzle: Designed for efficient, streak-free suction.
• Foldable and Disassemblable Design: Simplifies transport, storage, and maintenance.

3.2 Ọja Views

Nọmba 3.2.1: Iwaju view of the Numatic TTB 1840 NX Scrubber Dryer, showing the main unit, brush, and detachable NX300 battery pack.

Nọmba 3.2.2: Apa view illustrating the multi-position adjustable handle of the TTB 1840 NX, allowing for ergonomic operation and compact storage.

Nọmba 3.2.3: Alaye view of the scrubber brush and the 360° water diffusion pattern, highlighting the efficient cleaning action.

Nọmba 3.2.4: The TTB 1840 NX in operation, demonstrating its maneuverability and effectiveness in a typical commercial environment.

4. Eto

1. Ṣii silẹ: Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti. Ṣe idaduro apoti fun ibi ipamọ iwaju tabi gbigbe.
2. Apejọ: The TTB 1840 NX is designed for quick assembly. Unfold the handle and secure it in the desired operating position. Ensure all locking mechanisms are engaged.
3. Fifi sori batiri: Insert the fully charged NX300 battery into its designated compartment until it clicks securely into place.
4. Kun Omi Omi: Open the clean water tank cap and fill with appropriate cleaning solution and water as per your cleaning requirements. Do not overfill.
5. Check Recovery Tank: Ensure the recovery tank is empty before starting operation.

5. Awọn ilana Iṣiṣẹ

1. Agbara Tan: Press the power button on the intuitive control station to turn on the machine.
2. Yan Ipo: Choose the appropriate cleaning mode or brush speed if available.
3. Engage Brushes and Suction: Lower the brush deck and squeegee assembly. Activate the water flow and suction system.
4. Bẹrẹ Isọmọ: Guide the machine across the floor surface. The semi-automatic traction will assist in movement. Overlap passes slightly to ensure complete coverage.
5. Monitor Tanks: Keep an eye on the clean water tank level and the recovery tank level. Refill clean water and empty dirty water as needed.
6. Agbara Pa: Once cleaning is complete, disengage brushes and suction, then turn off the machine.

6. Itọju

Regular maintenance ensures the longevity and optimal performance of your TTB 1840 NX.

• Lẹhin lilo kọọkan:
  • Empty and rinse the dirty water recovery tank thoroughly.
  • Rinse the clean water tank.
  • Clean the squeegee blades and check for wear.
  • Mu ese ita ti ẹrọ naa pẹlu ipolowoamp asọ.
• Weekly/Bi-Weekly:
  • Inspect the brush for debris and wear. Clean or replace if necessary.
  • Check all hoses and connections for leaks or blockages.
  • Clean the filter (if applicable).
• Itọju Batiri:
  • Always charge the NX300 battery fully after each use.
  • Store the battery in a cool, dry place if not in use for extended periods.
• Ibi ipamọ: The machine can be folded and partially disassembled for compact storage. Ensure all tanks are empty and clean before storing.

7. Laasigbotitusita

Abala yii n pese awọn ojutu si awọn ọran ti o wọpọ ti o le ba pade.

• Ẹrọ ti ko tan: Check if the battery is properly inserted and fully charged. Ensure the power button is pressed firmly.
• Poor water suction: Check if the recovery tank is full, the squeegee blades are clean and intact, and the suction hose is not blocked or kinked.
• No water dispensing: Ensure the clean water tank is filled and the water flow system is activated. Check for blockages in the water lines.
• Machine not moving smoothly: Check for obstructions around the wheels or brush. Ensure the traction system is engaged.

If the problem persists, please contact NUMATIC customer support.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information, technical support, or to order spare parts, please contact your authorized NUMATIC dealer or visit the official NUMATIC website. Please have your model number (TTB 1840 NX or 912775) and purchase date ready when contacting support.

Spare parts availability information is currently unavailable through general product specifications. Please consult your dealer for specific part inquiries.