Ọrọ Iṣaaju
O ṣeun fun riraasing the Edifier M201BT Multimedia Computer Speaker System. This manual provides essential information for the proper setup, operation, and maintenance of your new speaker system. Please read it thoroughly before use and retain it for future reference.
The Edifier M201BT system delivers powerful audio with a dedicated subwoofer, offering versatile connectivity options including Bluetooth 5.0 and Aux input, suitable for various audio sources.
Package Awọn akoonu
- 1 x Subwoofer
- Àwọn Agbọrọsọ Satẹlaiti 2 x
- 1 x Iṣakoso latọna jijin ti firanṣẹ
- 1 x 3.5mm Audio Cable
- 1 x Okun Agbara
- 1 x Itọsọna olumulo (iwe yii)
Ọja Pariview
Figure 1: Edifier M201BT Multimedia Computer Speaker System. This image displays the complete 2.1 speaker system, including the central subwoofer unit and two compact satellite speakers, all in a black finish.
Figure 2: Subwoofer Rear Panel. This close-up view of the subwoofer's rear panel highlights the various input ports, including AUX, and control knobs for volume and bass adjustment, along with the power switch.
Figure 3: Satellite Speakers. A pair of compact satellite speakers are shown, designed to complement the subwoofer and provide clear mid-range and high-frequency audio.
Awọn eroja pataki:
- Subwoofers: Houses the 5-inch woofer for strong bass output and the main control panel.
- Àwọn Agbọrọsọ Satẹlaiti: Two compact speakers for stereo sound.
- Iṣakoso Latọna jijin ti firanṣẹ: Allows convenient adjustment of volume and bass.
Awọn ilana iṣeto
1. Ifiweranṣẹ
- Place the subwoofer on the floor or a sturdy surface, ensuring adequate ventilation.
- Position the satellite speakers on either side of your listening area, facing towards you for optimal stereo imaging.
2. Awọn isopọ
- So Awọn Agbọrọsọ Satẹlaiti pọ: Plug the cables from the satellite speakers into the 'Satellite Speaker Out' ports on the rear of the subwoofer. Ensure correct polarity (red to red, black to black).
- So Iṣakoso Latọna jijin Waya pọ: Plug the wired remote control into its dedicated port on the subwoofer.
- Asopọ agbara: Connect the power cable to the subwoofer and then to a power outlet.
- Asopọ Orisun Olohun: Yan ọkan ninu awọn ọna wọnyi:
- Iṣawọle Iranlọwọ: Use the provided 3.5mm audio cable to connect your audio source (PC, tablet, smartphone, TV) to the 'AUX' input on the subwoofer's rear panel.
- Asopọ Bluetooth:
- Tan ẹrọ agbohunsoke.
- Press the input selection button on the wired remote control until the Bluetooth indicator (blue LED) is lit.
- On your audio device, search for Bluetooth devices and select 'EDIFIER M201BT' to pair.
- Once paired, the Bluetooth indicator will remain solid blue.
Awọn ilana Iṣiṣẹ
1. Agbara Tan / Paa
- Flip the power switch on the rear of the subwoofer to the 'ON' position to power on the system.
- Flip the power switch to 'OFF' to power off the system.
2. Volume and Bass Control
- Iwọn didun: Use the main knob on the wired remote control or the 'Volume/Input' knob on the subwoofer's rear panel to adjust the overall volume.
- Bass: Use the 'Bass' knob on the subwoofer's rear panel to adjust the bass level to your preference.
3. Aṣayan Input
- Press the input selection button on the wired remote control to cycle between Aux input (green LED) and Bluetooth input (blue LED).
Itoju
- Regularly clean the speaker surfaces with a soft, dry cloth.
- Yago fun lilo abrasive ose tabi epo.
- Keep the speakers away from direct sunlight, heat sources, and moisture.
- Ensure proper ventilation around the subwoofer to prevent overheating.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si ohun | Power not connected/on; Incorrect input selected; Volume too low; Cables loose. | Ensure power is on; Select correct input (green for Aux, blue for Bluetooth); Increase volume; Check all cable connections. |
| Bluetooth ko sopọ | Speakers not in Bluetooth mode; Device not discoverable; Interference. | Switch speakers to Bluetooth mode (blue LED); Ensure device's Bluetooth is on and discoverable; Move closer to speakers; Disconnect other Bluetooth devices. |
| Iyipada ohun | Volume too high; Audio source issue; Loose connections. | Lower volume on speakers and/or audio source; Test with a different audio source; Check all cable connections. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | M201BT |
| Brand | Atunṣe |
| Agbọrọsọ Iru | 2.1 Channel Speaker System (Bookshelf) |
| Lapapọ agbara tente oke | 68 Wattis |
| Awakọ Subwoofer | 5-inch Woofer |
| Asopọmọra | Bluetooth 5.0, Auxiliary (3.5mm) |
| Ọna Iṣakoso | Wired Remote Control, Knobs on Subwoofer |
| Ohun elo apade | Igi |
| Ọja Mefa | 13.27 x 9.72 x 11.61 inches |
| Iwọn Nkan | 7.7 iwon |
Alaye Aabo
- Maa ṣe fi ọja han si ojo tabi ọrinrin.
- Do not open the speaker enclosure. Refer servicing to qualified personnel.
- Yago fun gbigbe ọja si sunmọ awọn orisun ooru tabi ni taara imọlẹ orun.
- Rii daju pe fentilesonu to dara lati ṣe idiwọ igbona.
Atilẹyin ọja ati Support
The Edifier M201BT Multimedia Computer Speaker System comes with a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official Edifier webojula.
For technical support, troubleshooting assistance, or any inquiries regarding your product, please contact Edifier customer service through their official channels. Contact information can typically be found on the Edifier webaaye tabi ni apoti ọja.