Ọrọ Iṣaaju
The Youmile CN3791 is a 12V solar charge controller board designed for single-cell lithium batteries. It features Maximum Power Point Tracking (MPPT) to efficiently extract power from solar panels, ensuring optimal charging performance even with varying light intensity. This module automatically adjusts to maximize the power output from your photovoltaic cells, converting it into charging current for your battery.
Nọmba 1: Youmile CN3791 12V MPPT Solar Charge Controller Board with JST PH2.0 cables.
Ọja Pariview
Yi apakan pese a visual loriview of the CN3791 module, highlighting its key components and interfaces.
Nọmba 2: Oke view of the CN3791 board, displaying the main chip, inductor, capacitor, and JST PH2.0 connectors for solar input and battery output.
Nọmba 3: Isalẹ view of the CN3791 board, indicating potential voltage selection points (5V, 6V, 9V, 12V). For this specific 12V model, the input voltage requirement is 12V for charging a 3.7V lithium battery.
Eto ati Awọn isopọ
Follow these steps to correctly connect your solar panel and battery to the CN3791 charge controller board.
- Ṣe idanimọ Awọn Asopọmọra: The board has two sets of JST PH2.0 connectors. One set is labeled "SOLAR IN" for the solar panel, and the other is labeled "BAT+" and "BAT-" for the lithium battery.
- Solar Panel: Insert the solar panel's JST PH2.0 connector into the "SOLAR IN" port. Ensure correct polarity (+ to + and - to -).
- Batiri Sopọ: Insert the lithium battery's JST PH2.0 connector into the "BAT+" and "BAT-" ports. Again, observe correct polarity.
- Optional Load Connection: The board also provides output terminals for a 3.7V load, allowing the battery to power a device while being charged.
Nọmba 4: Connection diagram illustrating how to connect the solar panel, 3.7V lithium battery, and an optional 3.7V load to the CN3791 module using JST PH2.0 interfaces.
Nọmba 5: The CN3791 board with the included JST PH2.0 cables connected, ready for solar panel and battery integration.
Nọmba 6: A sunmọ-soke view of the JST PH2.0 connector cable, typically used for connecting the solar panel and battery to the charge controller.
Awọn ilana Iṣiṣẹ
Once connected, the CN3791 module operates automatically to charge your lithium battery.
- Automatic MPPT: The integrated CN3791 chip continuously tracks the maximum power point of the solar panel. This ensures that the maximum available power is harvested from the solar panel and converted into charging current for the battery, even under varying light conditions.
- Ilana gbigba agbara: When the solar panel receives sufficient light, the module will begin charging the connected 3.7V lithium battery. The charging status may be indicated by onboard LEDs (refer to specific board markings if present).
- Idaabobo overcharge: The module is designed to prevent overcharging of the lithium battery, extending its lifespan.
Itoju
The CN3791 solar charge controller board requires minimal maintenance to ensure long-term performance.
- Jeki mimọ: Ensure the board is free from dust, dirt, and moisture. Use a soft, dry brush or cloth for cleaning if necessary.
- Idaabobo Ayika: Operate the module within its specified temperature and humidity ranges. Avoid exposure to extreme conditions or corrosive environments.
- Ṣayẹwo awọn isopọ: Periodically check all JST PH2.0 connections to ensure they are secure and free from corrosion.
Laasigbotitusita
If you encounter issues with your CN3791 solar charge controller, consider the following troubleshooting steps:
- Ko si Ifihan Gbigba agbara:
- Verify that the solar panel is receiving sufficient sunlight.
- Check all connections (solar panel to board, battery to board) for proper seating and polarity.
- Rii daju oorun nronu voltage is appropriate for the 12V input requirement of the board.
- Confirm the battery is a compatible 3.7V lithium battery.
- Gbigba agbara kekere lọwọlọwọ:
- Ensure the solar panel is clean and free from obstructions.
- Check for any damage to the solar panel or connecting wires.
- Verify that the solar panel's power output matches the board's capabilities.
- Board Overheating:
- Rí i dájú pé afẹ́fẹ́ tó péye wà ní àyíká ọkọ̀ náà.
- Daju pe awọn input voltage and current from the solar panel do not exceed the board's maximum ratings.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | JK-YM-046 |
| Iṣagbewọle Voltage | 12 Volts (from solar panel) |
| O wujade Voltage | Designed for 3.7V single-cell lithium battery charging |
| Gbigba agbara Iru | MPPT (Ìtẹ̀lé Pápá Ibùdó Agbára Tó Pọ̀ jùlọ) |
| Batiri Iru | Single-cell lithium battery |
| Awọn asopọ | JST PH2.0 |
| Awọn iwọn (L x W x H) | 45mm x 20mm x 12mm (approximate, based on image) |
| Iwọn | 10 giramu (tó súnmọ́) |
Nọmba 7: Physical dimensions of the CN3791 module, showing a length of 45mm and a width of 20mm.
Atilẹyin ọja ati Support
For warranty information or technical support, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific details.
An official user manual in PDF format is also available for download: Gba PDF Afowoyi