LEDVANCE Linear LED Shelf Light 400mm

1. Ifihan

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Jọwọ ka iwe afọwọkọ yii daradara ṣaaju fifi sori ẹrọ ati da duro fun itọkasi ọjọ iwaju.

2. Awọn ilana aabo

• Aabo Itanna: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Lilo ti a pinnu: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Idiwon IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Orisun Imọlẹ: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Mimu: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Ninu: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Awọn ẹya ẹrọ asopọ

4. Awọn pato

Akiyesi: Awọn alaye ni o wa labẹ iyipada laisi akiyesi.

5. Eto ati fifi sori

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Mura agbegbe fifi sori ẹrọ: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Ge Agbara: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Samisi Awọn aaye Liluho: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Awọn iho iho: Lílo ohun èlò ìdábùú tó yẹ fún ohun èlò ògiri rẹ láti fi lu ihò ní àwọn ibi tí a sàmì sí. Fi àwọn páálí ògiri tí a pèsè sínú àwọn ihò tí a gbẹ́.
5. So Awọn Biraketi Iṣagbesori: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Asopọmọra itanna: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Gbe Imuduro: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Pada Agbara pada: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Awọn ilana Iṣiṣẹ

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Isẹ aladaaṣe: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Tiipa aifọwọyi: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Ibi sensọ: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Itọju

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Ninu: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp Aṣọ. Má ṣe lo àwọn kẹ́míkà líle, àwọn ohun ìfọmọ́ra, tàbí àwọn ohun ìfọ́nrán tààrà lórí ohun èlò náà.
• Ayewo: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Orisun Imọlẹ: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Laasigbotitusita

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Ìmọ́lẹ̀ kìí tan:
  • Ṣàyẹ̀wò bóyá agbára náà ti so pọ̀ mọ́ra àti pé ẹ̀rọ ìfọ́mọ́ra náà ti wà nílẹ̀.
  • Rii daju pe awọn asopọ onirin wa ni aabo.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Light Stays On Continuously:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Rii daju voltage supply is stable and within the specified range (240V).

Tí àwọn ìgbésẹ̀ wọ̀nyí kò bá yanjú ìṣòro náà, kan si ìrànlọ́wọ́ oníbàárà.

9. Atilẹyin ọja ati Support

This LEDVANCE Linear LED Shelf Light comes with a 2-odun lopolopo lati ọjọ ti o ra, ibora awọn abawọn ninu awọn ohun elo ati iṣẹ-ṣiṣe labẹ lilo deede.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.