Compustar 2WT13R-SF 2-Way Color LCD Remote User Manual

Ọrọ Iṣaaju

This manual provides essential information for the proper use and maintenance of your Compustar 2WT13R-SF 2-Way Color LCD Remote. This remote is designed to provide advanced control and feedback for compatible Compustar vehicle security and remote start systems.

Ibamu

Akiyesi Ibamu Pataki:

• This remote ONLY works with the Compustar PRO-T13 System. It will NOT work with other systems.
• You MUST HAVE Compustar Antenna Model ANT-2WSF kí latọna jijin yìí lè ṣiṣẹ́ dáadáa.

Ensure your existing system meets these requirements before attempting to use this remote.

Ọja Pariview

Key Awọn ẹya ara ẹrọ

• 2-Way Communication: Receive instant confirmation on the remote's LCD screen.
• Color LCD Display: Provides clear visual feedback on vehicle status.
• Up to 3 Mile Range: Extended operating range for convenience.
• Ergonomic Design: Comfortable to hold and use.
• Real-time Vehicle Status: Displays battery voltage and interior temperature (if supported by system).

Awọn paati latọna jijin

The Compustar 2WT13R-SF remote features a vibrant color LCD screen and intuitive buttons for controlling your vehicle's functions.

Aworan: Iwaju view of the Compustar 2WT13R-SF remote, displaying its color LCD screen with vehicle status icons and control buttons.

Aworan: Angled view of the Compustar 2WT13R-SF remote, showcasing its sleek design and button placement.

Ṣeto

This remote is a replacement or additional remote for an existing Compustar PRO-T13 system. It requires programming to your vehicle's system to function.

Important: This package DOES NOT INCLUDE programming instructions. You must use the instructions that came with your PRO-T13 system or consult a certified Compustar installer for programming.

Typically, programming involves a sequence of steps using the vehicle's ignition and the remote's buttons. Refer to your PRO-T13 system's installation or user manual for detailed programming procedures.

Isẹ

The 2WT13R-SF remote provides intuitive control over your vehicle's functions. The exact functions and button presses may vary slightly based on your PRO-T13 system's configuration.

Awọn iṣẹ ipilẹ:

• Titiipa: Tẹ awọn Titiipa button (usually indicated by a closed padlock icon) once to lock your vehicle's doors. The remote will provide visual and audible confirmation.
• Ṣii silẹ: Tẹ awọn Ṣii silẹ button (usually indicated by an open padlock icon) once to unlock your vehicle's doors. Confirmation will be displayed on the LCD.
• Ibẹrẹ jijin/Duro: Tẹ mọlẹ Bẹrẹ/Duro button (often a power icon) for approximately 2-3 seconds to remote start or stop your vehicle. The LCD will show engine status.
• Itusilẹ ẹhin mọto: Tẹ mọlẹ ẹhin mọto button (if available, usually an open trunk icon) for 2-3 seconds to pop the trunk.
• Ẹ̀rù: Tẹ mọlẹ Ẹ̀rù button (if available, often a horn icon) for 2-3 seconds to activate the vehicle's alarm. Press again to disarm.

Refer to your PRO-T13 system manual for advanced features, custom button programming, and detailed LCD icon explanations.

Itoju

Rirọpo Batiri:

The 2WT13R-SF remote uses a replaceable battery. When the battery icon on the LCD indicates low power, or the remote's range decreases significantly, it's time to replace the battery.

1. Wa yara batiri ni ẹhin isakoṣo latọna jijin.
2. Carefully open the compartment using a small flat-head screwdriver or a coin.
3. Note the orientation of the old battery and remove it.
4. Insert a new battery (typically a CR2032 coin cell, but verify with your PRO-T13 manual or the remote's markings) with the positive (+) side facing up.
5. Pa yara batiri naa ni aabo.

Itọju ati Fifọ:

• Avoid exposing the remote to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Clean the remote with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Protect the LCD screen from scratches. Consider purchasing a protective case.

Laasigbotitusita

Awọn oran ti o wọpọ ati Awọn ojutu:

• Latọna jijin Ko Dahun:
  • Check the remote's battery and replace if low.
  • Ensure you are within range of the vehicle and the ANT-2WSF antenna.
  • Verify the remote is properly programmed to your PRO-T13 system. If unsure, consult your system's manual or a professional installer.
• Ipò Iṣiṣẹ́ Kúrú:
  • Rọpo batiri latọna jijin naa.
  • Ensure there are no major obstructions (buildings, hills) between the remote and the vehicle.
  • Ṣayẹwo awọn orisun kikọlu redio ni agbegbe naa.
• Awọn oran Ifihan LCD:
  • If the display is dim or flickering, replace the battery.
  • If the display is blank, ensure the remote is powered on (if applicable) and the battery is charged.

For persistent issues, contact Compustar customer support or a certified Compustar dealer.

Awọn pato

Atilẹyin ọja ati Support

This Compustar product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your original Compustar PRO-T13 system or visit the official Compustar webojula.

For technical support, troubleshooting assistance beyond this manual, or to locate a certified installer, please contact Compustar customer service or your authorized Compustar dealer.