IROAD NX7 Dash Cam olumulo Afowoyi

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• IROAD NX7 Main Unit (Front Camera)
• Kamẹra ẹhin
• Ru Kamẹra Asopọ USB
• OBD-II Power Cable (for general and hybrid vehicles)
• 16GB MicroSD Kaadi
• Afowoyi Olumulo (iwe-ipamọ yii)
• Adhesive Mounts
• Ngba agbara USB
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Ọja Pariview

Familiarize yourself with the components and their functions.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Lẹnsi Kamẹra iwaju: Ṣe àkọsílẹ̀ view through the front windshield.
• LED aabo: Indicates recording status and acts as a security deterrent.
• LED iṣẹ: Shows the device's operational status.
• 3-inch Touch Panel Display: Fun viewn gbe footage, playback, and accessing settings.
• Iho kaadi MicroSD: Insert the provided MicroSD card for video storage.
• Agbara Yi pada: Lati tan-an tabi pa ẹrọ naa.
• DC-IN Power Terminal: Ó so mọ́ okùn agbára.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: So okun kamẹra ẹhin pọ.

Kamẹra ẹhin

• Lẹnsi Kamẹra Tẹhin: Ṣe àkọsílẹ̀ view through the rear windshield.
• LED iṣẹ: Indicates the rear camera's operational status.

Ṣeto

1. MicroSD Kaadi Fi sii

1. Rii daju pe kamera dash ti wa ni pipa.
2. Locate the MicroSD card slot on the side of the main unit.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Ru kamẹra fifi sori

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Wa ibudo OBD-II ti ọkọ rẹ (nigbagbogbo labẹ dasibodu ni ẹgbẹ awakọ).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Route the power cable neatly to avoid interference with driving controls.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. So eriali GPS naa si ipo kan pẹlu aaye ti o han gbangba view of the sky, typically on the dashboard or near the windshield.

Awọn ilana Iṣiṣẹ

Titan / Pipa agbara

• Agbara Tan: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Agbara Pa: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Awọn igbasilẹ Gbigbasilẹ

The IROAD NX7 supports various recording modes:

• Igbasilẹ Gbigbawọle: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage bi iṣẹlẹ file, tí ó ń dènà kí a má baà tún kọ ọ́ síta.
• Parking Surveillance (24-hour Recording):
  • Iwari išipopada: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Records when an impact is detected while parked.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Isẹ Panel Fọwọkan

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewgbigba Awọn igbasilẹ

• Lori Ẹrọ: Access the playback menu on the touch screen to view recorded videos directly.
• On a Computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webojula) si view and manage recordings.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Itoju

MicroSD Card Management

• Iṣagbekalẹ deede: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewer software.
• Ìgbésí ayé káàdì: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Ninu Ẹrọ

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Ma ṣe lo awọn olutọpa abrasive tabi awọn olomi, nitori wọn le ba ẹrọ jẹ.
• Ensure the lenses are clean and free of smudges for clear video quality.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.