Sharp B08XMRRBHB

Ìwé Ìtọ́sọ́nà Olùlò Aago Itaniji Oni-nọmba Kekere Dijital Sharp Kekere

Model: B08XMRRBHB

Ọrọ Iṣaaju

O ṣeun fun riraasing the Sharp Small Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and longevity of your device.

Ọja Pariview

The Sharp Small Digital Alarm Clock is designed for simplicity and reliability. It features a bright red LED display, easy-to-use top button controls, and a convenient snooze function. It operates on AC power with a battery backup to maintain settings during power outages.

Sharp Small Digital Alarm Clock front view

olusin 1: Iwaju view of the Sharp Small Digital Alarm Clock, showing the red LED display.

Awọn ẹya pataki:

  • 0.6-inch Red LED Display for clear visibility.
  • Easy-to-access Top Button Controls for intuitive operation.
  • 9-Minute Snooze function for extra rest.
  • AC Powered with Battery Backup (requires 1 x 9V battery, not included) to preserve time and alarm settings during power interruptions.
  • Compact design, ideal for bedside tables.
Diagram illustrating key features of the Sharp Digital Alarm Clock

Figure 2: Diagram highlighting the 0.6" Red LED Display, Beep Alarm, 9 Minute Snooze, Easy Set Top Button Controls, and Optional Battery Backup.

Dimensions of the Sharp Small Digital Alarm Clock

Figure 3: Product dimensions: 4.63 inches (width) x 1.95 inches (depth) x 2.8 inches (height).

Awọn iṣakoso ati Ifihan

Familiarize yourself with the clock's controls and display indicators:

Oke view of Sharp Digital Alarm Clock showing button labels

olusin 4: Top view of the clock with labels for TIME, ALARM, SNOOZE, HOUR, MIN buttons, and ALARM ON/OFF switch.

  • Bọtini Akoko: A lo lati tẹ ipo eto akoko sii.
  • Bọtini itaniji: A lo lati tẹ ipo eto itaniji sii.
  • Bọtini SINOOZE: Activates the snooze function when the alarm sounds.
  • Bọ́tìnì WÁKÀTÀKÌ: Adjusts the hour in time or alarm setting mode.
  • Bọtini MIN: Adjusts the minute in time or alarm setting mode.
  • ALARM ON/OFF Switch: Ó máa ń tan tàbí pa iṣẹ́ ìkìlọ̀.
  • Atọka PM: A red dot on the display indicates PM hours.
  • ALARM Indicator: A red dot on the display indicates the alarm is set.

Ṣeto

  1. Asopọ agbara: Plug the AC power cord into a standard electrical outlet. The LED display will light up.
  2. Afẹyinti Batiri (Aṣayan ṣugbọn Ti ṣeduro):
    • Wa ibi ipamọ batiri naa ni isalẹ aago naa.
    • Insert one 9V battery (not included), observing the correct polarity (+/-).
    • Pa ideri iyẹwu batiri naa.

    Note: The battery backup only maintains time and alarm settings during a power outage; the display will not be lit when operating on battery power alone.

Awọn ilana Iṣiṣẹ

Ṣiṣeto akoko naa:

  1. Tẹ mọlẹ AKOKO bọtini. Awọn nọmba wakati yoo bẹrẹ lati filasi.
  2. Nigba dani awọn AKOKO bọtini, tẹ awọn WAKATI bọ́tìnì náà leralera láti mú kí wákàtí náà tẹ̀síwájú. Ṣàkíyèsí àmì PM fún ètò AM/PM tó tọ́.
  3. Nigba ti ṣi dani awọn AKOKO bọtini, tẹ awọn MIN bọtini leralera lati tẹsiwaju iṣẹju naa.
  4. Tu silẹ AKOKO button to save the set time. The display will stop flashing.

Ṣiṣeto Itaniji:

  1. Tẹ mọlẹ Itaniji bọ́tìnì náà. Àwọn nọ́mbà wákàtí ìkìlọ̀ náà yóò bẹ̀rẹ̀ sí í tàn.
  2. Nigba dani awọn Itaniji bọtini, tẹ awọn WAKATI button repeatedly to set the desired alarm hour. Observe the PM indicator.
  3. Nigba ti ṣi dani awọn Itaniji bọtini, tẹ awọn MIN button repeatedly to set the desired alarm minute.
  4. Tu silẹ Itaniji button to save the alarm time. The alarm time will stop flashing.
  5. Lati mu itaniji ṣiṣẹ, rọra rọra IKỌ NIPA / PA switch to the "ON" position. A red alarm indicator dot will appear on the display.
  6. Lati mu itaniji ṣiṣẹ, rọra yọ IKỌ NIPA / PA switch to the "OFF" position. The red alarm indicator dot will disappear.

Lilo Iṣẹ-Snooze:

Nigbati itaniji ba ndun, tẹ tobi ṢEGBE button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

Pipa Itaniji naa:

To turn off the alarm completely after it sounds (without snoozing), slide the IKỌ NIPA / PA yipada si ipo "PA".

Itoju

  • Ninu: Mu aago naa nu pẹlu asọ ti o tutu, ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
  • Rirọpo Batiri: Replace the 9V battery annually or if the clock fails to maintain time during a power interruption.
  • Ibi: Gbe aago sori iduro, dada alapin kuro lati orun taara, awọn orisun ooru, ati ọrinrin pupọ.

Laasigbotitusita

IsoroOwun to le FaOjutu
Ifihan jẹ òfo.No AC power; power outage.Ensure the power cord is securely plugged into a working outlet. If there's a power outage, the display will remain off even with battery backup.
Itaniji ko dun.Alarm switch is OFF; alarm time not set correctly; volume too low (not applicable for this model).Slide the ALARM ON/OFF switch to "ON". Verify the alarm time is set correctly (check AM/PM).
Time is incorrect after power interruption.Battery backup not installed or battery is dead.Install a fresh 9V battery for backup.

Awọn pato

  • Brand: Dinku
  • Awoṣe: B08XMRRBHB
  • Iru ifihan: Digital LED (Red)
  • Iwọn Ifihan: 0.6 inches
  • Orisun Agbara: Corded Electric, Battery Powered (1 x 9V battery, not included)
  • Awọn iwọn ọja: 4.63" (W) x 1.95" (D) x 2.8" (H)
  • Ìwúwo: 7.8 iwon
  • Awọn ẹya pataki: Snooze, Battery Backup
  • Ohun elo: Ṣiṣu

Atilẹyin ọja ati Support

Fun alaye nipa atilẹyin ọja tabi atilẹyin imọ-ẹrọ, jọwọ tọka si kaadi atilẹyin ọja ti o wa pẹlu ọja rẹ tabi ṣabẹwo si Sharp osise webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.

Olupese: didasilẹ

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.