Auriol AU788

Auriol Wireless Weather Station

Awoṣe: AU788

1. Ifihan

Thank you for choosing the Auriol Wireless Weather Station. This device provides accurate indoor and outdoor temperature readings, displays the date and day of the week, and includes a radio-controlled clock with two adjustable alarm times and a frost warning function. This manual will guide you through the setup, operation, and maintenance of your new weather station.

Jọwọ ka awọn ilana wọnyi ni pẹkipẹki ṣaaju lilo akọkọ ki o tọju wọn fun itọkasi ọjọ iwaju.

2. Alaye Aabo

  • Do not expose the main unit to direct sunlight, extreme temperatures, or high humidity.
  • The outdoor sensor is splash-proof (IPX4) but should not be submerged in water.
  • Use only the specified battery type and ensure correct polarity.
  • Jeki awọn batiri kuro ni arọwọto awọn ọmọde.
  • Ma ṣe gbiyanju lati tunto tabi tun ẹrọ naa funrararẹ. Kan si oṣiṣẹ ti o peye fun iṣẹ.
  • Dispose of batteries and the device according to local environmental regulations.

3. Package Awọn akoonu

Jọwọ ṣayẹwo package fun awọn nkan wọnyi:

  • 1 x Auriol Wireless Weather Station (Main Unit)
  • 1 x Sensọ Ita gbangba Alailowaya
  • 4 x Alkaline Batteries
  • 1 x Itọsọna olumulo
  • Ohun elo iṣagbesori

4. Ọja Ipariview

Auriol Wireless Weather Station main unit and outdoor sensor

Apejuwe aworan: This image displays the Auriol Wireless Weather Station. On the right is the main display unit, a black rectangular device with a large digital screen showing indoor temperature (23.3°C), date (29 5 FR), outdoor temperature (25.2°C), current time (20:15:59), and two alarm settings (6:00 and 7:00). Below the screen are four buttons: 'SET', '+', 'MODE', and '-'. On the left is the wireless outdoor sensor, a smaller black rectangular unit, also displaying a temperature (23.3°C) on its small screen.

Main Unit (Front View):

  • Ifihan: Shows indoor/outdoor temperature, time, date, day of week, alarm settings.
  • Ṣeto Bọtini: Enters setting mode for time, date, and alarms.
  • Bọtini: Increases values or navigates options in setting mode.
  • Bọtini MODE: Switches between display modes (e.g., time, alarm).
  • - Bọtini: Decreases values or navigates options in setting mode.

Sensọ ita gbangba alailowaya:

  • Ifihan: Shows current outdoor temperature.
  • Abala Batiri: Located on the back.
  • Iho iṣagbesori: Fun iṣagbesori odi.

5. Eto

5.1 Fifi sori batiri

  1. Ẹka akọkọ: Open the battery compartment on the back of the main unit. Insert the specified alkaline batteries (e.g., 2x AA or AAA, refer to the compartment markings) ensuring correct polarity (+/-). Close the compartment.
  2. Sensọ ita gbangba: Open the battery compartment on the back of the outdoor sensor. Insert the specified alkaline batteries (e.g., 2x AA or AAA) ensuring correct polarity (+/-). Close the compartment.

5.2 Amuṣiṣẹpọ akọkọ

After inserting batteries, the main unit will automatically attempt to connect with the outdoor sensor and receive the radio-controlled time signal. This process may take a few minutes.

  • Place the outdoor sensor within range (up to 100m in open field) of the main unit.
  • Ensure there are no major obstructions (e.g., thick walls, large metal objects) between the units that could interfere with the signal.
  • The outdoor temperature should appear on the main unit's display once connected.

5.3 Ibi

  • Ẹka akọkọ: Can be placed on a flat surface using its integrated stand or wall-mounted using the hanging hole on the back. Place it indoors, away from direct heat sources or air conditioning vents.
  • Sensọ ita gbangba: Can be placed on a flat surface or wall-mounted. For accurate readings, place it in a shaded area, protected from direct rain and sunlight. While splash-proof, excessive exposure to harsh weather conditions should be avoided.

6. Awọn ilana Iṣiṣẹ

6.1 Eto Aago ati Ọjọ

  1. Tẹ mọlẹ SET bọtini titi ti ifihan akoko yoo fi bẹrẹ si ni imọlẹ.
  2. Lo awọn + or - awọn bọtini lati ṣatunṣe awọn wakati. Tẹ SET lati jẹrisi ati gbe si awọn iṣẹju.
  3. Tún ṣe é fún ìṣẹ́jú, ọdún, oṣù, àti ọjọ́.
  4. Tẹ SET to exit the setting mode. The radio-controlled time will automatically update if a signal is received.

6.2 Ṣíṣeto Awọn Itaniji (Alarm 1 & Itaniji 2)

  1. Tẹ awọn MODE button repeatedly until "ALARM 1" or "ALARM 2" is displayed.
  2. Tẹ mọlẹ SET bọtini titi ti akoko itaniji yoo bẹrẹ ìmọlẹ.
  3. Lo awọn + or - awọn bọtini lati ṣatunṣe aago itaniji. Tẹ SET lati jẹrisi ati gbe si awọn iṣẹju.
  4. Repeat for minutes. Press SET lati jade.
  5. Lati mu itaniji ṣiṣẹ/mu maṣiṣẹ, tẹ awọn MODE button while the alarm time is displayed. An alarm icon will appear/disappear.

6.3 otutu Ifihan

  • The main unit displays both indoor ("IN") and outdoor ("OUT") temperatures simultaneously.
  • To switch between Celsius (°C) and Fahrenheit (°F), locate the °C/°F switch on the back of the main unit (if available) or press a specific button (refer to on-screen prompts or detailed manual if not obvious).

6.4 Frost Warning Function

The weather station features a frost warning function. When the outdoor temperature drops to a certain threshold (typically around 0°C / 32°F), a frost warning icon will appear on the display to alert you to potential icy conditions.

6.5 Manual Radio Signal Deactivation

In some environments, radio signal interference might occur. If desired, the radio signal reception can be manually deactivated. Refer to the detailed manual for specific button combinations or settings to perform this action.

7. Itọju

  • Ninu: Wipe the main unit and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Rirọpo Batiri: Replace batteries in both units when the low battery indicator appears on the display. Always replace all batteries at the same time.
  • Ti ẹrọ naa ko ba ni lo fun akoko ti o gbooro sii, yọ awọn batiri kuro lati yago fun jijo.

8. Laasigbotitusita

IsoroOwun to le FaOjutu
No outdoor temperature display / Signal loss
  • Awọn batiri inu sensọ ti lọ silẹ tabi fi sii lọna ti ko tọ.
  • Sensọ ko si ni ibiti tabi idiwo.
  • kikọlu lati awọn ẹrọ itanna miiran.
  • Replace sensor batteries, check polarity.
  • Move sensor closer to the main unit, clear obstructions.
  • Relocate units away from interfering devices.
Ifihan akoko ti ko tọ
  • Radio signal not received.
  • Time not manually set.
  • Ensure main unit is in an area with good radio signal reception.
  • Manually set the time as per section 6.1.
Ifihan ti wa ni baibai tabi òfo
  • Main unit batteries are low or depleted.
  • Rọpo awọn batiri akọkọ kuro.

9. Awọn pato

  • Awoṣe: AU788
  • Orisun Agbara (Ẹka Akọkọ): Battery powered (type not specified, typically AA/AAA)
  • Orisun Agbara (Sensor ita gbangba): Battery powered (type not specified, typically AA/AAA)
  • Iwọn Alailowaya: Approx. 100 m (in open field)
  • Idaabobo Sensọ Ita gbangba: Ẹri asesejade (IPX4)
  • Awọn iwọn (Ẹka akọkọ): Nǹkan bíi 8 cm (W) x 9 cm (H) x 3 cm (D)
  • Awọn iṣẹ: Indoor/Outdoor Temperature, Date, Day of Week, Radio-controlled Clock, 2 Alarms, Frost Warning.

10. Atilẹyin ọja ati Support

This product is manufactured by Auriol. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Auriol webojula.

Alaye nipa wiwa awọn ẹya ara ẹrọ fun ọja yii ko si lọwọlọwọ.

© 2023 Auriol. All rights reserved.