AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Ọja Ipariview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Awọn ẹya pataki:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Awọn pato

3. Eto Itọsọna

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Ṣiṣii silẹ

1. Fi ìṣọ́ra yọ àpótí PC náà kúrò nínú àpótí rẹ̀.
2. Remove any protective films or internal packaging materials.
3. Gbe ọran naa sori iduro, dada alapin.

3.2 Fifi sori modaboudu

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Ṣe aabo modaboudu nipa lilo awọn skru ti a pese.

3.3 Fifi sori ẹrọ Ipese Agbara

1. Wa agbegbe ti a fi sori ẹrọ ipese agbara ni isalẹ ẹhin apoti naa.
2. Slide your power supply unit (PSU) into the designated bay.
3. Ṣe aabo PSU pẹlu awọn skru lati ẹhin ọran naa.

3.4 Ibi ipamọ wakọ sori

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

Fifi sori ẹrọ Kaadi Imugboroosi 3.5 (GPU)

1. Yọ awọn ideri aaye imugboroosi pataki kuro ni ẹhin apoti naa.
2. Fi kaadi eya aworan rẹ tabi awọn kaadi imugboroosi miiran sinu awọn iho PCIe lori modaboudu rẹ.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 itutu System

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 USB Management

Lo àwọn ohun tí a gé síta àti àwọn ibi tí a ti so mọ́ ara wọn lẹ́yìn àwo módàbù láti ṣètò àwọn wáyà. Èyí mú kí afẹ́fẹ́ àti ẹwà wọn sunwọ̀n síi.

4. Awọn ilana Iṣiṣẹ

4.1 Titan / Pa a

• To power on your PC, press the Agbara button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Agbara bọtini fun kan diẹ aaya.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Ibudo USB 3.0 (x1): Fun ga-iyara data gbigbe.
• Awọn ibudo USB 2.0 (x2): Fun sisopọ awọn agbeegbe.
• Gbohungbohun Jack: Fun igbewọle ohun.
• HD Audio Jack: For audio output (headphones/speakers).
• Bọtini atunto: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Itọju

Itọju deedee n ṣe iranlọwọ lati rii daju pe iṣẹ ṣiṣe to dara julọ ati igba pipẹ ti awọn paati PC rẹ.

5.1 eruku Filter Cleaning

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Gbogbogbo Cleaning

• Nu ita apoti naa pẹlu asọ rirọ, damp asọ. Yago fun abrasive ose.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Laasigbotitusita

Tí o bá ní ìṣòro pẹ̀lú àpótí PC rẹ, ronú nípa àwọn ìgbésẹ̀ àtúnṣe tí ó wọ́pọ̀ wọ̀nyí:

• Ko si Agbara: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Awọn onijakidijagan Ko Yiyi/RGB Ko Ṣiṣẹ: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Igbóná púpọ̀: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Awọn ibudo iwaju paneli ko ṣiṣẹ: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Atilẹyin ọja ati Support

7.1 atilẹyin ọja Alaye

The AeroCool HEXFORMBKV2 PC case comes with a 2-odun atilẹyin ọja for parts. Please retain your proof of purchase for warranty claims.

7.2 Imọ Support

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webaaye tabi ni apoti ọja.

• Oṣiṣẹ AeroCool Webojula: www.aerocool.io
• Imeeli Atilẹyin Onibara: support@aerocool.io (Eksample, please verify on official webaaye)