1. Ọja Ipariview
This set of three LEXMAN G9 LED bulbs provides efficient and high-quality lighting for various indoor spaces. Designed for compatibility with G9 lamp holders, these bulbs offer a bright 470 lumens output with a low power consumption of 4.2W, equivalent to a traditional 40W incandescent bulb. The 4000K neutral white light provides a dynamic, daylight-like illumination, ensuring optimal visual comfort and clarity. These bulbs are designed for quick illumination, reaching 95% intensity in less than 1 second, and boast a long lifespan of 15,000 hours, contributing to energy savings.
Image 1.1: LEXMAN G9 LED Bulb Set. This image displays the three G9 LED bulbs, highlighting their compact design and the G9 base type.
2. Alaye Aabo
Please read and understand all safety instructions before installing or using the bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Pa agbara: Always disconnect power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Mimu to tọ: Do not touch the bulb with wet hands. Avoid touching the glass part of the bulb directly after use, as it may be hot.
- Lilo ile nikan: These bulbs are designed for indoor use in dry locations. Do not expose to water or excessive moisture.
- Compatible fixtures: Use only in fixtures rated for G9 base type and within the specified voltage ibiti (230V).
- Ibamu dimmer: These bulbs are not specified as dimmable. Using them with a dimmer switch may cause flickering or damage.
- Idasonu: Sọ awọn isubu ti a lo ni ibamu si awọn ilana agbegbe.
3. Package Awọn akoonu
Your LEXMAN G9 LED Bulb Set package includes:
- 3 x LEXMAN G9 LED Bulbs (4.2W, 4000K)
Image 3.1: Packaging of the LEXMAN G9 LED Bulb Set. The image shows the retail packaging containing three G9 LED bulbs, along with key specifications like 4000K color temperature, 470 lumens, and 4.2W power consumption.
4. fifi sori
Follow these steps to install your LEXMAN G9 LED bulbs:
- Ensure power is off: Before beginning installation, always turn off the power supply to the light fixture at the main circuit breaker or fuse box.
- Gba laaye lati tutu: Ti o ba rọpo boolubu atijọ, jẹ ki o tutu patapata ṣaaju mimu.
- Remove old bulb (if applicable): Gently pull the old G9 bulb straight out from its socket. Do not twist.
- Insert new bulb: Align the two pins of the new LEXMAN G9 LED bulb with the holes in the G9 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
- Mu agbara pada: Ni kete ti boolubu ti fi sii ni aabo, mu agbara pada si imuduro ni fifọ Circuit.
- Idanwo: Tan ina yipada lati jẹrisi boolubu n ṣiṣẹ ni deede.
Image 4.1: G9 Bulb Dimensions. This diagram illustrates the physical dimensions of a G9 bulb, showing a width of 16mm and a length of 55.5mm, which is important for ensuring compatibility with your fixture.
5. Isẹ
Operating your LEXMAN G9 LED bulbs is straightforward:
- Once installed, simply use the light switch connected to your fixture to turn the bulbs on or off.
- These LED bulbs provide instant full brightness (95% intensity in less than 1 second) without any warm-up time.
- The 4000K neutral white light is ideal for areas requiring clear, dynamic illumination similar to natural daylight.
6. Itọju
LEXMAN G9 LED bulbs require minimal maintenance:
- Ninu: Rí i dájú pé agbára náà ti pa àti pé gílóòbù náà tutù kí o tó fọ gílóòbù náà. Fi aṣọ rírọrùn, gbígbẹ, nu gílóòbù náà pẹ̀lú ìrọ̀rùn. Má ṣe lo àwọn ohun èlò ìfọmọ́ omi tàbí àwọn ohun èlò ìpara.
- Rọpo: Due to their long lifespan of 15,000 hours, frequent replacement is not expected. When replacement is necessary, follow the installation steps outlined in Section 4.
7. Laasigbotitusita
If you encounter issues with your LEXMAN G9 LED bulbs, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Boolubu ko ni tan imọlẹ | No power to the fixture; Bulb not properly seated; Faulty bulb | Check circuit breaker/fuse; Ensure bulb is fully inserted; Try another bulb to confirm fixture functionality. |
| Boolubu flickers | Switi dimmer tí kò báramu; Ìsopọ̀ tí kò dọ́gba; Voltage awọn iyipada | Ensure no dimmer switch is used (unless specified as dimmable); Re-seat the bulb; Consult an electrician for voltage oran. |
| Ina ti wa ni baìbai tabi ju imọlẹ | Incorrect bulb type for desired brightness | Verify the bulb's luminous flux (470 lm) and color temperature (4000K) meet your lighting needs. |
8. Awọn pato
| Brand | LEXMAN |
| Olupese | ADEO |
| Nọmba awoṣe | 3276007280982 |
| Opoiye | 3 bulbs |
| Awọn iwọn Ọja (L x W x H) | 2 x 16 x 6 cm |
| Iwọn | 40 giramu |
| Ara | G9 |
| Voltage | 230 Volts |
| Boolubu Iru | LED |
| fila Iru | G9 |
| Flux Imọlẹ | 470 lumens (lm) |
| Agbara agbara | 4.2 Wattis |
| Okan Daradara | 40 Wattis |
| Iwọn otutu awọ | Kelvin 4000 (Fúlú Àìlágbára) |
| Apapọ Igbesi aye | 15,000 hours (approx. 13 years based on 3 hours/day use) |
| Pataki Awọn ẹya ara ẹrọ | Instant full brightness |
9. Atilẹyin ọja ati Support
LEXMAN products are designed for safety, durability, and intelligence. This product comes with a 5-odun lopolopo, ní ìdánilójú iṣẹ́ tó ṣeé gbẹ́kẹ̀lé àti àlàáfíà ọkàn.
For further assistance or inquiries, please refer to the LEXMAN official webojula tabi kan si alagbata rẹ.
Image 9.1: LEXMAN G9 LED Bulb Set. This image shows the three G9 LED bulbs out of their packaging, highlighting their clear, neutral white light output.
