Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your Yeelight Closet Light YLBGD-0045. This motion sensor wardrobe light is designed to provide convenient and efficient illumination in various indoor spaces. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Package Awọn akoonu
Jẹrisi pe gbogbo awọn paati wa ninu package:
- Yeelight Closet Light (1 unit)
- Mounting accessories (e.g., magnetic strips, adhesive pads)
- USB Iru-C gbigba agbara USB
- Itọsọna olumulo
Note: The product is typically supplied as a single package containing the light and necessary accessories.
Eto ati fifi sori
The Yeelight Closet Light features a magnetic design for easy installation and removal, particularly for charging.
- Yan Ibi: Select a clean, dry, and flat surface for installation, such as inside a wardrobe, under kitchen cabinets, or on a bookshelf.
- Mura Ilẹ: Clean the chosen surface thoroughly to ensure optimal adhesion for the magnetic pads.
- So awọn paadi oofa: Peel off the protective film from one side of the adhesive magnetic pads and firmly press them onto the desired installation surface.
- Imọlẹ Oke: Align the magnetic back of the Yeelight Closet Light with the installed magnetic pads. The light will securely attach magnetically.
- Idiyele Ibẹrẹ: Before first use, fully charge the light using the provided USB Type-C cable. The charging indicator will be red during charging and turn off when fully charged.
Image: Magnetic installation of the Yeelight Closet Light. The light can be easily removed for charging.
Image: The Type-C charging port and indicator light. Red indicates charging, light off indicates full charge.
Awọn ilana Iṣiṣẹ
The Yeelight Closet Light offers multiple operating modes and adjustable brightness.
Aṣayan Ipo
Locate the mode switch on the light. Typically, there are three modes:
- AUTO Mode (Motion Sensor): In this mode, the light automatically turns on when motion is detected in a dark environment and turns off after a period of no motion (e.g., 20 seconds). The motion sensor has a detection range of approximately 120 degrees and up to 13 feet.
- Always-ON Mode: The light remains continuously on, regardless of motion or ambient light.
- Ipo PA: Ina ti wa ni pipa.
Image: Illustration of the automatic motion sensor light in action, detecting motion within a 120-degree angle and up to 13 feet.
Stepless Dimming
In Always-ON Mode, you can adjust the brightness of the light:
- Ṣatunṣe Imọlẹ: Long press the control button to cycle through brightness levels. Release the button when the desired brightness is achieved.
Image: Demonstrates stepless dimming capability, showing the light at various brightness levels (20%, 50%, 100%).
Itoju
Proper maintenance ensures the longevity and optimal performance of your Yeelight Closet Light.
- Ninu: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
- Itọju Batiri: To prolong battery life, avoid fully discharging the light frequently. Recharge the light when the indicator shows low battery.
- Ibi ipamọ: If storing the light for an extended period, charge it to approximately 50% and store in a cool, dry place. Recharge every few months to prevent deep discharge.
- Adhesive Pads: If the adhesive pads lose their stickiness over time, replace them with new double-sided adhesive tape suitable for the application.
Laasigbotitusita
If you encounter issues with your Yeelight Closet Light, refer to the following common solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ìmọ́lẹ̀ kìí tan ní ipò AUTO. | Insufficient darkness; battery low; motion not detected; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the light. Check if the sensor is clean and unobstructed. Verify motion is within detection range. |
| Ina ko gba agbara. | Faulty cable; faulty adapter; charging port issue; battery degradation. | Try a different USB Type-C cable and power adapter. Ensure the cable is fully inserted. If the issue persists, the battery may be degraded (refer to warranty). |
| Light falls off mounting surface. | Adhesive pads lost stickiness; surface not clean. | Clean the mounting surface thoroughly. Replace the adhesive pads with new, strong double-sided tape. |
| Imọlẹ ko le ṣe atunṣe. | Not in Always-ON mode. | Ensure the light is switched to Always-ON mode before attempting to adjust brightness via long press. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | YLBGD-0045 |
| Brand | Yeelight |
| Àwọ̀ | Dudu |
| Light Awọ otutu | 4000 K (Aláwọ̀ Aláìdádúró) |
| Gigun | 40 cm |
| Nọmba Awọn orisun Imọlẹ | 1 |
| Iwọn Nkan | 8.78 iwon (isunmọ 249 giramu) |
| Orisun agbara | Gbigba agbara (USB Iru-C) |
| Ibi sensọ išipopada | Approx. 120 degrees, up to 13 feet |
| Apejọ ti a beere | Yes (minor, mounting) |
Alaye atilẹyin ọja
The Yeelight Closet Light YLBGD-0045 comes with a manufacturer's warranty.
- Akoko atilẹyin ọja: 2-odun olupese atilẹyin ọja.
- Ibo: Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede.
- Awọn iyọkuro: Atilẹyin ọja naa ko bo ibajẹ ti o fa nipasẹ ilokulo, ijamba, iyipada laigba aṣẹ, tabi ibajẹ deede.
- Ilana ẹtọ: For warranty claims, please retain your proof of purchase and contact the retailer or Yeelight customer support.
Atilẹyin
For further assistance or inquiries not covered in this manual, please refer to the following:
- Awọn orisun Ayelujara: Visit the official Yeelight webojú òpó wẹ́ẹ̀bù fún àwọn ìbéèrè tó ń wáyé nígbà gbogbo, àwọn àtúnṣe ọjà, àti àwọn ìwé àtìlẹ́yìn afikún.
- Iṣẹ onibara: Contact Yeelight customer support through their official channels if you require technical assistance or have specific product-related questions.