DEWENWILS 3-Outlet Automatic Watering Timer

Ọrọ Iṣaaju

Thank you for choosing the DEWENWILS 3-Outlet Automatic Watering Timer. This device is designed to simplify your garden and lawn irrigation, offering independent control for up to three zones with flexible programming options. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.

Alaye Aabo

• This watering timer is designed for outdoor use with cold water only.
• Ma ṣe fi ọja naa sinu omi.
• Rii daju pe gbogbo awọn asopọ ti wa ni ṣinṣin lati ṣe idiwọ awọn n jo.
• Use only 2 AA 1.5V alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Remove batteries if the unit will not be used for an extended period or during freezing temperatures.
• Jeki kuro ni arọwọto awọn ọmọde.

Ọja Pariview

The DEWENWILS watering timer features a durable ABS plastic shell, a large LCD display, and intuitive controls for easy programming. It supports three independent watering zones.

Akọkọ view of the DEWENWILS 3-Outlet Automatic Watering Timer, showing the LCD screen and three output valves.

Awọn eroja pataki:

• Ifihan LCD: 3.4-inch screen showing time, watering status, and program details.
• Awọn bọtini Iṣakoso: 5 buttons (OK, Arrow Up, Arrow Down, Left, Right) for navigation and setting adjustments.
• Faucet Connector: Standard 3/4-inch inlet for connecting to a water tap.
• Water Outlets (A, B, C): Three independent outlets for connecting hoses to different irrigation zones.
• Abala Batiri: Located at the back, requires 2 AA 1.5V batteries.

Alaye view of the large LCD screen and the 5 control buttons for easy programming.

Ṣeto

1. Fifi sori batiri

1. Wa yara batiri ni ẹhin aago.
2. Gbe ideri batiri kuro.
3. Insert 2 new AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
4. Replace the battery cover securely. The timer will power on and display the current time setting.

Close-up of the battery compartment, showing the spring contacts and seal.

2. Connecting to Faucet

1. Rii daju pe faucet ti wa ni pipa.
2. Screw the timer's inlet connector onto a standard 3/4-inch outdoor faucet. Hand-tighten firmly to prevent leaks. Do not overtighten.
3. A filter washer is pre-installed in the inlet to prevent debris from entering the timer. Ensure it is properly seated.

Detail of the integrated filter mesh within the faucet connector.

3. Nsopọ Hoses

1. Connect your garden hoses to the three independent outlets (A, B, C) at the bottom of the timer.
2. Ensure these connections are also tight to prevent leaks.

Visual guide showing the three steps for installing the watering timer: battery insertion, connecting to faucet, and attaching hoses.

Awọn ilana Iṣiṣẹ

The timer features a user-friendly interface with a large LCD and 5 control buttons. The blinking cursor on the screen indicates the current setting being adjusted.

1. Eto Lọwọlọwọ Time

1. Press the 'OK' button to enter the setting mode. The 'TIME' indicator will blink.
2. Use the 'Up' and 'Down' arrows to adjust the hour, then press 'OK'.
3. Adjust the minutes, then press 'OK'.
4. Adjust the day of the week, then press 'OK' to confirm.

2. Programming Watering Schedules (4 Programs per Zone)

Each of the three outlets (A, B, C) can be programmed independently with up to 4 watering cycles. The programming steps are identical for each zone.

Illustration of the three independent watering zones (A, B, C) with customizable start times and durations.

1. Yan Agbegbe: Use the 'Left' or 'Right' arrow buttons to select the desired zone (A, B, or C) you wish to program. The selected zone will blink. Press 'OK'.
2. Select Water Cycle: Use 'Up' or 'Down' to select one of the 4 available water cycles (1, 2, 3, 4) for the chosen zone. Press 'OK'.
3. Ṣeto Akoko Ibẹrẹ: The 'START TIME' indicator will blink. Use 'Up' or 'Down' to set the desired start hour, then 'OK'. Repeat for minutes, then 'OK'.
4. Ṣètò Àkókò Tí A Fi Agbe Omi: The 'HOW LONG' indicator will blink. Use 'Up' or 'Down' to set the watering duration from 1 to 240 minutes. Press 'OK'.
5. Set Watering Frequency (Water Day): The 'WATER DAY' indicator will blink. You can choose from:
• Specific days of the week (SU, MO, TU, WE, TH, FR, SA)
• Every 2nd day
• Every 3rd day

Use 'Up' or 'Down' to navigate and 'OK' to select/deselect days or frequency. Press 'OK' to confirm the frequency setting.

6. Set ECO Function (Repeat Irrigation Mode): The 'ECO FUNCTION' indicator will blink. This mode allows for intermittent watering (e.g., ON 5 minutes, OFF 15 minutes) within a set period.
• Use 'Up' or 'Down' to set the 'WATER' duration (e.g., 5 minutes). Press 'OK'.
• Use 'Up' or 'Down' to set the 'PAUSE' duration (e.g., 15 minutes). Press 'OK'.
• To disable ECO function, set both WATER and PAUSE to 0.

Visual representation of the four customizable watering programs per zone, allowing for diverse irrigation schedules.


Diagram illustrating the Eco Function for intermittent watering, the Rain Delay feature, and the Manual Watering mode.

7. Save Program: After setting all parameters for a cycle, the timer will automatically save the settings and return to the main display. Repeat for other cycles and zones as needed.

3. Afowoyi agbe

The manual watering mode allows you to water immediately without interrupting your programmed schedule.

1. From the main screen, press the 'Right' arrow button to select the desired zone (A, B, or C) for manual watering.
2. Press the 'Up' arrow button. The 'MANUAL' indicator will appear.
3. Use 'Up' or 'Down' to set the desired manual watering duration (e.g., 10 minutes).
4. Press 'OK' to start manual watering. The timer will count down the duration.
5. To stop manual watering early, press 'OK' again. The timer will return to automatic mode.

4. Ojo Idaduro Išė

The rain delay function allows you to pause your watering schedule for a set period, preventing overwatering after rainfall.

1. From the main screen, press the 'Left' arrow button. The 'DELAY' indicator will appear.
2. Use 'Up' or 'Down' to set the desired delay duration (e.g., 24 hours, 48 hours, up to 6 days).
3. Press 'OK' to activate the rain delay. The timer will pause all programmed watering for the selected duration.
4. To cancel the rain delay, press 'OK' again. The timer will resume its normal schedule.

Itoju

Ninu

• Clean the exterior of the timer with a soft, damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Regularly check and clean the filter washer in the inlet to prevent blockages.

Batiri Rirọpo

The timer features a low battery indicator on the LCD screen. When the battery icon appears or blinks, replace the batteries promptly. The timer is designed to retain programmed settings even when batteries are depleted or removed, but it's recommended to replace them as soon as the indicator appears.

Ibi ipamọ igba otutu

Before the first frost, disconnect the timer from the faucet and hoses. Remove the batteries. Store the timer in a dry, frost-free location to prevent damage from freezing water.

Laasigbotitusita

Awọn pato

• Awoṣe: DHDWT03A
• Ohun elo: Acrylonitrile Butadiene Styrene (ABS)
• Àwọ̀: Dudu
• Awọn iwọn ọja: 17.4 cm (Ijinle) x 16.8 cm (Iwọn) x 10.4 cm (Iga)
• Iwọn iboju: 3.4 inches
• Nọmba awọn iÿë: 3 ominira
• Programs per Zone: 4
• Iye akoko agbe: 1 to 240 iṣẹju
• Iwọn Omi ti o pọju: 120psi
• Orisun Agbara: Batiri Alkaline 2 x AA 1.5V (kò sí nínú rẹ̀)
• Olupese: DEWENWILS

Image displaying the timer's screen with various settings, including watering duration and frequency, alongside maximum water pressure and low battery warning indicators.

Atilẹyin ọja ati Support

DEWENWILS products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official DEWENWILS website. Please have your model number (DHDWT03A) ready when contacting support.