ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight User Manual

1. Ifihan

Thank you for choosing the ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference. This product complies with EN60598-1 and other specific standards.

2. Awọn ilana aabo

• Always disconnect the power supply at the main circuit breaker before installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician in accordance with all local electrical codes and regulations.
• Ọja yi ti wa ni apẹrẹ fun inu ile nikan. Do not install in wet or damp awọn ipo.
• Ensure the ceiling material can support the weight of the fixture.
• Maṣe kọja wat ti o pọjutage of 50W for the GU10 bulb.
• Avoid touching the bulb directly with bare hands, as oils can reduce bulb life.
• Jeki awọn ohun elo ina kuro ni imuduro ina.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• 1x Recessed Spotlight Housing (White Aluminum)
• Iṣagbesori Hardware
• Itanna Okun
• Paadi alemora

Image 1: Components of the ONE Light Trimless Recessed Spotlight, showing the mounting bracket and the light housing.

4. Eto ati fifi sori

This trimless recessed spotlight requires careful installation to achieve a seamless finish. Professional installation is recommended.

4.1 Dimensions and Preparation

Before cutting, ensure the chosen location avoids joists, pipes, or electrical wires. Refer to the dimensional diagram for precise cutout requirements.

Image 2: Dimensional diagram of the ONE Light Trimless Recessed Spotlight, indicating a 60mm diameter and 40mm height.

4.2 fifi sori Igbesẹ

1. Pa Agbara: Rii daju pe ipese agbara akọkọ si agbegbe fifi sori ẹrọ ti wa ni pipa ni fifọ Circuit.
2. Prepare Ceiling Opening: Using the provided dimensions (60mm diameter), cut a precise hole in the ceiling. For trimless installation, additional plastering work around the fixture may be required after mounting the housing.
3. Awọn isopọ Waya: Connect the electrical cord from the spotlight housing to your main electrical wiring. Ensure all connections are secure and insulated according to local electrical codes.
4. Ibugbe Oke: Insert the spotlight housing into the ceiling opening. Use the provided mounting hardware to secure the housing firmly in place. For a trimless finish, the housing should be flush with the ceiling surface, ready for plastering.
5. Install GU10 Bulb: Once the housing is securely installed and any finishing work is complete, insert a GU10 bulb (max 50W) into the lamp holder. Twist to lock it in place.
6. Apejọ ipari: Insert the inner light component into the outer housing.
7. Pada Agbara pada: Nígbà tí a bá ti parí ìfìsílẹ̀ àti gbogbo ìsopọ̀mọ́ra, dá agbára padà sí ibi tí ẹ̀rọ ìfọ́mọ́ra náà ti ń ṣiṣẹ́.

5. Awọn ilana Iṣiṣẹ

The ONE Light 10105TR/W spotlight operates via a standard wall switch connected to its electrical circuit. This fixture is ko dimmable.

5.1 Rírọ́pò Gílóòbù

To replace the GU10 bulb:

1. Pa Agbara: Always disconnect power at the circuit breaker before replacing the bulb.
2. Gba laaye lati tutu: Let the old bulb cool down completely before touching it.
3. Remove Bulb: Gently push the bulb upwards and twist it counter-clockwise to release it from the GU10 base.
4. Fi Bọlubu Tuntun sii: Align the pins of the new GU10 bulb with the slots in the lamp holder. Push upwards and twist clockwise to secure it. Ensure the new bulb is a GU10 type and does not exceed 50W.
5. Pada Agbara pada: Mu pada agbara ni awọn Circuit fifọ.

6. Itọju

The ONE Light 10105TR/W spotlight requires minimal maintenance.

• Ninu: Ensure the power is off and the fixture is cool. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Ko si Awọn apakan Iṣẹ Olumulo: Other than bulb replacement, there are no user-serviceable parts inside the fixture. Do not attempt to disassemble the unit.

7. Laasigbotitusita

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Ìmọ́lẹ̀ kìí tan:
  • Check if the power supply to the fixture is on at the circuit breaker and wall switch.
  • Ensure the GU10 bulb is correctly installed and not faulty. Try replacing it with a known working bulb.
  • Verify electrical connections are secure (consult a qualified electrician if unsure).
• Àwọn Flicker Flicker:
  • Ensure the GU10 bulb is fully seated and twisted into the base.
  • The bulb may be faulty or nearing the end of its life. Replace the bulb.
  • Check for loose wiring connections (consult a qualified electrician).

8. Awọn pato

Image 3: EU Energy Label for the luminaire, indicating compatibility with bulbs of various energy classes from A++ to E.

9. Atilẹyin ọja ati Support

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or inquiries, please reach out to your seller or the ONE Light customer service department.