1. Eto
1.1 Unboxing ati Ni ibẹrẹ idiyele
Upon receiving your Tecno BDE01 earbuds, locate the ear-tips and USB-C charging cable within the inner box. Before first use, ensure to remove any insulating film from both earbuds. Fully charge both the earbuds and the charging case using a specified 5V/1A USB adapter.
Aworan 1.1: Tecno BDE01 Earbuds resting in their charging case, indicating charge status with LED lights.
1.2 Selecting Ear-Tips
The earbuds come with three sizes of ear-tips (Small, Medium, Large) to ensure a secure and comfortable fit. Experiment with different sizes to find the best fit for your ears, which is crucial for optimal sound quality and noise isolation.
Aworan 1.2: A selection of silicone ear-tips in different sizes to customize fit.
1.3 Sisopọ pẹlu Ẹrọ Rẹ
To pair the earbuds with your device, first take them out of the charging case. They will automatically enter pairing mode. On your device, go to Bluetooth settings and select "TECNO-BDE01" for stereo mode or left earbud mono mode. If you wish to use only the right earbud in mono mode, select "TECNO-BDE01-R".
Aworan 1.3: A smartphone displaying the Bluetooth pairing menu, with TECNO-BDE01 highlighted as an available device.
1.4 Video Guide: TECNO BDE01 Earbuds Overview
Fidio 1.1: An official video from Tecno-Mobile-Official demonstrating the features and basic setup of the TECNO BDE01 True Wireless Earbuds.
2. Awọn ilana Iṣiṣẹ
The Tecno BDE01 earbuds feature intuitive touch controls for various functions. Below is a guide to their operation:
Aworan 2.1: Visual representation of the touch controls for music, calls, and voice assistant functions.
2.1 Sisisẹsẹhin Orin
- Ṣiṣẹ/Daduro: Tap the touch panel of either the Left (L) or Right (R) earbud twice.
- Previous Track (Twin Mode Only): Hold the Left (L) earbud for 2 seconds.
- Next Track (Twin Mode Only): Hold the Right (R) earbud for 2 seconds.
2.2 Awọn ipe foonu
- Idahun/Ipe Ipari: Single tap the touch panel of either the Left (L) or Right (R) earbud.
- Kọ Ipe: Long press the touch panel of either earbud for 2 seconds.
2.3 Iranlọwọ ohun
- Activate Voice Assistant (Twin Mode Only): Tap the touch panel of the Left (L) earbud twice.
2.4 Iṣakoso iwọn didun
The Tecno BDE01 wireless earbuds do not have a built-in volume control function. Please adjust the volume directly from your connected device.
2.5 Mono & Twin Mode
Both earbuds support Mono Mode, allowing either earbud to function independently. Seamlessly swap between Left & Right earbuds. If you power on the left earbud while using the right earbud individually, the right earbud will disconnect, and both will automatically reconnect to enter Twin Mode. If you power on the right earbud while using the left individually, they will automatically reconnect and enter Twin Mode, with the left earbud continuing to work throughout this process.
Aworan 2.2: Demonstrates the flexibility of using earbuds individually (Mono Mode) or together (Twin Mode).
3. Itọju
3.1 Ninu
Regularly clean your earbuds and charging case to maintain optimal performance and hygiene. Use a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials. For ear-tips, remove them from the earbuds and clean with mild soap and water, then dry thoroughly before reattaching.
3.2 Gbigba agbara
Charge the earbuds by placing them back into their charging case. The case itself is charged via the provided USB-C cable. The LED indicators on the case show the charging status and battery level.
Aworan 3.1: Earbuds in their charging case, connected via USB-C for recharging.
3.3 Omi Resistance
The earbuds are IPX5 water-resistant, protecting against rain and sweat. However, do not submerge the earbuds directly in water, and avoid wearing them while swimming or surfing.
Aworan 3.2: User demonstrating the IPX5 water resistance during a workout.
4. Laasigbotitusita
4.1 Sisọ ọrọ
If the earbuds fail to pair or connect successfully, try the following steps:
- Rii daju pe awọn agbekọri mejeeji ti gba agbara ni kikun.
- Place both earbuds back into the charging case, close the lid, and wait for 5 seconds.
- Open the lid and remove the earbuds. They should automatically enter pairing mode.
- On your device, forget or delete the "TECNO-BDE01" and "TECNO-BDE01-R" entries from your Bluetooth list.
- Restart your device and attempt the pairing process again.
4.2 Atunto ile-iṣẹ
If pairing issues persist, a factory reset may resolve the problem:
- Gbe awọn afikọti mejeeji sinu ọran gbigba agbara.
- Press and hold the multi-function button on both earbuds simultaneously for approximately 10-15 seconds until the LED indicators flash red and white, then release.
- Close the charging case lid and wait for a few seconds.
- Open the lid and remove the earbuds. They should now be reset to factory settings.
- Tún ṣe ilana isopọmọ gẹ́gẹ́ bí a ti ṣàlàyé rẹ̀ ní Apá 1.3.
5. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Tecno |
| Nọmba awoṣe | TECNO BDE01 |
| Asopọmọra Technology | Ailokun (Bluetooth) |
| Ẹya Bluetooth | 5.0 |
| Bluetooth Ibiti | 10 Mita |
| Igbesi aye batiri (Earbuds) | Titi di wakati 8 lori idiyele kan |
| Lapapọ akoko ere (pẹlu Ọran Gbigba agbara) | Titi di wakati 22 |
| Ariwo Iṣakoso | CVC 8.0 Ayika Noise Ifagile |
| Omi Resistance Ipele | IPX5 (Mabomire) |
| Audio Driver Type | Yiyi Awakọ |
| Ọna Iṣakoso | Iṣakoso ifọwọkan |
6. Atilẹyin ọja ati Support
6.1 atilẹyin ọja Alaye
For detailed warranty information regarding your Tecno BDE01 True Wireless Bluetooth Earbuds, please refer to the warranty card included in your product packaging or visit the official Tecno webojula.
6.2 Onibara Support
If you encounter any issues or have questions about your Tecno BDE01 earbuds, please contact customer support at: service@tecnomobile.com