Ìwé Ìtọ́sọ́nà Olùlò fún Àwọn Agbọ́rọ̀ Aláìlókùn Tòótọ́ ZE3000 Ìkẹyìn

1. Package Awọn akoonu

The Final ZE3000 True Wireless Earbuds package includes the following items:

• Final ZE3000 Earbuds
• Charging Case (provides an additional 28 hours of playback)
• USB-C Ngba agbara Cable
• Afowoyi Olumulo (iwe-ipamọ yii)
• Award-winning Final Type-E Ear Tips for TWS (5 sizes: LL, L, M, S, SS)

Note: A USB charger is not included.

2. Eto

2.1 Ngba agbara si Earbuds ati Ọran

Before initial use, ensure both the earbuds and the charging case are fully charged. Use the provided USB-C cable to connect the charging case to a power source.

Atọka LED ọran:

• When the case is ko gbigba agbara: The LED indicates the battery level of the case for 5 seconds after closing the lid.
• After 5 seconds (when not charging): A blue LED blinks, indicating the earbuds are charging. When the blue LED stops blinking, the earbuds are fully charged.
• When the case ti wa ni gbigba agbara: The LED indicating the battery level of the case and the blue LED indicating the earbuds are charging will blink alternately. Once the earbuds are fully charged, the LED will indicate only the battery level of the case.

2.2 Fitting the Earbuds and Choosing Ear Tips

Proper fit is crucial for optimal sound quality and comfort. The ZE3000 comes with five sizes of Final Type-E ear tips (LL, L, M, S, SS) to ensure a secure and comfortable fit.

How to Wear ZE3000:

1. Ṣe idanimọ apa osi (L) ati ọtun (R) agbekọri.
2. Hold the sides of the earbud to avoid accidentally touching the touch panel.
3. Insert the earbud into the ear canal, then twist and gently push the earbud into place until it feels secure and comfortable.

Choosing the Right Ear Tips:

• The sound quality changes depending on how the ear tip seals with the ear canal. A perfect seal provides a balanced sound across lows, mids, and highs. A loose seal may result in insufficient bass and poor noise insulation.
• The ZE3000 comes with size L as the default ear tip.
• It is essential to choose the right ear tip size to achieve an optimal fit. Try on different ear tips while listening to music and choose the one that fits you best.
• The shape of the ear canal on the left and right ear may differ, so please try on different sizes for both ears independently.
• Approximately 60% of Final staff use different sized ear tips for their left and right ears.

How to Remove the Ear Tips: Hold the core of the ear tips and twist gently to remove. Avoid pulling them straight out, as this may damage the driver of the earbud.

How to Install the Ear Tips: Insert the ear tips into the nozzle at a slanted angle and make sure it is correctly fitted all the way.

2.3 Sisopọ pẹlu ẹrọ kan

Follow these steps to pair your Final ZE3000 earbuds with your Bluetooth-enabled device:

1. Open the lid of the charging case to turn on the earbuds. The earbuds will automatically switch to pairing mode, indicated by alternating red and blue LED blinks.
2. On your device (e.g., smartphone, tablet), turn on Bluetooth.
3. Wa fun available devices and select "ZE3000" from the list.
4. Once connected, the LED indicators on the earbuds will fade off, and your device will show "Connected".

Before Pairing with Another Device:

• Ọna A: Turn off the Bluetooth on your current device.
• Ọna B: Disconnect or "Forget This Device" for ZE3000 in your current device's Bluetooth settings.

To perform device pairing again after disconnecting, please refer to the "How to Pair?" video above.

3. Ṣiṣẹ awọn Earbuds

3.1 Fọwọkan Iṣakoso

The Final ZE3000 earbuds feature intuitive touch controls for managing media playback and calls.

4. Laasigbotitusita

If you encounter unexpected errors or issues with your ZE3000 earbuds, performing a factory reset can often resolve the problem.

4.1 How to Perform Factory Reset

1. Gbe awọn agbekọri mejeeji pada sinu apoti gbigba agbara.
2. Hold both sides of the touch panel on the earbuds for at least 10 seconds.
3. Release your finger when the purple LED lights up.
4. The reset is complete. The earbuds will then automatically switch to pairing mode (alternating red and blue LED blinks).

After a factory reset, you will need to re-pair the earbuds with your device. Please refer to the "How to Pair?" section for instructions.

5. Awọn pato

6. Atilẹyin ọja ati Support

The Final ZE3000 True Wireless Earbuds come with a Atilẹyin ọja laisi aibalẹ oṣu 12. For any issues or further assistance, please contact Amazon Customer Support.

For additional support and product information, you may visit the official Final store on Amazon: Final Store.