1. Ifihan
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Ohun ti o wa ninu Apoti
Jọwọ ṣayẹwo awọn akoonu package lati rii daju pe gbogbo awọn ohun kan wa:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44-Key IR Remote Control
- 1 x 24V Power Adapter (US Plug)
3. Alaye Aabo
Read all safety instructions before installation and use. Keep this manual for future reference.
- Lilo inu ile Nikan: This product is designed for indoor use and is not waterproof.
- Ibi ti ina elekitiriki ti nwa: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Ilẹ fifi sori ẹrọ: Rí i dájú pé ojú ibi tí a fi sori ẹrọ náà mọ́, gbẹ, àti pé ó mọ́ tónítóní fún iṣẹ́ àlẹ̀mọ́ tó dára jùlọ.
- Gige Igi naa: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Yago fun Ooru: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Awọn ọmọde ati awọn ohun ọsin: Keep the product and its components out of reach of children and pets.
4. Eto & Fifi sori
Tẹle awọn igbesẹ wọnyi fun fifi sori ẹrọ to dara:
- Ṣetan Ilẹ: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Measure and Cut (if necessary): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- So ìlà náà pọ̀ mọ́: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- So agbara: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Mu Latọna jijin ṣiṣẹ: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Awọn ilana Iṣiṣẹ
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Awọn iṣẹ iṣakoso latọna jijin:
- Tan/Pa: Power button to turn the lights on or off.
- Atunse Imọlẹ: Lo awọn ↑ ati ↓ awọn bọtini lati mu imọlẹ pọ si tabi dinku.
- Aṣayan awọ: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- Awọn awọ DIY: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Tẹ a DIY bọtini.
- Lo awọn ↑ ati ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Tẹ kanna DIY button again to save your custom color.
- Aṣayan Ipo: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- FILASI: Jumps between colors.
- FADE3/FADE7: Ó máa ń yípadà láàárín àwọ̀ mẹ́ta tàbí méje.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- LATIO: Cycles through all modes.
- YARA/O lọra: Ṣe àtúnṣe iyàrá àwọn ipò oníyípadà.
Figure 6: Remote control in use for ambient lighting.
6. Itọju
Proper maintenance ensures the longevity of your LED strip lights.
- Ninu: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Ibi ipamọ: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Yago fun Titẹ: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. Laasigbotitusita
Ti o ba pade awọn ọran, tọka si awọn iṣoro ti o wọpọ ati awọn ojutu wọnyi:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Awọn imọlẹ ko tan. |
|
|
| Isakoṣo latọna jijin ko dahun. |
|
|
| Àwọn àwọ̀ kò tọ́ tàbí kò báradé. |
|
|
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Adẹtẹ |
| Nọmba awoṣe | PR410116-RGB-US |
| Imọlẹ Orisun Orisun | LED (5050 SMD) |
| Awọ Imọlẹ | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Gigun | 39.4 ẹsẹ (mita 12) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 Watts (Max Compatible) |
| Ọna Iṣakoso | 44-Key IR Remote Control |
| Pataki Ẹya | Color Changing, Dimmable, 8 Dynamic Modes |
| inu ile / ita gbangba Lilo | Ninu ile Nikan |
| Ohun elo | Ejò, Ṣiṣu |
| Iwọn Nkan | 9.6 iwon |
| Atọka Rendering Awọ (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Atilẹyin ọja & Atilẹyin
A ṣe àwọn ọjà Lepro fún ìgbẹ́kẹ̀lé àti iṣẹ́ tó dára. Fún àwọn àlàyé àtìlẹ́yìn pàtó àti ìrànlọ́wọ́ oníbàárà, jọ̀wọ́ wo káàdì àtìlẹ́yìn tó wà nínú ọjà rẹ tàbí kí o lọ sí Lepro tó jẹ́ ti ìjọba. webojula.
Ibi iwifunni:
- Webojula: www.lepro.com (Jọ̀wọ́ ṣàyẹ̀wò òṣìṣẹ́ ìjọba website for the most up-to-date contact information.)
- Imeeli: Tọ́ka sí àpótí ọjà tàbí webojula.