Legrand Rotative Power Strip with LED Switch - 3 Earthed Outlets (Cordless)

Ọrọ Iṣaaju

This manual provides essential information for the safe and efficient use of your Legrand Rotative Power Strip, Model 49464. This power strip features three earthed outlets, an LED indicator switch, and a unique rotating design for flexible power distribution. It is supplied without a cord and requires manual wiring.

Awọn Itọsọna Aabo

Always disconnect the power strip from the main power supply before performing any wiring or maintenance.
Ensure that the total power consumption of connected devices does not exceed the maximum rating of 16A / 230V.
This product is designed for indoor use only. Avoid exposure to moisture, water, or extreme temperatures.
Do not open or modify the power strip. Repairs should only be performed by qualified personnel.
Jeki kuro ni arọwọto awọn ọmọde.
Ensure proper grounding when wiring the power strip.

Package Awọn akoonu

1 x Legrand Rotative Power Strip Housing (Model 49464)

Note: Power cord and fixing screws/collars are not included and must be purchased separately.

Ṣíṣeto ati Waya

Ṣetan USB naa: Obtain a 3G 1.5 mm² power cable of the desired length. Strip the outer insulation and individual wire insulation (Live, Neutral, Earth) according to standard electrical practices.
Ṣii Ile naa: Carefully open the power strip housing to access the internal wiring terminals. Refer to the diagram below for guidance.
Nọmba 1: Akọkọ view of the Legrand Rotative Power Strip. This image shows the overall design with three earthed sockets and the integrated LED switch.
So awọn Wires pọ: Connect the Live, Neutral, and Earth wires from your power cable to the corresponding terminals inside the power strip. Ensure all connections are secure and properly insulated.
Figure 2: Close-up of the earthed sockets. This image highlights the Type E sockets with their grounding pins and electrical ratings.
Close the Housing: Carefully reassemble the power strip housing, ensuring no wires are pinched.
Awọn aṣayan iṣagbesori: The power strip offers flexible installation:
- Ominira: Place the power strip on a flat surface. The integrated feet provide stability.
- Iṣagbede ogiri: Use appropriate screws (not supplied) to fix the power strip to a wall. The design allows for secure attachment.
- Cable Tie Mounting: Secure the power strip using cable ties (not supplied) for temporary or flexible installations.
olusin 3: Apa view of the power strip with feet extended, illustrating its freestanding capability and potential for mounting.
olusin 4: Iwaju view of the power strip with feet extended, showing the overall form factor when placed on a surface.

Awọn ilana Iṣiṣẹ

Nsopọ si Agbara: Plug the wired power strip into a suitable wall outlet.
Titan / Pipa: Use the integrated LED switch to turn the power strip on or off. The LED indicator will illuminate when the power strip is active.
Awọn ẹrọ Asopọmọra: Plug your electrical devices into the three earthed outlets. The sockets are oriented at 45° for standard plugs and one at 90° for larger transformers, optimizing space and preventing blockage.
Apẹrẹ Yiyi: The cylindrical design allows you to rotate the power strip to orient the outlets as needed, providing flexibility for various plug types and cable management.
Retractable Sockets: When not in use, the sockets can be retracted to prevent dust accumulation.

Itoju

Ninu: Disconnect the power strip from the main power supply before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
Ayewo: Periodically inspect the power strip and its connected cable for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately and consult a qualified electrician.
Idaabobo eruku: Utilize the retractable socket feature to minimize dust accumulation when outlets are not in use.

Laasigbotitusita

Isoro	Owun to le Fa	Ojutu
Power strip does not turn on (LED off).	No power from wall outlet, faulty wiring, or internal issue.	Ṣayẹwo boya iṣan ogiri jẹ iṣẹ-ṣiṣe nipasẹ pilogi sinu ẹrọ miiran. Verify the internal wiring connections (if recently wired). Ensure the power strip's switch is in the "ON" position.
Devices connected are not receiving power.	Power strip is off, device is faulty, or overloaded circuit.	Ensure the power strip is switched on (LED illuminated). Test the device by plugging it directly into a wall outlet. Reduce the number of connected devices to avoid overloading the power strip or circuit.
Overheating of the power strip.	Overload, poor ventilation, or internal fault.	Immediately disconnect all devices and unplug the power strip. Ensure total power consumption does not exceed 16A. Place the power strip in a well-ventilated area. If overheating persists, discontinue use and seek professional assistance.

Awọn pato

Ẹya ara ẹrọ	Ẹ̀kúnrẹ́rẹ́
Nọmba awoṣe	49464
Brand	Legrand
Nọmba ti iÿë	3 (Type E, Earthed)
Voltage	230 Volts
O pọju Lọwọlọwọ	16 Amperes
Pataki Awọn ẹya ara ẹrọ	Rotative design, LED indicator switch, Retractable sockets, 45°/90° oriented sockets
Ohun elo	Ṣiṣu
Àwọ̀	White and Dark Grey
Okun	Not supplied (requires 3G 1.5 mm² cable)
Smart Home ibamu	Rara
Iṣeduro Lilo	Indoor settings, workspaces
Ilu isenbale	China

Atilẹyin ọja ati Support

This Legrand product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Legrand webojula.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Legrand customer service through their official channels. Contact information can typically be found on the product packaging or the Legrand webojula.

Legrand Official Webojula: www.legrand.com

Legrand 49464