CONTEC CMS50M Fingertip Pulse Oximeter Instruction Manual

1. Ọja Ipariview

The CONTEC CMS50M Fingertip Pulse Oximeter is designed for non-invasive spot-check measurement of functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate (PR). It is suitable for use in sports and aviation, but not intended for medical diagnosis or treatment.

Image: CONTEC CMS50M Pulse Oximeter highlighting its key features.

• Accurate & Fast Results: Measures SpO2 (blood oxygen saturation), pulse rate, and displays a bar graph and pulse strength results on a digital LED display.
• Portable & Easy To Use: Lightweight (approximately 50g with batteries). Simply place your finger in the testing chamber for results.
• Comfortable & Long Battery Life: Features a soft silicone fingertip clip suitable for various finger sizes. Offers 20-30 hours of battery life and automatic power-off after 5 seconds of inactivity.
• Ko Ifihan kuro: The LED screen is designed for easy viewing and reading. A thin protective film can be removed for clearer display.

2. Kini To wa

Your CONTEC CMS50M Pulse Oximeter package includes the following items:

• CONTEC CMS50M Pulse Oximeter (x1)
• Handy Carry Pouch (x1)
• Long Lanyard (Neck/Wrist Cord) (x1)
• Itọsọna olumulo (x1)

Image: The CONTEC CMS50M Pulse Oximeter and its included accessories.

3. Eto

3.1 Fifi sori batiri

The CONTEC CMS50M Pulse Oximeter requires two AAA batteries (not included in some packages). Ensure correct polarity during installation.

1. Ṣii ideri batiri lori ẹhin ẹrọ naa.
2. Insert two AAA batteries, matching the '+' and '-' indicators inside the compartment.
3. Pa ideri batiri naa ni aabo.

Image: Correct battery installation for the pulse oximeter.

3.2 Yọ Fíìmù Ààbò kúrò

A thin protective film is applied to the screen for shipping. For optimal display clarity, gently peel off this film before first use.

3.3 Síso Lanyard pọ̀

To attach the lanyard, thread the thin loop end through the lanyard loop hole on the device. Then, pass the thicker part of the lanyard through the thin loop and pull to secure.

Image: Instructions for attaching the neck/wrist cord.

4. Awọn ilana Iṣiṣẹ

Follow these steps to take a measurement with your CONTEC CMS50M Pulse Oximeter:

1. Ensure your hands are warm and free of nail polish for accurate readings.
2. Ṣii agekuru ti pulse oximeter.
3. Insert one finger fully into the rubber opening of the oximeter, ensuring it rests flat on the sensor.
4. Press the power button on the top of the device.
5. Keep your hand still and wait a few seconds for the device to display your SpO2 and Pulse Rate readings. Movement can cause inaccurate results.
6. Once readings are stable, you can remove your finger. The device will automatically power off after 5 seconds of inactivity.

Image: Step-by-step visual instructions for using the pulse oximeter.

4.1 fidio itọnisọna

For a visual guide on how to use the CONTEC CMS50M Pulse Oximeter, please watch the following video:

Video: Official CONTEC guide on how to use the CMS50M pulse oximeter, demonstrating battery installation and measurement steps.

5. Itọju

Láti rí i dájú pé oximeter pulse rẹ pẹ́ tó àti pé ó péye, tẹ̀lé àwọn ìlànà ìtọ́jú wọ̀nyí:

• Ninu: Pa ohun elo naa pẹlu asọ asọ dampened with alcohol or a mild disinfectant. Do not immerse the device in liquid.
• Ibi ipamọ: Store the oximeter in a cool, dry place, away from direct sunlight and extreme temperatures. If not in use for an extended period, remove the batteries.
• Rirọpo Batiri: Rọpo awọn batiri nigbati itọka batiri kekere ba han loju iboju.
• Ayewo: Ṣayẹwo ẹrọ naa nigbagbogbo fun eyikeyi ami ibajẹ tabi wọ.

6. Laasigbotitusita

If you encounter issues with your pulse oximeter, consider the following:

• Ko si Ifihan/Ẹrọ ti ko tan: Check if batteries are installed correctly with the right polarity. Replace batteries if they are low or depleted.
• Awọn kika ti ko pe: Ensure your finger is fully inserted into the device and remains still during measurement. Avoid nail polish, cold fingers, or excessive movement.
• "Finger Out" or Error Message: Reinsert your finger properly. If the issue persists, ensure the sensor area is clean.
• Ibamu Alailowaya: The device is designed to fit a range of finger sizes. Ensure your finger is positioned centrally.

If problems persist after attempting these troubleshooting steps, please contact customer support.

7. Awọn pato

8. Alaye Aabo pataki

IKILO: Pulse oximeters provide an estimated oxygen saturation level. Research and safety communications indicate that certain physical traits, such as darker skin pigmentation and melanin, may cause the estimated oxygen level to appear higher than the actual value. Users are strongly recommended to establish a baseline value when healthy and at rest. It is advised to consult a licensed healthcare provider or professional on how to interpret user readings based on individual physical traits or characteristics.

This device is intended for sports and aviation use only and is not a medical device. It is not intended for continuous monitoring.

9. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation included with your product or visit the official CONTEC webojula. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.