Antec NX260 ATX Gaming PC Case User Manual

1. Ifihan

The Antec NX260 is a mid-tower ATX gaming PC case designed to accommodate high-performance components. It features a fine mesh front panel for optimal airflow, a tempered glass side panel to showcase your build, and includes three 120mm ARGB fans for effective cooling and customizable lighting. This manual provides essential information for setting up, operating, and maintaining your NX260 case.

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan wa ninu package:

• Antec NX260 ATX Mid-Tower PC Case
• 3 x 120mm ARGB Fans (pre-installed in the front)
• Accessory Box (containing screws, standoffs, and cable ties)
• Afowoyi Olumulo (iwe-ipamọ yii)

3. Imọ ni pato

4. Eto ati fifi sori

4.1. Atokọ fifi sori ẹrọ tẹlẹ

• Ensure you have all necessary components (motherboard, CPU, GPU, PSU, storage, RAM).
• Gather essential tools: Phillips head screwdriver, cable ties (some included).
• Work on a clean, static-free surface.

4.2. Component Installation Guide

1. Yọ Awọn Paneli ẹgbẹ kuro: Carefully unscrew the tempered glass side panel and the solid steel side panel. Place them aside on a soft, flat surface to prevent scratches.
2. Fi sori ẹrọ modaboudu: Align your ATX or Micro ATX motherboard with the standoffs inside the case. Secure it with the provided screws.
3. Fi ẹrọ kuru Sipiyu sori ẹrọ: If using an air cooler, install it according to its manufacturer's instructions, ensuring it does not exceed the 160mm height limit. For liquid cooling, install the radiator (up to 360mm in front, 120mm in rear) and then the CPU block.
4. Fi Kaadi Awọn aworan sori ẹrọ (GPU): Insert your graphics card into the appropriate PCIe slot on your motherboard. Ensure it is securely seated and fastened with the expansion slot screws. The case supports GPUs up to 310mm in length.
5. Fi Awọn awakọ Ibi ipamọ sori ẹrọ:
   • For 3.5" HDDs or 2.5" SSDs: Use the convertible drive bays located in the PSU shroud area.
   • For 2.5" SSDs: Mount them on the dedicated SSD trays behind the motherboard tray.
6. Install Power Supply Unit (PSU): Mount your PSU in the bottom rear compartment of the case. Ensure the fan faces downwards (if the case has bottom ventilation) or upwards. Secure it with screws. The case supports PSUs up to 185mm in length with HDDs installed, or 310mm without HDDs.
7. So Awọn Cable Panel Iwaju: Connect the front panel I/O cables (Power, Reset, USB 3.0, USB 2.0, HD-AUDIO, LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for correct pin assignments.
8. Iṣakoso USB: Utilize the space behind the motherboard tray and the cable routing cutouts to neatly organize your cables. Use the included cable ties to secure them, improving airflow and aesthetics.
9. Reinstall Side Panels: Once all components are installed and cables are managed, carefully reattach both side panels.

5. Awọn ilana Iṣiṣẹ

5.1. Powering On Your System

After completing the installation and connecting all external peripherals (monitor, keyboard, mouse, power cable), press the power button located on the front I/O panel to start your computer.

5.2. ARGB Fan Control

The Antec NX260 includes three pre-installed 120mm ARGB fans in the front. These fans are controlled via a dedicated LED button on the front I/O panel.

• Yi Ipa Imọlẹ pada: Press the LED button briefly to cycle through various pre-set ARGB lighting modes and colors.
• Pa awọn ina: Press and hold the LED button for a few seconds to turn off the ARGB lighting. Repeat the action to turn them back on.

Akiyesi: The included ARGB fans use a proprietary connection and are controlled directly by the case's integrated controller. They may not be compatible with motherboard ARGB software synchronization without an additional adapter (not included).

6. Itọju

Itọju deedee n ṣe iranlọwọ lati rii daju pe iṣẹ ṣiṣe to dara julọ ati igba pipẹ ti apoti PC rẹ.

• Pipa eruku: Periodically clean the mesh front panel and any dust filters (if present) to maintain good airflow. Use compressed air or a soft brush to remove accumulated dust.
• Tempered Glass Panel: Clean the tempered glass side panel with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that could damage the glass or coating.
• Ninu inu: With the system powered off and unplugged, use compressed air to clear dust from internal components and fan blades.

7. Laasigbotitusita

If you encounter issues with your Antec NX260 case, consider the following:

• Àwọn Afẹ́fẹ́ Tí Kò Ń Yí/Tí Ń Tan Ìmọ́lẹ̀:
  • Check if the fan power cables are securely connected to the case's fan controller or motherboard headers.
  • Ensure the SATA power connector for the fan controller is connected to your PSU.
  • Verify that the LED button is not in the 'off' state (press it briefly or hold to cycle modes).
• Awọn ibudo USB iwaju ko ṣiṣẹ:
  • Ensure the USB 3.0 and USB 2.0 headers from the front panel are correctly connected to your motherboard. Refer to your motherboard manual for correct pin orientation.
• Front Audio Jacks Not Working:
  • Verify that the HD-AUDIO cable from the front panel is correctly connected to the audio header on your motherboard.
  • Check your operating system's audio settings and drivers.
• Bọtini Agbara Ko Dahun:
  • Ensure the power switch cable from the front panel is correctly connected to the power header on your motherboard.

8. Atilẹyin ọja ati Support

8.1. atilẹyin ọja Information

The Antec NX260 PC case comes with a manufacturer's warranty. For specific details regarding warranty duration and coverage in your region, please refer to the warranty card included with your product or visit the official Antec website. Spare parts availability in the EU is guaranteed for 2 years from the date of purchase.

8.2. Imọ Support

For technical assistance, troubleshooting beyond this manual, or inquiries about replacement parts, please contact Antec customer support through their official website. Have your product model (NX260) and proof of purchase ready when contacting support.