Ọrọ Iṣaaju
Thank you for choosing the WORKPRO 20V Cordless String Trimmer/Edger and Leaf Blower combo. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new tools. Please read this manual thoroughly before first use and keep it for future reference.
Image: The WORKPRO 20V Cordless String Trimmer/Edger and Leaf Blower, along with their respective batteries, chargers, and trimmer line spools.
Alaye Aabo
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This includes, but is not limited to:
- Ka gbogbo awọn itọnisọna ṣaaju lilo awọn irinṣẹ naa.
- Wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection.
- Jeki awọn ọmọde ati awọn aladuro kuro ni agbegbe iṣẹ.
- Do not operate the tools in wet conditions or in the presence of flammable liquids or gases.
- Ensure the battery is fully charged before use and removed when not in use or during maintenance.
- Inspect the tools for damage before each use. Do not use if damaged.
Image: A visual guide demonstrating the installation steps for the string trimmer, including attaching the nylon line spool, protective hood, flower guard, auxiliary handle, and inserting the battery pack.
WARNING: Please carefully read and understand the operator's manual before using this product.
Package Awọn akoonu
Daju pe gbogbo awọn nkan wa ninu apo rẹ:
- WORKPRO 20V Cordless String Trimmer/Edger
- WORKPRO 20V Cordless Leaf Blower
- 20V Li-ion Battery (4.0Ah)
- Ṣaja batiri
- Trimmer Line Spools (pre-installed and/or spare)
- Protective Guard for Trimmer
- Auxiliary Handle for Trimmer
- Onišẹ ká Afowoyi
Ṣeto
1. Batiri Ngba agbara
Before first use, fully charge the 20V Li-ion battery. Connect the charger to a standard power outlet and insert the battery. The charging indicator light will show the charging status. A full charge typically takes about 1 hour.
Image: A hand inserting the 20V 4.0Ah battery into the battery slot of the leaf blower, highlighting the larger battery capacity.
2. String Trimmer/Edger Assembly
- Install Trimmer Line Spool: Press together the nylon line spool and the spool cover, then insert them into the trimmer head.
- Mount Protective Hood: Mount the protective hood onto the motor head and secure it with screws.
- Attach Flower Guard: Attach the flower guard to the motor housing.
- Mount Auxiliary Handle: Mount the auxiliary handle into the operating handle and rotate it until it's at the correct angle for comfortable use.
- Fi Batiri sii: Slide the charged battery pack into the device until it clicks into place correctly.
Image: A visual guide demonstrating the installation steps for the string trimmer, including attaching the nylon line spool, protective hood, flower guard, auxiliary handle, and inserting the battery pack.
3. Leaf Blower Assembly
The leaf blower typically requires minimal assembly. Ensure the blower tube is securely attached to the main unit. Press the blower tube release button if needed to install or take apart the tube.
Image: A detailed diagram of the leaf blower, pointing out its key features such as the 20V Max 4.0Ah Battery, Variable Speed Dial, Ergonomic Grip, Blower Tube Release Button, Hang Hole, and an integrated Scraper.
Awọn ilana Iṣiṣẹ
1. String Trimmer/Edger Operation
- Titan/Apapa: Press the power button to start or stop the trimmer.
- Gigun Adijositabulu: The telescopic pole can be adjusted for different user heights. Loosen the collar, extend or retract the pole, and then tighten the collar to secure.
- Ori Ige Adijositabulu: The cutting head can be adjusted to 90° positions for various tasks like trimming, edging, or light mowing. Press the adjustment button and rotate the head to the desired angle.
- Automatic Feeding Spool: The innovative push-button spool system feeds line when needed, eliminating the need for bumping. The 12-inch cutting width and 6500 RPM no-load speed ensure efficient trimming.
Image: The WORKPRO tool demonstrating its 3-in-1 versatility, showing its use as a mower, an edger, and a trimmer for different lawn care needs.
Image: A visual representation of the string trimmer's adjustable telescopic pole, illustrating its lowest (1-1/2 inch) and highest (11-4/5 inch) settings to accommodate different user heights.
Image: A diagram illustrating the 90° adjustable positions of the string trimmer's cutting head, allowing for easy setting to the most comfortable angle.
2. Leaf Blower Operation
- Titan/Apapa: Press the power button to start or stop the blower.
- Titẹ Iyara Iyatọ: The leaf blower features a 5-speed variable speed dial. Rotate the dial to select the desired airflow for different tasks. Air volume can reach 350 CFM and airspeed 85 MPH, suitable for cleaning leaves in yards, gardens, and drains.
- Apẹrẹ iwuwo fẹẹrẹ: Weighing only 5.7 lbs with the large battery, the blower is designed for comfortable one-handed use.
Aworan: A sunmọ-soke view of a hand operating the 5-speed variable speed dial on the leaf blower, demonstrating the control and versatility it offers.
Image: A man using the WORKPRO leaf blower to efficiently clear leaves and debris from a concrete sidewalk in a residential area.
Itoju
- Ninu: After each use, clean the tools with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no debris is lodged in vents or moving parts.
- Rírọ́pò Ìlà Trimmer: When the trimmer line is depleted, replace the spool with a new one. Refer to the "Setup" section for spool installation steps. Use only recommended trimmer line (diameter: 1/16 inch).
- Itọju Batiri: Store the battery in a cool, dry place away from direct sunlight. Do not store fully discharged. Charge the battery periodically if not used for extended periods.
- Ibi ipamọ: Store the tools in a dry, secure location, out of reach of children. The leaf blower has a hang hole for convenient storage.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Irinṣẹ ko bẹrẹ. | Batiri ko gba agbara tabi ko fi sii daradara. | Rii daju pe batiri ti gba agbara ni kikun ati ti tẹ ni aabo si aaye. |
| Trimmer line not feeding. | Spool sofo tabi ila tangled. | Replace spool or untangle line. Ensure correct line diameter (1/16 inch). |
| Dinku agbara / išẹ. | Low battery charge or debris obstruction. | Recharge battery. Clear any debris from cutting head or blower nozzle. |
| Blower not moving air effectively. | Nozzle obstructed or incorrect speed setting. | Check for obstructions in the nozzle. Adjust to a higher speed setting using the variable speed dial. |
Awọn pato
- Brand: WORKPRO
- Awoṣe: B09M3H6LG3
- Orisun Agbara: Agbara Batiri (20V Li-ion)
- Ìwọ̀n Nkan: 5.7 Pounds (for blower with large battery)
- String Trimmer Cutting Width: 12 inches
- String Trimmer Speed: 6500 RPM (no-load)
- Iwọn didun afẹfẹ ti n fun ewe: 350 CFM
- Leaf Blower Airspeed: 85 MPH
- Apejọ ti a beere: Bẹẹni
Atilẹyin ọja ati Support
WORKPRO products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official WORKPRO webojula.
For technical support, replacement parts, or service inquiries, please contact WORKPRO customer service. Contact information can typically be found on the product packaging or the official brand webojula.
Awọn orisun Ayelujara:
- Visit the WORKPRO Store on Amazon: WORKPRO Amazon Store