Fanvil i10D IP Intercom System User Manual

1. Ifihan

The Fanvil i10D is a compact and efficient IP intercom system designed for secure communication and access control. This manual provides detailed instructions for the installation, operation, and maintenance of your Fanvil i10D device, ensuring optimal performance and longevity. Please read this manual thoroughly before using the product.

2. Alaye Aabo

• Ensure the device is installed by qualified personnel in accordance with local electrical codes.
• Ma ṣe fi ẹrọ naa han si omi tabi awọn iwọn otutu to gaju.
• Use only the power adapter specified by the manufacturer.
• Yẹra fún gbígbé ẹ̀rọ náà sí ẹ̀gbẹ́ àwọn pápá oníná mànàmáná tó lágbára.
• Do not attempt to open or repair the device yourself. Contact authorized service personnel.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Fanvil i10D IP Intercom Unit
• Oke Atẹgun
• Skru ati odi Plugs
• Awọn ọna fifi sori Itọsọna

4. Ọja Ipariview

The Fanvil i10D features a robust design with essential components for effective communication and access control.

Nọmba 4.1: Iwaju view of the Fanvil i10D IP Intercom System. The device features a dark grey upper section with a speaker grille and a microphone opening, and a silver lower section. Below the speaker, there are two black buttons: one with a phone icon for calling, and another with a key icon for door unlock.

Awọn eroja pataki:

• Agbọrọsọ: Located behind the grille in the upper section, for clear audio output.
• Gbohungbohun: A small circular opening above the speaker grille, for voice input.
• Bọtini Ipe: Marked with a phone icon, used to initiate a call to a pre-configured extension.
• Door Unlock Button: Marked with a key icon, used to remotely unlock a connected door.

5. Eto ati fifi sori

5.1 Iṣagbesori ẹrọ

1. Choose a suitable location for installation, typically near an entrance or access point.
2. Use the mounting bracket as a template to mark drilling holes on the wall.
3. Lu ihò ki o si fi odi plugs.
4. Ṣe aabo akọmọ iṣagbesori si odi nipa lilo awọn skru ti a pese.
5. Attach the Fanvil i10D unit to the mounting bracket, ensuring it clicks securely into place.

5.2 Waya ati awọn isopọ

The Fanvil i10D supports Power over Ethernet (PoE) for simplified installation.

• Isopọ nẹtiwọki: Connect an Ethernet cable from your PoE-enabled network switch or PoE injector to the RJ45 port on the back of the i10D.
• Door Lock Connection (Optional): If connecting to an electronic door lock, refer to the wiring diagram in the Quick Installation Guide for proper connection to the relay output terminals. Ensure correct polarity and voltage.

5.3 Iṣeto ni ibẹrẹ

After physical installation, the device requires network configuration.

1. The i10D will obtain an IP address via DHCP by default. You can find its IP address using a network scanner or Fanvil's IP Scanner tool.
2. Ṣii a web browser and enter the device's IP address to access its web-orisun isakoso ni wiwo.
3. Log in using the default username and password (refer to the Quick Installation Guide for default credentials).
4. Configure SIP account settings, network parameters, and door access control settings as required by your system.

6. Awọn ilana Iṣiṣẹ

6.1 Ṣiṣe ipe kan

• To initiate a call, press the Bọtini ipe (phone icon).
• The i10D will dial the pre-configured extension or SIP address.
• Once the call is connected, you can communicate with the recipient via the built-in speaker and microphone.

6.2 Ngba ipe kan

The Fanvil i10D is primarily designed for outgoing calls from the intercom to an internal station. Incoming calls to the i10D are typically not supported for direct voice communication, but it can receive commands for actions like door unlocking.

6.3 Door Unlock Function

• During an active call from the i10D to an indoor station, the recipient can send a DTMF code (e.g., '*') to trigger the door unlock relay.
• Ni omiiran, awọn Door Unlock Button (key icon) on the i10D can be configured to directly trigger the relay, allowing local access control. This function is typically used by authorized personnel.

7. Itọju

• Ninu: Use a soft, dry cloth to clean the surface of the device. Do not use abrasive cleaners or solvents.
• Awọn imudojuiwọn famuwia: Lojoojumọ ṣayẹwo osise Fanvil. website for firmware updates to ensure optimal performance and security. Follow the instructions provided with the firmware.
• Awọn ipo Ayika: Rí i dájú pé ẹ̀rọ náà ń ṣiṣẹ́ láàárín ìwọ̀n otútù àti ọriniinitutu tí a ti sọ tẹ́lẹ̀ láti dènà ìbàjẹ́.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

Fanvil products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fanvil website. For technical support, troubleshooting assistance, or service inquiries, please contact your local distributor or Fanvil customer service through their official channels.

Osise Webojula: www.fanvil.com