ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire User Manual

Ọrọ Iṣaaju

O ṣeun fun riraasing the ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire. This manual provides essential information for the safe installation, operation, and maintenance of your new LED light fixture. Please read these instructions carefully before installation and retain them for future reference.

Awọn Itọsọna Aabo

• Aabo Itanna: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the main power supply is switched off at the circuit breaker before commencing any installation or maintenance work.
• Voltage: This luminaire is designed for operation with a 100-240V AC power supply. Verify your supply voltage matches this requirement.
• Iṣagbesori: Ensure the mounting surface is structurally sound and capable of supporting the weight of the luminaire.
• Idiwon IP54: This product is rated IP54, indicating protection against dust ingress and splashing water from any direction. It is suitable for both indoor and outdoor use, but not for submersion.
• Orisun Imọlẹ LED: LED lamps are built-in and cannot be changed. Do not attempt to open or modify the LED module.
• Ooru: The luminaire may become warm during operation. Avoid touching the surface directly after extended use.

Package Awọn akoonu

Please check that all components are present and undamaged before installation:

• ONE Light 67384/AN/W LED Luminaire (1 unit)
• Ohun elo iṣagbesori (awọn skru, awọn pilogi ogiri)
• Ilana Afowoyi (iwe yii)

Eto ati fifi sori

Tẹle awọn igbesẹ wọnyi fun ailewu ati fifi sori ẹrọ to tọ:

1. Igbaradi: Switch off the main power supply at the circuit breaker. Ensure the installation area is clean and dry.
2. Ibi Igbesoke: Select a suitable wall or ceiling location for the luminaire. Consider the desired light distribution and accessibility for future maintenance.
3. Siṣamisi: Use the luminaire's mounting bracket as a template to mark the drilling points on the surface.
4. Liluho: Lílo ohun èlò ìdábùú tó yẹ fún ohun èlò ògiri rẹ láti fi lu ihò ní àwọn ibi tí a sàmì sí. Fi àwọn páálí ògiri sí i tí ó bá pọndandan.
5. Asopọmọra: Connect the electrical wires from your power supply to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth) as indicated on the luminaire. Secure all connections tightly.
6. Mounting the Luminaire: Secure the luminaire to the mounting surface using the provided screws. Ensure it is firmly attached and stable.
7. Ṣayẹwo Ipari: Double-check all connections and ensure the luminaire is securely mounted. Restore power at the circuit breaker.

Image: The ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire, showcasing its sleek, round design suitable for modern indoor and outdoor environments.

Image: Technical drawing illustrating the dimensions of the luminaire: 340mm diameter and 50mm height.

Awọn ilana Iṣiṣẹ

The ONE Light 67384/AN/W luminaire is designed for simple operation.

• Titan/Apapa: Control the luminaire using a standard wall switch (push button controller type). Flip the switch to turn the light on or off.
• Orisun Imọlẹ: This luminaire features a built-in LED light source that provides warm white (WW) illumination. The LEDs are non-removable and designed for long-term use.

Itoju

Itọju deedee n ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati igba pipẹ ti ina rẹ.

• Ninu: Before cleaning, ensure the power supply to the luminaire is switched off. Use a soft, damp cloth to wipe the exterior surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Lamp Rọpo: LED lamps in this luminaire are built-in and cannot be replaced. If the LED light source fails, the entire luminaire must be replaced by a qualified professional.
• Ayewo: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. If any issues are found, switch off the power and consult a qualified electrician.

Image: EU Energy Label for the luminaire, indicating it contains built-in LED lamps that cannot be changed, in compliance with regulation 874/2012.

Laasigbotitusita

If you encounter issues with your luminaire, refer to the following common problems and solutions:

• Imọlẹ ko tan:
  • Check if the main power supply is switched on.
  • Daju pe iyipada odi wa ni ipo 'ON'.
  • Inspect electrical connections for looseness or damage (ensure power is off before inspection).
  • Ṣàyẹ̀wò ẹ̀rọ ìfọ́mọ́ra fún fíúsì tí ó ti bàjẹ́.
• Imọlẹ flickers:
  • Rii daju pe gbogbo awọn asopọ itanna wa ni aabo.
  • Daju awọn ipese agbara voltage is stable and within the specified range (100-240V).
• Imọlẹ ti o dinku:
  • Clean the luminaire's surface to remove any dust or dirt accumulation.
  • LEDs have a long lifespan, but gradual degradation can occur over many years.

If the problem persists after attempting these solutions, contact a qualified electrician or the retailer for assistance. Do not attempt to repair the luminaire yourself.

Awọn pato

Atilẹyin ọja ati Support

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. Keep your proof of purchase for any warranty claims.

If you require technical support or have questions not covered in this manual, please contact the retailer where you purchased the product or visit the official ONE Light webaaye fun awọn alaye olubasọrọ.