Fellowes CRC 57156
Fellowes Lunar A4 Laminator CRC 57156 User Manual
Ọja Pariview
The Fellowes Lunar A4 Laminator CRC 57156 is designed for protecting and preserving your documents. This laminator is suitable for A4 size documents and uses laminating pouches up to 125 microns thick. It features visual and audible indicators for readiness and a jam release function for convenience, ensuring smooth operation for your lamination needs.
Awọn Itọsọna Aabo pataki
Please read these instructions carefully before using the laminator. Keep this manual for future reference.
- Always connect the laminator to a properly grounded power outlet.
- Ma ṣe ṣiṣẹ laminator ti okun tabi plug ba bajẹ.
- Keep hands and loose clothing away from the entry and exit slots during operation.
- Do not laminate objects thicker than the recommended pouch thickness (125 microns).
- Avoid laminating heat-sensitive materials without proper testing.
- Yọọ laminator nigbati o ko ba wa ni lilo tabi ṣaaju ṣiṣe mimọ.
- Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn ọmọde.
- Ensure adequate ventilation around the machine during use.
Eto Itọsọna
- Yọ Laminator kuro: Fi ìṣọ́ra yọ laminator kúrò nínú àpò rẹ̀. Pa àpò mọ́ fún ìtọ́jú tàbí gbígbé.
- Ibi: Place the laminator on a stable, flat surface near a power outlet. Ensure there is enough space behind the machine for laminated documents to exit freely.
- So agbara: Pulọọgi okun agbara sinu iṣan itanna to dara.
- Agbara Tan: Locate the power switch, usually on the side or back of the machine, and turn it to the 'ON' position.
- Dara ya: The laminator will begin to warm up. The warm-up time is approximately 4 minutes. The ready indicator light (and possibly an audible signal) will activate when the machine is ready for use.

Image: The Fellowes Lunar A4 Laminator showing the power switch and ready indicators. The machine is white with a black control panel.
Awọn ilana Iṣiṣẹ
Once the laminator has warmed up and the ready indicator is active, you can begin laminating.
- Múra Ìwé: Place your document inside a laminating pouch. Ensure the document is centered and there is an even border around all edges.
- Fi Apo sii: Insert the sealed edge of the laminating pouch into the laminator's entry slot. The machine has a 240mm entry width, suitable for A4 documents.
- Lamination Process: The laminator will automatically feed the pouch through. Do not pull or push the pouch during this process.
- Gba Ìwé Àkọọ́lẹ̀: Once the laminated document exits the machine, place it on a flat surface to cool. Be cautious as the document may be warm.
- Itusilẹ Jam: In case of a misfeed or jam, activate the jam release feature (often a button or lever) to safely remove the pouch.

Aworan: A sunmọ-soke view of the laminator's entry slot, clearly showing the "Insert Sealed Edge First" instruction and size guides for A4, A5, A6 documents.
Itọju ati Itọju
- Ninu: Rii daju pe laminator ti yọọ kuro ati tutu patapata ṣaaju mimọ. Pa ode nu pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
- Roller Cleaning: Lojoojumọ, lo ìwé ìwẹ̀nùmọ́ laminator (tó wà lọ́tọ̀ọ̀tọ̀) láti yọ àwọn ohun tí ó kù lára àwọn rollers náà kúrò.
- Ibi ipamọ: Tọju laminator ni ibi ti o mọ, ibi gbigbẹ nigbati ko si ni lilo.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Laminator kò tan. | Ko edidi ni; pipa agbara; agbara otage. | Check power cord connection; ensure power switch is ON; check power supply. |
| Apo jams ninu ẹrọ. | Pouch inserted incorrectly (open end first); pouch too thick; document too large. | Use the jam release feature; ensure sealed edge is inserted first; use correct pouch thickness; ensure document fits pouch. |
| Ìwé tí a fi àwọ̀ ṣe tí ó ní ìkùukùu tàbí ó ń hó. | Temperature too low; pouch too thick for setting. | Allow more warm-up time; ensure correct pouch thickness is used. |
| Laminated document is wavy or curled. | Temperature too high; document not cooled flat. | Allow machine to cool slightly; place laminated document on a flat surface to cool. |
Awọn pato
- Brand: Awọn ẹlẹgbẹ
- Nọmba awoṣe: CRC 57156
- Laminator Type: Apo Laminator
- Àwọ̀: Funfun
- Isanra Apo ti o pọju: 125 microns
- Iwọn Iwọle: 240 mm (suitable for A4 documents)
- Akoko Igbagbona: O fẹrẹ to iṣẹju 4
- Iyara Lamination: 30 cm/minute (A4 document in approximately 1 minute)
- Awọn ẹya: Ready indicators (audible and visual), Jam release mechanism.
Atilẹyin ọja ati Support
This Fellowes product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Fellowes website. For technical support, spare parts, or service inquiries, please contact Fellowes customer service through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.